Inverter P2 700W Pure Sine Wave Inverter 12V DC to 120V AC, Off-Grid Solar Power Converter for Home, RV, Truck, Camping, with Built-in 5V/2.1A USB Port, AC Hardwire Port, Remote Controller

The Renogy 1000W Pure Sine Wave Inverter is exactly what I needed for my DIY power bank project. It delivers clean, stable power for sensitive electronics and runs quietly without overheating. The build quality feels solid, and installation was straightforward. Great performance and reliability highly recommend for home, RV, or off-grid setups!

Good product, but not enough power for using it in semi truck. It’s still usable for one microwave or freezer but for both of them on time- shut down every couple of minutes

This thing is amazing, honestly a great upgrade in my sailboat, went with renogy because they have always backed their products and helped me when I'm having a issue with install it function. A++++

I *also* own a Renogy 2kw combined charger/inverter. That unit has an internal 30A transfer switch and is very fast to change over. HOWEVER, it has two serious issues: 1) The fan is on a LOT even when just charging lightly and 2) it has to be "on" to charge the battery bank. So this, plus a separate converter-charger, means (1) you move the plug from shore power to inverter when you need to. Or does it? Well, maybe not, if you are willing to run the same way. The reason is this: This unit is SILENT except when under pretty heavy load. So if you have a converter/charger that can deliver the amps you could turn this on whenever you have shore or generator power, the converter is on, and your plugged-in things are on this all the time. This is basically 15 amps of output (as is the 2kw all-in-one) but the transfer is manual -- other than none at all if you leave it on all the time when on shore or generator power. Is this viable? IMHO, yes, because the quiescent draw on this thing is only about 1 amp or roughly 12 watts. You can't leave it on ALL the time when there is no charge as obviously 1 amp will kill your pack BUT if you have a charge source 1 amp is not much -- and you silent operation except under heavy load. If your converter/charger fan is thermostatically controlled.... there you go. The biggest issue I have with all the integrated ones, whether Renogy, Victron or anyone else is noise level. This doesn't matter if the unit is not in inhabited space and far enough away that it doesn't matter, but if it IS in inhabited space then it really does matter quite a bit. No idea on reliability but it absolutely does put out the 120V, its sine-wave, and at least under light loads the fans never come on. Someone should figure out how to have ambient cooling except under heavy load and essentially be silent in something like the Victron MultiPlus (or equivalent Renogy) units, but until they do if noise is a factor separates win for that reason, along with charge being independent of the inverter being turned on.

Worthless, tech support horrible, under warranty but will not replace/refund. Let me explain further… I purchased this inverter for an off-grid Solar charged battery bank to run my Starlink and wifi camera, along with a 7k btu window unit. This setup is located in the Atchafalaya Basin, Louisiana (think the TV show “swamp people” that’s where this camp is) in the “middle of nowhere”. The battery bank consists of (8) 100ah 12v Flooded Lead Acid batteries wired in parallel for a useable 400ah bank. Batteries are wired together properly with 2/0 gauge jumpers and connected to the inverter with 3’ 2/0 gauge pure copper cables. Battery bank is charged/maintained by two Renogy charge controllers (1) 40amp MPPT with (4) 100w panels connected 2x2 (2-200watt strings). The second Renogy Charge controller is a 60amp MPPT with 3x1 240 watt solar panels. Plenty of power for what I want, and yes I know I could get more with a 24v system… but I went with Renogy 12v… big Mistake!! Everything worked fine for about two months. The Starlink was on, camera working, and I was able to turn the Wifi AC window unit on during the day to dehumidify the camp. Then one morning everything turned off, which required a trip down and 30 minute boat ride to investigate. The yellow GFCI light was on. So I wired the AC unit to the load terminals that supposedly provide more power, flipped the switch back to on, tested (and it worked) and returned home. Next day it happened again. So I called Amazon (who was the most helpful during this fiasco). Amazon directed me to Renogy because I was outside the 30 day return window. Renogy advised I needed to ground the inverter and use 4/0 wires to the 3000watt inverter. Note there isn’t anything in the instructions that specify what cables are required/recommend. So I make the long haul again with 10AWG stranded insulated copper wire, 8 gauge pure copper wire, an 8’ grounding rod, and brass grounding connectors. I sink the rod about 20’ in the mud, run the 8awg solid copper wire into the camp, and ground the inverter using the recommended 10AWG insulated stranded copper wire. I make the connection to the inverter using 2’ 4/0 pure copper cables, test, (it works!), and I return home. Next day everything shuts down again. I called Amazon who put me though to Asurion (I bought the insurance), who routed me back to Renogy because it was still under manufacture warranty. Renogy asked if I had performed any multimeter tests, which I had for my own curiosity (not directed to do so by Renogy) and so I reported my test results… 13.8 v DC no load, 120 v AC no load. Renogy said they needed picture evidence. I asked if I they could save me another trip down and allow me to return/replace the inverter, and they said no, no, no. I asked several times because I felt they just kept making things up for me to-do and not honor their warranty. They said I could return it (but wouldn’t allow me to do so) and they could test it, and if they found nothing wrong they would charge me for testing and shipping. At this point I really don’t trust them to “test” the inverter and accept that there’s something wrong with it. I tell them they need to honor their warranty, they direct me back to Amazon. PLEASE DO NOT BUY THIS INVERTER!!! Save your TIME and MONEY and buy another brand!!

no lo pude usar no me sirve este equipo pues es de la mitad de la capacidad del equipo comprado llego uno de solo 1000W y compre uno de 2000W No puedo creer este error me frenó el equipamiento de mi RV y es básico este equipo, suspendido mi viaje una empresa como RENOGY debe responder Enviando el equipo comprado

This 3000watt inverter came quickly and on time. It was well packaged and simple to install. I got it hooked up to 500AHR 12volt battery bank in my trailer and the thing ran my AC unit and my fridge!! Obviously wouldn't do that lomg term as batts would drain fast, but it is nice to know, when off grid we can make toast and brew coffee at the same time! Very happy with the unit... I have only just installed it so have not used it for any length of time yet, but so far, so good!

I bought this 1000W on a promo mainly to run my chest freezer (149W) and fridge during an extended power outage. This model is great for that and barely dropped the power in my 100Ah LiFePO4 for about 8 hours. Already have three 50W hobby solar panels so in theory could extend for days. This model does not have enough power for a microwave (mine is 1300W) but I was aware of that when I purchased. Recommend you use a Kill A Watt device to determine before you place order. Cables are heavy duty and fan never came on during this minimal load. Love the fact it's pure sine wave, I can move it to friends house/camping with battery or run /charge off of car as well! Way cheaper and lighter than those solar generators if you already have some of the components

Tengo unos cinco o seis años experimentando con energía solar. He tenido inversores de otras marcas. Tengo un EPEVER de onda pura de 24V, con capacidad de 1500W que si alimenta un UPS con 111V de AC y de ahi 3 servidores y el modem de Telmex. Pero la energía es muy rara. Si le conectas una laptop, el mousepad deja de funcionar. Y el modem de Telmex reinicia la conexión y la IP (no el aparato) con frecuencia. Tengo un SAMLEX de 450W de onda modificada (12V). Al conectar el UPS ni siquiera reconoce la energía. Pero funciona para conectar laptops (sin que el mousepad deje de funcionar) y cargadores de teléfonos. Además es muy ruidoso. Le tuve que cortar el ventilador interno y ponerle uno por fuera. ¡Este RENOGY de onda pura de 700W está muy bueno! Le conecté el UPS y genera 116V de AC estable. Los servidores funcionan bien, y el modem de Telmex no se ha reseteado en dos días. La energía es muy limpia. Si le conectas una laptop funciona perfectamente. Ahora lo tengo con un consumo de 206W aprox durante el día, con un panel de 450W nominales y un controlador MPPT Epever. Los ventiladores hacen un ruidito muy discreto. ¡Además viene con dos cables de calibre 6AWG! Nunca me había venido uno con los cables incluidos. Y tiene un control remoto alámbrico, que no he usado. El empaque, la construcción del aparato, el manual que trae. Todo es de excelente calidad. Vale la pena pagar un precio mas alto por un aparato de buena calidad. Actualización 21/SEP/2024: Lo que NO está bien, es que escribas una reseña positiva, y le suban el precio el 35%, de $2,400 a $3,700. Quise comprar uno mas. Y no lo haré a ese precio. :-(

Works exactly as advertised, very happy with the purchase.