









🔥 Elevate your Jeep’s roar with precision-engineered power!
The ETL Exhaust Kit is a tailor-made axle-back system for Jeep Wrangler JK models (2007-2018), featuring a 2.5-inch high-flow exhaust diameter and corrosion-resistant 409 stainless steel construction with matte black dual-wall tips. Designed for easy, no-cut installation, it delivers enhanced performance and rugged style.





| Manufacturer | ETL Performance |
| Brand | ETL |
| Item Weight | 27.8 pounds |
| Package Dimensions | 39 x 22 x 10 inches |
| Item model number | 332001 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 332001 |
A**R
Good
Taking the old exhaust off was a pain in the behind. It took me an hour of shimmying off the old one it was so stuck on but once that was off installation was a breeze. People complain about getting the brackets out of the rubber grommets which yes is very difficult if you plan on keeping it in tact. Personally I just used a sawzall and cut it off. I did find however that if you use a pair of channel locks and push on the head of the pin and pull on the rubber at the same time it came apart pretty easily.As for the exhaust itself it is pretty nice. It has a nice low grumble on a cold start and when you're revving at 3k rpms and higher. Other than that you don't hear it really. Personally I like to have it audible at all times so it's not quite what I'm looking for but for 300 bucks that's kind of what I expect. If you want something low profile it does pretty well
R**T
Great system
The system arrived and it was made of good quality, no issues. The install was easy and matched up to the hangers and existing pipe.The sounds is aggressive at start up and acceleration until you get to the cruising speeds and then you don’t hear it as much, which is what I was looking for. I have a soft top so I didn’t want a super aggressive tone as I am driving for a long period of time at cruising speeds. I can’t complain about anything at this point, if anything changes I will update. Great but for a decent price.
N**B
Better than stock
Sounds good for a v6 not like a civic and seems to be built well only thing I didn't like was the dual pipes hang a little lower then I I would have liked but all in all it's a nice axle back exhaust system for the money
T**U
Best bang for your buck, so far
Right out of the box, its looks very well built, but time will tell how long it will last. It was a snap to install onto the existing Jeep rubber hangers on my 2013 Wrangler; the hanging and clamping to only about 30 minutes. I would highly suggest cleaning the Jeep tailpipe with an abrasive like 100 grit sandpaper or equivalent as to make the transition slide on easier. The muffler exhaust extensions are slash cut and heavy; better than I expected. I would liked a better sound, the sound I get when revved is like that of a teenager's Honda Civic. At idle, it sounds throaty, but when at highway speeds, you have a droning sound, but what can you expect when you don't have headers. Why pay 500 bucks for any other item, when this one is the best bang for your buck? Time will only tell how long it will last, but it is heavy steel and well built, so I believe it will outlast the Catback and the Dynomax.
G**G
its not the best but not the worst
Exhaust showed up in okay packaging, the build quality is what you pay for, welds are cheap, painting is cheap. Installation was pretty easy except getting my old jeep’s exhaust off, it took a lot of wd-40 and an impact gun/rubber mallet. After installation the exhaust seems to want to loosen up, had to put tack welds in to hold it in place correctly. The sound is pretty good, a little droney with the doors off. No signs of any hp increase or torque increase after dynojet run but there was a lot crisper throttle response. At the end of the day I didn't expect anything more out of this system. Going to purchase the magna flow system and be done with it.
N**K
Glad I bought it
Honestly wasnt expecting much outa this but was thoroughly impressed by the sound. Not much drone in thr cabin at all. Sounds mean!! Instalation took around 2 hours but that's cause we didn't have the right tools to take the old muffler off but installing the new muffler took literally 20 minutes and went on super smooth. Fits perfectly! Looks mean and like it belongs on the jeep!
J**E
Great muffler for jk
Way better than stock, perfect level of rumble, beats stock by alot. I am very happy with the purchase
S**N
MUST HAVE!
The media could not be loaded. All I can say is.. buy this exhaust if you have a JK/JKU! Old exhaust was a PIA to get off but this one goes on with a breeze! I paired this exhaust with a corsa cold air intake and it sounds amazing! At first I was a little disappointed because I like my cars louddd and driving wasn’t as loud as I thought.. until I opened up the back glass on my Wrangler and BAM, sounds absolutely amazingggg! Throaty deep tone, a little crackle when you get on it. Advantage is I have a 6 speed so I can make it growl as much as I want, but I have to say it has a perfect tone between 2500-3000Rpms. No droning that I’ve noticed with my hard top blocking out most of the noise. Going 60-75mph my tires hum louder. I have to say it’s the perfect exhaust if you don’t want to sound like an annoying civic hauling by! HIGHLY RECOMMEND!
Trustpilot
2 months ago
2 days ago