Neutral Base, 8 oz, Wood and Grain Filler, Stainable, Tintable, Sandable, Zero Waste, Non-Toxic, USA Made

This is a great product if you know how to use it and know what it can be used for. A lot of people have given negative reviews because: 1. Mixing it 1:1 creates a watery mess / it's too difficult to work with. - I personally think using 1:1 water to filler ratio as a starting point is too aggressive. You only want to add enough water so that it can be worked around. It should end up looking/feeling like mud. And I personally prefer it just a tad bit drier (it gives you less time to spread it around before it dries, but I find it easier to work with). Don't try to mix/use the whole bottle at once. If you haven't used it before start with a glob and add some water. If you use too much water, add some more filler until you get the consistency right. It's easier to add water than it is to wait for the mixture to dry out if you've added too much. - Don't use a rag to spread it around. It's way easier to spread around and provide sufficient pressure to force the filler down into the grain if you use a plastic squeegee (a credit card also works). I personally think it's easier to work with this way if your consistency is a bit off as well. 2. It doesn't create a uniform surface / disintegrates, breaks off, or erodes away. - This is not wood *putty*. This is wood filler. They are two different things. Putty is more like playdough and is meant to be formed into the wood more like such. Wood filler is far more viscous than putty; it's meant to fit into/in between the grain. If you're trying to fill a gouge you need to look for putty. The first review on here with the pictures of the repaired chair is astonishing. I have no idea how that person even managed that, but I can guarantee you that sort of repair work will NOT stand the test of time with this product (or even putty for that matter) unless you plan on keeping whatever it is you're repairing in a glass case. If your furniture is that damaged, your best bet is going to be an epoxy filler. Hopefully these tips can help. If anyone is wanting more details on how to use either water-based or oil-based fillers and/or how to incorporate either of these with various types of finishes I would highly recommend "How to Understand Wood Finishing : How to Select and Apply the Right Finish" by Bob Flexner; this book is the alpha and omega of finishing.

Absolutely awesome product! Matched the wood grain and was so easy to apply to get rid of seam cracks between the wood planks in my floor. Simply press the putty into the cracks and wipe over with a damp paper towel. I’m really impressed!

I grabbed the Neutral Goodfilla mostly for grain-filling an oak desk, but it’s turned into the catch-all fix for every nick, gouge, and pore around the house. The paste spreads like cake frosting, levels itself in the grain, and after 15 minutes is ready for 220-grit, no waiting overnight, no mystery shrinking the next day. First project was an oak desktop: one thin swipe, light sand, then stain. The filled sections took color so evenly you can’t spot where the pores were. Since then I’ve tinted small batches with water-based dye to patch a walnut coffee table and even mixed in black pigment to fake ebony plugs on a pine bookshelf. Cleanup is just a damp rag; brushes rinse out under the tap instead of soaking in solvent. • No cracking or sinking, even on deep screw holes • Accepts oil, water, or lacquer finishes without blotching • Fine sanding dust -won’t clog paper after two passes Minor warning: leave the lid loose for even an hour and the top skin starts to thicken, so I press a circle of plastic wrap against the surface before sealing the tub. Small hassle for a filler that’s saved me at least three separate products. If you work with open-grain woods or just want a ready-to-tint patching compound, this 8-oz jar punches way above its weight.

Finally got to use it, great product. Would definitely purchase again.

Im very new to woodworking. I made a table using oak for the legs and mahogany for the top. The oak legs were stained very dark almost black. I had a 2.5in piece of mahogany that is very dark and beautiful. At least I think so. The remaining boards are multiple shades lighter than this dark piece but still have attractive figure. I wanted to keep most of the natural color my mahogany had but add a very mild red tint. Secondly, I discovered mahogany has a pretty open pore structure so I wanted to fill the pores in to hopefully arrive at a smooth finish. I mixed about 2 Tbs filler to 4 Tbs water. After a quick stir with a stir stick, I arrived at a very liquid consistency like red water. I didn’t want to slather a thick paste on my work surface because I imagined the removal of a thick paste being a hassle. I applied the solution using a cheap foam brush covering the surface just enough to fill in the pores. I left this to dry for a few hours. Sorry I don’t remember how many hours but I did make certain the wood was completely dry. Lastly, I used 320 grit abrasive paper before applying the filler so I continued on with the 320 grit to remove the excess filler. I’d never made a coffee table, never used mahogany wood and never used a filler prior to this project. Having never used a filler, I have nothing to compare it to but I was very pleased with the ease of application, the color and the smooth texture after filling the pores. According to the directions, you can add stains, dyes etc to the product if you desire a different shade. Hope this helps you decide if this product is right for you.

never hardens, fills the gap but does not harden

This is a really great product. Does exactly what the company says it will do. I moved in to an older house where the much loved wood mantel had hundreds of pin holes I would assume for Christmas stockings etc. I very lightly sanded down the rough areas filled with the wood filler then a very lightly rub with a cloth. When dry painted the wood. Looks great no visible hole marks.

The colour was great but product was very dry and crumbly. Used another product and added a bit of water to see if I can use this at another time. A bit disappointing for my project.

I first ordered the smaller size to see if I liked it, and immediately ordered the bigger size. Works really well and smells great! Dries quickly and doesn't create a large dust cloud when sanding. Highly recommend and will be buying more in the future!

Has a great set up time. Enough time to spread it around & reasonable set up time. Gives that aged/old look to new wood.

Oh man, this stuff is awesome. Easy to work with. The color matching for my project was spot on. Clean up is a breeze. I sealed with an oil based sealer that matched the flooring finish. Super duper happy.