VIVO Triple Monitor Height Adjustable Desk Mount, 2 Pneumatic Arms, 1 Fixed, Counterbalance Stand, 17.6 lbs Weight Capacity per Screen, Max VESA 100x100, Fits up to 32 inch Screens, Black, STAND-V300G

Bloody amazing! Well worth the money! I have 3 Samsung G5 32” curved monitors and fits perfectly! I’d most certainly recommend get this if you have a deep desk because the middle monitor sticks out a good bit but honestly it’s awesome, super easy to build and put together, all metal components, the 2 side monitors are extremely easy to adjust up and down and holds the monitors perfectly, I only gripe is that I can’t easily lock them in tighter but they don’t shift for sure! Just need to sort out some cable management ha! Would recommend to anyone, spend the extra bit of money and get a better experience with solid metal arms!

TL;DR version: I'm impressed. Rather fiddly to set up, with unclear instructions (video helped a bit), but it does everything I want it to do. Suboptimal management (cables need to run behind central pole), so came up with a workaround. Really sturdy - I've no concerns it will fall. Overall I'd say a 9.9 out of 10 but some room for improvement. I had very specific requirements. The stand had to have small leg-print (previous solution took up half the desk). The stand had to be very sturdy (safety top priority). The stand had to be clamped only (no drilling through my desk please). The stand had to be able to cope with a slightly tapered desk edge (so the clamps needed to be inset by an inch). The stand had to position three 24" (HP) monitors at the correct height (top edge equal to my eyes) and preferred angles (slightly angled inwards). I looked at every stand on the market (Amazon sells around 10 potentially viable options) and narrowed it down to this one and two others (HUANUO and BONTEC, with neither of which I was familiar, but nor had I heard of Vivo). Being Amazon, it arrived next day, which is always exciting. I unpacked the box and read, and reread several times, the rather poorly written instructions (hint: hire a decent technical writer). I eventually got the hang of it. It became apparent that for three 24" screens, it's not needed to use two of the arms (one on each side), but three. rather than five, were sufficient. In fact, with all five, the screens: (i) sat far too high on the desk; and (ii) had too acute an angle compared to what I needed. It was very fiddly getting them precisely into position but with micro turns of the allan keys, I was able to get it precisely into position, which looks amazing. The cable management system is not great. Cables show behind the main pole. I've put them in a sheath and used cable ties, but a cleverer system would have been to make the central vertical pole hollow so cables could be threaded through it. But I'm being very picky on this - my workaround works. The attached picture was taken before the last micromovements to level everything out out using spirit level. That took a couple of hours but worked well.

boyght for my son msi 27" curved monitors and have to say it really is a great peice of kit. Well worth the money and so easy to fit. The gas rams on the extended arms make it so easy to get the monitors in the correct place then just lock them in with the supplied allen key. I would happily recommend theis triple vesa mount to anyone

When assembling this mount it is very heavy which gives good confidence of the sturdiness of the product. The assembly was really easy with very clear instructions. It felt sturdy once bolted to the desk but it would have been nice to include a post mount as well as the clamp style mount. With the clamp style mount it has, it needs to sandwich the desk by sliding onto the back of the desk. A lot of desks (mine included) have a panel at the back or a support, normally holding your cable management tray. I managed to fit it but basically had to cut a big square out of the back of my desk which was not fun. Unfortunately there are not a lot of options for triple monitors over 27". Yes it does actually fit the three 27" side by side. Other stands I tried just blatantly lied about that so this was not the first one I had to buy. The counterbalance feature is great, once the pre-tension is adjusted it holds the monitor exactly the height set to whilst still being adjustable. The arms swing freely but stay in place. The tilt is a little fiddly as it has to be fairly tight to stop the monitor drooping but that makes it a little jerky and stiff to adjust. The tilt just seems to be a pinch bolt (Alen key provided). The rotation however is terrible. No adjustment in the tension its just a really tight rivet. It will rotate all way to portrait but you would not really be able to keep your cables tidy if you wanted to have that option. The cable management is not great. The first arm with the pre-tensioner in has two little cable guides that click in which are not too bad. After this though, the bottom of the arms are mostly open with bits of plastic trim that you just push your cables into the hollow space inside the arms. this is OK until it gets to the joint between the arms where the cables have to come out of one arm and back into another arm. Again not really too bad as they are mostly hidden due to being behind your monitors (unless you can see the back of them in your room set up). The biggest problem is when the cables reach the post. The little plastic clips for the post are not strong enough to hold onto all the cables. Bearing in mind you will have a minimum of two from each monitor totalling 6, then if you are utilising a USB hub or audio, maybe another 3 or 4 from the centre monitor. The clips just are not big enough. Where the clips end at the bottom of the post there is just no cable management after that. The post has plenty of height adjustment. The VESA mounts are obviously standard and fit the two main sizes (100mm and 75mm) but annoyingly they are not square. They have big radius 'ears' on the corners and this could cause problems with recessed VESA mounts on the back of the monitor. I had to make some shims to bring the monitor away from the mount on my Gigabyte G27. It does the job and all the adjustments are there. Just be wary that you will really need to sort the cables out yourself and have a desk with no back underneath.

Fungerar som den borde. Bytte monitor arm då mina nya skärmar inte fick plats på den gamla. Enkel att skruva ihop. Håller mina 32" skärmar på plats på ett snyggt sätt. Om man måste hitta något negativt så kunde man gjort det enklare gömma kablar.

بشكل عام ممتاز لكن فيه فراغ بين القاعدة اللي على ظهر الشاشة والحديده اللي تشبك معها حليتها بورقه دخلتها بينهم

Solide et facile à monter

I'm not a stranger to VIVO products. I have had good experiences with all its products I own except this. This was an easy install process but the pneumatic arms are fixed on maximum height. Every attempt to adjust the tension failed as it tightens just when I feel it's about to loosen up. Support advised to make 15-30 turns clockwise for light monitor and anti-clockwise for heavy monitor. I believe I've made about 100 turns trying to figure this out but still not fixed. Unfortunately, I will have to return this product. I hate the process of disconnection and packing this up. Update: So I decided to keep adjusting the tension as directed in manual just more than required. The tension was loosened and I was able to set the desired angles and height. Glad I don't have to return again. The product is sturdy and of good quality.

Build seemed solid. However out of the box one of the arm seemed scratched down to the metal below. Don't think it will affect the ability to hold up the monitors but disappointing nonetheless for a new piece for my new place.