Allparts BP-2005–010 Tremol-No Chrome

Here's the thing. This works great, at least for a while. However the screw locking parts are quite small and they seem to work loose with the natural vibration of the guitar, so at some point you will find yourself hunting one or more of them down. The same goes for the locking attachment to the block, the very tiny screw came loose and the whole assembly fell apart. As a consequence of this the mechanism has developed a tiny bit of slop in the hinge joint, which means the hinge vibrates when you play and that is transferred to the strings, so the strings vibrate, VERY noticeably. With a more secure means of locking the thing down as required this would have been great. Removed and wont be replacing.

Excellent, easy to install and it works.

Se ben montato e settato é una delle soluzioni perfette per rendere il vostro ponte flottante, fissi

Great product, top quality. it was easiest to install with the strings attached if your 2 point system tends to fall loose. Also having the strings on balances the spring tension while installing. Directions and procedures to install on all types of trees would be helpful.

持っているギターは、ガスリーモデルでもこの Tremol-No がついてないものでしたが、後付けで付けました。ダウンオンリー、フィックスと出来る様に。弦交換が楽になりますね。

This is such a great device! These now go on ALL my tremolo based guitars. - Fixed Bridge: Tighten a couple thumb screws (can be done quickly in between songs on stage) and use as fixed bridge. This can not be underestimated, fixed bridge improves tuning stability and string bend evenly (no lag from tremolo springs). And tuning is faster, no retuning strings multiple times because your spring is stretching because you tuned the other strings. Plus you can retune to drop tunings without changing guitars. Plus it makes it much easier/faster when changing strings, especially changing one string!!!! - Tighten one screw and use as dive only tremolo; (tuning stability) and can be done in seconds in between songs on stage. Also re-tune to drop tunings without having to adjust your tremolo springs. - Use your guitar as a standard floating tremolo by loosening both thumb screws. - This is not a bad thing to me: you will need to leave you back plate off it your plan to change the settings often. if you plan to set it and forget it, you may not have to leave it on. The first version of the Tremol-no stuck out ever so slightly so my back plate wouldn't go back on, but it looks like they have fixed that in this version. Your tone is supposedly better without back plate any way. - You can install yourself. just use common sense when removing springs (read instructions). hold hand over springs to they don't go flying. TIP: you may have to tweak the angle of the arm every so slightly so it moves smoothly. Follow instructions. I had a Suhr guitar that seems to work better/stay in tune when there was a tiny angle to slide arm. A 2nd guitar & 3rd guitar where I didn't need that angle. Follow instructions, listen to hear if slide is rubbing or binding. Also, I had to adjust the tension on my springs afterwards, no big deal (the wood screws)

This fits perfectly my Original Floyd Rose tremolo and keeps the Bridge in tune. It gives the option to completely lock the bridge or but it in dive mode only locking only one direction of travel. I recommend to use 4 springs on the back.