does this affect the car battery life?

Car battery is a process of cyclic charging and power supply. We recommend that you only use it when parking for a short period of time. If you park for a long time, for example, more than one week, you can disconnect the power cord. The AZDOME 3-lead Mini USB Hardwire Kit is a power management device that provides power to your dashcam from your car’s battery via fuse box to keep your dashcam continuously running even after your engine is turned off to utilize the 24HR Parking Monitor feature. Low Voltage Protection Comes with a sensitive voltage sensing switch, it will monitor the car battery voltage in real-time. Once the voltage is lower than 11.6V (12V input) or 23.6V (24V input), it will cut the power supply, and leave enough power to ignite the car's engine for the next time.

So. Do you have a instructions for connect to ford transit 350 2017 ????? It’s very hard for me. Because you’re instructions doesn’t work….

Steps: 1. Please connect the red wire to ACC, the yellow wire to always powered, and the black wire to ground. 2. If the AZDOME hardwire kit is connected correct, find the "Park" menu in the menu, press OK to select connected, tick parking monitoring, and press the menu button to exit and save the settings 3. Once the car turns on ACC, it will automatically turn on, and once the car turns off, the camera will enter time-lapse video parking monitoring mode automatically when hardwire the camera correct. You can also search YouTube “how to connect 3-Lead hard wire with a dash cam” for demonstration videos. Hope this was helpful. Warm regards, Sunny, AZDOME Customer Care

what kind of and how many batteries does one need to purchase separately for this device?

No need to purchase battery separately, this hard wiring kit wired with the fuse box in the car and uses car's battery.

How to find lowest allowed battery level?

Hi Friend, Thanks for reaching out to us. The AZDOME 3-Lead Hardwire Kit will monitor your voltage status and cut-off the power to the dashcam if the voltage drops below the conﬁgured value more than 8 seconds. And reserves enough power so you can start your car for the next time. You have four different conﬁguration choices that you can select when you want the power to be disconnected to the dash cam when the battery’s voltage reaches certain level. Make sure to test and identify the minimum necessary battery voltage you will need to start your car for the next time before you set to the lowest setting. We recommend that you start with the highest setting, and then test and press only one voltage option in sequence to ﬁnd the suitable battery voltage that will give you enough battery power left over to start your car for the next time. Four Options of Low Voltage Protection: For 12V Battery: 11.8V 12.0V 12.2V 12.4V For 24V Battery: 23.6V 24.0V 24.4V 24.8V Note: If you press at the same time to select 2 or more options, or do not select the voltage option, this default voltage cut-off is 11.8VDC for a 12VDC battery and 23.6VDC for a 24VDC battery. 12.2V or 24.4V recommended for most users in general driving conditions. Hard-wire kits, there are 3 wires that need to be connected: ·A RED wire (BAT+), needs to connect with constant fuse, which can provide power to dash cam even when the vehicle is off. ·A YELLOW wire (ACC), needs to connect with Fuse Box ACC, which can make the dash cam auto power on&off when the vehicle is on&off. ·A BLACK wire (GND), needs to connect with metal bolt or screw, which can prevent electric shock. NOTE: The Parking Mode only works on dash cam that has the function of detecting ACC, this will make your camera record based on your camera’s parking mode setting. Always refer to the vehicle owner’s manual to avoid fuse slots that could pertain to important safety features within your vehicle. For example, avoid fuses that controls airbags, stability control programs, etc. Fuses that control certain elements such as the radio, garage door opener, sunroof, etc. are usually safe to use. Hope this is helpful. Best regards, Sunny AZDOME Customer Care

Brand	AZDOME
Manufacturer	AZDOME Tech
Model	JYX02
Model Name	AZDOME 3-Lead Acc Mini-USB Port Hardwire Kit
Package Dimensions	16.1 x 8.89 x 5.41 cm; 240 g
Item model number	JYX02
Compatible Devices	Dash Cam
Special Features	Reverse Assist, Time Lapse
Mounting Hardware	Cable, Hardwir, Cigarette Lighter
Number of items	1
Standing screen display size	2 Inches
Display Type	LCD
Batteries Included	No
Batteries Required	No
Connector Type	USB
Actual viewing angle	140 Degrees
Does it contain liquid?	No
Manufacturer	AZDOME Tech
Item Weight	240 g

AZDOME 3-Lead Acc Hardwire Kit Mini-USB Port for M550 Dash Cam, 12ft with Fuse Kit, for Dash Camera 24H Parking Monitor Mode, Converts 12V-24V to Output 5V/2.5A Max, Low Voltage Protection

Details

Description

Specifications

Common Questions