Dupli-Color AFM0271 Scratch Fix All-In-1 Exact-Match Automotive Touch-Up Paint – Ford White – 0.25 oz. Paint Pen

Matched perfect, easy to use. Would buy again if I needed more. I used this on a 1996 Ford that has original paint.

Work great.

NOT as easy as it looks.I watched a ton of their videos and they make it look super easy. It is if you are looking to just make sure your car doesn’t rust where it is exposed, but it is not going to be pretty.The paint applicators are not very precise.The one is like painting your nails. It came with a few strands curled and would not straighten. It was medium to low quality and would not apply very well or correct the amount easily. I had it often where it would pool too much paint and have a drip form at the bottom. I couldn’t get it to soak up the extra.The felt pen like applicator, as I understand it, is for more precise application. It was not. It poured out more than the other applicator, even after trying lightly. It was either pouring out or not at all. Again, drops formed.The color was a touch darker than my car, which I matched according to the paint code in the door. It wasn’t significant, but I noticed. My car is 10 years old and it may have faded, but that has to factor into the viability of using a product like this.The applicator for the clear coat was a bit more manageable. It was like a sponge on a stick in a triangle shape with the tip of the sharper angle for application. The clear coat goes on nicer, but mounds over the previously applied paint. It is noticeable after it dries, but it is small enough you don’t see it from afar.I work at an automotive repair shop and so had access to a garage to maintain the temperature properly. One of the paint guys even commented that it looked decent for what it was. Maybe I expected more out of this than was reasonable? Just know it isn’t going to restore it, I guess. That is what you pay the big bucks for when you take it to a body shop.I was hoping it would look nicer than it did. I am a practical person, so it works for me to prevent my car from rusting, but I cannot overlook the small disappointment of the appearance.

I'll cover a few things first, the packaging is confusing. ALWAYS stand the paint with the fat end down, with the label facing you and readable, remove the top cap by unscrewing it and the brush will be facing down into the paint, unscrew the bottom to access the foam brush with the clear coat. do NOT hold the paint with the label upside down or you will spill everything when you open it. If you are repairing your Tesla Model 3 Rims, the color is spot on. To make a perfect repair, do not rush and just apply the paint to the scraped rim. . Just applying paint will look better than the scrapes, but not very good. Get fine grit sand paper and sand the surface flat first The color match will be so close you will not spot it afterwards. I sanded with two different grit sandpaper, applied gray primer, and let it dry for 24 hours before applying the first coat of paint. Let it dry a good amount of time, because the first coat of paint will tend to liquefy if you apply the second coat too soon. The paint is actually quite thick, so be aware that when you start the painting process. I didn't use the clearcoat because the color and shine are so close to the original paint since I scraped my rim after owning my new car only three days. I compiled this from my experience using it and confirming the advice given by other users. A side note, the paint has a pressure sensitive point that will apply paint by pressing the tip to the object you wish to apply the paint to. I don't recommend using it on the rims. it tends to apply thick blobs. Also, there is very little paint in the kit, so be sparing with it. The picture is the actual repaired rim, and the damage was pretty obvious. Take your time, and be patient, the repair will look great! I hope this helps,

No surprises. It matched the silver color of my 2018 Nissan Maxima, and worked exactly as described.

Perfect match but you can still tell when close the car had this put on the paint.

I have a 2022 RAM that came in flame red paint and I thought for sure I'd never find a touch-up paint that was an exact match. Boy oh boy was I wrong! Quick backstory as to why I needed this paint, I had some curious bears knock my garbage cans over and into my RAM, scuffing up the area highlighted in the picture. I ordered this touch-up paint because everywhere I read it was mentioned as the best solution for the job. I got all the supplies I needed, and some wet sandpaper 2000 grit to sand the clear coat.Some observations, if you can avoid it, do not use the pen. I did some testing on extra material and realized quickly that I had way better control with the little brush. Also, the clear coat dries crazy fast. I applied it, and within minutes it was quite tacky. I'm glad I did some testing before actually applying it to my truck. Overall, it's really easy to use, matched exactly, and I couldn't be happier.