CO-Z Airbrush Spray Booth with Dual Fans & 4 LED Lihts, Folding Painting Booth with 19.5 cm Turntable, Portable Hobby Air Brush Booth with 140 cm Exhaust Hose for DIY Painting Model Craft Cake More

Compact, easy to assemble. Dual speed fan is quiet and effective. The lighting is great. I find the carry handle to be a helpful feature. The exhaust tube is a little short but is easily upgraded. Properly sized replacement filter pads are available on line. Recommended.

I picked this up to complete my first dedicated mini painting space since I started the hobby 4 years ago. It went together easily and feels sturdy, but doesn't fold down as compactly as my old unit with the fan in back. That said, the dual-fan model definitely works a lot better, to the point where my wife isn't smelling paint fumes even after a long day of priming models. The lights are sharp and well-directed to give you the best view of your tiny details. The best part is that the top-mounted exhaust design gives me a lot more flexibility when deciding where and how to vent. That said, the elephant in the room is the noise level. The dual fans are quite loud, to the point where I can't run this unit at night since my painting space is right next to the master bedroom. It's barely audible over our white noise machine, meaning it won't wake anybody up, but it could definitely keep them from getting to sleep in the first place. Still, I'm very happy with this purchase and have already recommended it to others in the hobby.

Fantastic Nice quality. Works great. I would be happy to recommend this to a friend. The only thing to be aware of is that when it is turned off it does allow outside air to flow freely into the house. I am going to cut out a piece of wood to block filter when not in use and there are notches already there that will hold it flush and in place nicely.

Works well: no more airbrush fumes in the apartment or paint in my nose. (When I pull the airbrush it's for 60-150min sessions) Setup takes a few minutes. Folding it back takes a few minutes as well. Every bit (except the exhaust tubes) goes within the main compartment, which makes for an almost convenient storage. (It's huge though). It's humongous (fine I guess) and very noisy (less expected and slightly annoying). I'm fairly satisfied with it.

This is an awesome spray booth. Strong fans, bright lights and it snaps together great. Very happy with this purchase.

Compared to the smaller Vevor unit I had before (dual fan, not vertical exit) I'm much more pleased with this! Much more space efficient and actually fits my table. The smaller Vevor was 27" deep once assembled, and my table is only 23" deep. The power cord is the first big improvement with it being about 8' long instead of the Vevor's 2' cord. The light attachments on the side also give the booth more robust support. I also appreciated that the extraction funnel is screwed into the unit instead of a snap in giving it a much better seal. I do agree with other reviews that on Hi mode it is fairly noisy compared to the Vevor, but not unbearably. Overall very pleased with the quality of the build and design and a better price point than the Vevor was.

I live in a tiny apartment and build gunpla. I was skeptical about fume capture with this in such a small space, but gave top coating a try. The AQI meter briefly hit the red (wear your respirator!) and went down to green rather quickly. It's not too loud with the fans going and kept the fumes out during the off-gassing process while the top coat settled. Setup was easy peasy as well.

Summary: exactly as advertised, recommended with no reservations. Model #: HS-E550 (two fans, variable motor speed and light brightness, exhaust ducting provided.) Note: as far as I can tell there are only two basic, Chinese-made units being sold, single- and double-fan. Pick the additional features you want and shop for the best deal. Shipping: the unit was well packed, the carton arrived sealed. The turntable and power supply were loose, but undamaged. The latter is a function of the destination country, as the unit itself is 12VDC, 5A universal, so I'm guessing the importer inserts the appropriate power supply. Assembly: very easy, I only needed the pictures to assemble (text is also provided). Usable inside area for the hobbyist: 20 inches wide x 12-3/4 inches high x 13 inches deep, back corners slightly reduced by 45-degree angles. Ducting: will fit standard 4 inch vent ducting and/or clothes dryer exhaust ducting kits available at any USA home center. Unaltered the hobbyist can place the tapered duct end outside of a window. Noise level: the manufacturer claims 53 dB. The fan speed can be adjusted. I measured noise levels with the Android sound meter app. The app measures standing in front of an operating kitchen microwave as 63 dB. With the sound meter placed in the location of a spray-painting operator, the unit at full power has a noise level of 67 dB, half power 63 dB, lowest setting 47 db. The unit itself is barely audible behind a closed door. As someone who operates a hobby woodshop (always with hearing, eye, and breathing protection!) the unit does not seem loud to my unprotected ears. Light level: adjustable, very bright at full setting. The light color is close to daylight, perhaps with a very slight blue tinge. I would estimate the color temperature at around 5000K. Filter: the filter elements can be removed individually from the back wall of the hobbyist side (i.e. they can be removed from where the painting is done). They do not seem to be fastened to the framework of the unit itself. It appears replacement elements can be cut easily cut from bulk stock, and if cut slightly oversized, can be inserted securly around the inside edges of the filter frame. Air flow: I could not evaluate this. The flow at the terminal end of the exhaust hose seems very vigorous. My face, when placed in the painting area, can feel the breeze. A 1x2 inch piece of ordinary paper will become stuck to the filter element when tossed into the air from a distance as far away as 8 inches forward of the back wall of the painting area. I suspect paint mist/fumes will be cleared from a lot further out, but I am still waiting for pumbing parts to arrive so I can connect my airbrush to my compressor. Overall I was very pleased with this purchase. Added 9/15/2023: I now have my air compressed installed for my Paasche dual-action, siphon-feed airbrush. I operated it at around 25 psi. Experimenting with both paint as well as airbrush cleaner this unit easily sucked all of the paint and chemicals into the exhaust. I did not detect the odor of either. I remain very pleased with this purchase