KRAUS Purita 100% Lead-Free Kitchen Water Filter Faucet in Matte Black, FF-100MB

This is by far the easiest faucet to install that i have ever seen. works great. very pretty and great value for the money

Super easy and looks great! Feels heavy and good quality!

Haven't installed it yet because we have some work to do first but I wanted to get this out because it's important. A 1-star review in 2019 by Frank Gates shows broken cast metal backing tabs as he called them. I was a bit worried about that but ordered anyway and happily it looks like they completely re-designed that mount for the better. It now has stamped out tabs from stainless steel plate. Looks like it should work well. I'll update after installation. We're happy with the looks of it and it seems pretty decent quality

I am impressed with this faucet! It looks way better in person and it feels like a high quality product. My husband installed it 2 months ago and it's been great! Doesn't feel flimsy at all and I was worried about that. The handle is sturdy. It hasn't dripped or leaked. Very satisfied!

I am revising my original review from 1 star to 4 stars. My original review is below. I have been using the Kraus Oletto now for 5 years. I had two initial issues (see below). In warranty, I obtained a new mixer after the faucet failed. I also had some issues with the button that switches between spray and stream. Other than that, however, the faucet is working well after 5 years. The finish remains the same as when it was new. I occasionally have to soak the end of the faucet in vinegar to remove hard water build up, but other than that, it has been maintenance free. I am not giving this 5 stars in light of the initial issues, but it certainly deserves a revised review given it has been working without issue. Original Review: I had high hopes for this faucet but unfortunately the faucet is built terribly. In less than a year, the nozzle stopped working. First the toggle would not work. Then the nozzle would only let a small amount of water out unless you selected just the perfect amount of water. Full open would cause it to malfunction again. I contacted customer service within the warranty period and got no response. Ever. Now the faucet leaks. It has a bad gasket at the spigot/knob I suspect. That’s pretty bad for a faucet I purchased in 2019. Well, I just got my first water bill after noticing the leak. My water bill is triple the normal amount. Also the nozzle itself is cheap plastic compared to the rest of the body. While installation was painless, this thing is not made to last. I wouldn’t even install it in a rental. My Moen faucet they this replaced is going strong for 10 years plus. Never any issues. I’m very disappointed. These other reviews are "initial" reviews and not long term impressions of the product. Short term, I liked it. But if you intend to actually use this product more than a year, look elsewhere.

Love this faucet. We heard anecdotally that the Oletto has a powerful sprayer, and it definitely does. That is the most important thing we were looking for in a commercial style faucet like this. To keep the power at bay, you can turn the water on minimally which provides a more typical flow.

I finally got around to installing this faucet. It’s beautiful. But as most people have mentioned, it’s mostly plastic. The MAJOR problem is the design of the installation. It’s works perfectly for a very heavy duty sink such as cast iron or even counter top installation. But beware if you own an older, builder grade stainless steel sink, this faucet is not for you. It’s heavy. The two tiny 1/2 moon shaped “clamps” only grab onto about 1/4” around the hole of the sink. Your sink will bow and the faucet will lean if the sink is made if thin, builder grade stainless steel. After I installed this faucet on my builder grade sink, the faucet literally leaned at about a 45 degree angle. Enough to put a crease in the stainless steel sink. I’m blaming the faucet only partially because it could have a much better mounting system that would spread the weight more evenly instead of only over two 1/4” sections. Mostly it’s a problem with cheaper quality sinks. And I say this simply because many people out there have basic builder grade sinks that they are trying to jazz-up with a new faucet. It’s a great faucet other than the design of the installation. Due to the faucet weight, they should have made and included a stabilizer plate to go under the sink. Delta makes a universal stabilizer plate but I decided to install a new, higher quality sink. UPDATE 3 MONTHS AFTER INSTALLATION I was really loving this faucet AFTER I installed a new heavyweight stainless steel sink. But the little moon-shaped tabs that hold the entire faucet onto the sink BROKE for no apparent reason other than possible vibration of the disposal. When the new sink and faucet I went ahead and installed a new, high end, super quiet disposal. The disposal purrs it’s so quiet. There is actually no vibration. But the disposer was running when the faucet broke off. Under the sink lies one of the tiny, pot metal moon-shaped tabs, BROKEN off. This is just unacceptable! Seriously do you now how panicked we were! The water running, the disposer running and all of a sudden the faucet falls toward the interior of the sink, squirting water everywhere? I’ll be asking for a refund and buying a faucet with a different installation design. As you can see from my photo, these two tabs are all that hold this heavy faucet to the sink. As much as I liked this faucet I can’t honestly recommend this. It’s just too dangerous if it were to fall off and seriously hurt someone.

Excelente calidad del producto.

Excellent quality with a clever collar/base unit which permits fitting from above. No scrabbling about under the sink.! BUT, and this is a big BUT, the tails are not the size described and they are bonded to the tap so replacing them is not an option. Having assumed they were the US std thread, as UK thread appeared not compatible, I eventually discovered that the female thread on the tails is M14. This is not a std size in UK and it took some weeks to source a female 1/2” to male M14 fitting from contextpneumatics.com based here in uk who now machine this specific fitting to cater for US imports. Trust this helps those struggling with the problem.

I wanted to wait to review this faucet until we had a chance to really use it, so almost a year later I can honestly say this is really a great faucet. New top install method means that for the install of the faucet you do not need to get under the sink and try to secure the faucet with conventional large nut, and also have to have somebody top side holding the faucet in place. You can do the install from the topside. Only have to go under after to hook up the lines, but still not a big deal. Colour/Color The gold is real nice gold colour, not a brass colour which I find a lot of manufactures have as their gold. Wear and Tear After almost a year of use for 2 people it still looks like new, functions like new. The faucet did not loosen on the mounting. The head sprayer still functions perfectly. Price I thought the price wasn’t bad for a faucet in this class. There are more expensive and a lot more cheaper faucets out there, but for us this one was well worth the cost.

Recomendable

Totalmente lo que queria