Holikme 15 Feet Dryer Vent Cleaner Kit, Lint Remover, Extends Up to 15 Feet, Synthetic Brush Head, Use with or Without a Power Drill

This thing worked wonders! Just the little brush alone to clean the lint trap is worth it. It’s easy to use and quite possibly a life saver. Didn’t realize how much lint accumulated in the dryer duct.

I bought this to use to clean-out the axle housing tube that I had modified for a project vehicle...It worked great for that purpose, using a de-greaser spray. The bristles are flexible enough to go through the bearing opening and expand to sweep the inside of the 3-1/4"OD axle tube. I then used one of the extension with paper towels attached to absorb the de-greaser spray and any crud cleaned with the bristle head. This worked great for how I have used it and I am confident that it will work great for the purpose that it was designed for. The parts are very well made with precision threads to connect the extensions and the cleaning head. I would suggest that the head to stored upright or hanging. I had left mine overnight still attached to the drill laying down and the bristles took a deformed "set", but were easily reshaped. I highly recommend this cleaning brush for excellent quality, ease of assembly, and for adaptability for addition tool functions.

First time I used it and it seemed to leave a lot of the lint behind. When I tried to remove it from the duct the joints caught on the pipe where it made the turn into the long duct that I have going to the outside of the apartment. I had ti run the drill and eventually it came past the bend. Had to do this for each section. Plus when using the drill the sections would not come back apart without using a pair of pliers to turn them loose. Worked great for loosening the stuck lint from the pipe which allowed me to pull a pipe snake through with rags taped to the end to get most of the lint out. Will try it a few more times and see how it does. Had used a long one on a pipe with wet lint clogging the enter pipe and it didn't get much out. Had to use the pipe snake and rags to clear that one and it took 3 passes to get it all out. Each pass with a bigger rag ball on the end.

My pvc wall vent tube turns a tight 90 degree elbow from the wall, goes up and out through the roof at about 12 feet, total length. No issues turning corner, and it scrubbed all the way up with ease. I have a few spare rods if one ever cracks in the future. Drill rotation to the right to tighten only per the instructions.

Works great. Cleared the vent hose in a couple of minutes

It's a good kit - has the brushes almost everyone will need. I could not believe how much lint I pulled from my dryer.

Worked fine for what it can do. I have a right angle turn several feet into the exhaust pipe and was unable to round that corner. The internal brush for the dryer lint filter which can also attached to the nylon rods should be fine but I'm unable to test yet as I have a new dryer

Great design. Great Quality. Works as designed and intended.. Well worth the money.

Does the job and easy to use

This product work like a Charm. No hassle works well. It managed 2 - 90’s in my duct and swept all the built up lint clean out. Kept adding extensions as I went without a problem.

It does not come with an adapter to use with a drill… but if you pick one rod (it will deform the end a bit) and use it as the one with the drill you can snug up the chuck on the metal end and it’ll work. Slow speed highly recommended.

Brosse parfaite pour brosser ce qui nécessite une profondeur de brossage.La couleur blanche des éléments ralongeur ne sert à rien, sauf pour bien les repérer sur un sol noir . Peut être ralongé à l’infini si vous achetez un infini nombre de kit …ce qui peut couter chère! Satisfait de la rondeur de l’activation des poils de la brosse autant que de l’odeur des poils ci-joint . Merci brosse magique , parfait pour la congestion des tuyaux de sécheuse , nasale et tout autre conduit nécessitant de la fibre .

Works very well. Met expectations.