AVLT Dual Monitor Arm Desk Mount for 13"–43" Flat/Curved Screens with USB-A Pass-Through, Full Motion Height Adjustable Swivel Tilt Rotation VESA/C-Clamp/Grommet/Cable Management, White

I bought this dual monitor arm desk mount for my wife’s computer to mount two 32” monitors. Unpacking and installation were fairly straight forward. The only two issues I had were: 1). Instructions state that this mount can be installed using a grommet hole in a desk to secure it to the desk. However, most grommet holes in desks (at least in the United States) are 2” holes. The grommet mounting option uses two all-thread bolts screwed into the base, but the outside spacing of the bolts is about 2-1/4” which, of course, is too big for 2” grommet holes. I ended up drilling two smaller holes in the desk, one for each all-thread bolt. On the plus side, this option secures the mount to the desk very securely. 2). There is no guidance in the installation instructions for optimal placement of the arm mount on the desk. I ended up temporarily installing the lower set of arms on the mount base and then experimented moving the base around the desk while swinging the arms to make sure they would clear all computer and other equipment on the desk as well as the walls. This method worked well and final placement clears everything while still giving full articulation of both arms. The unit is very heavy-duty and quality is excellent. Other than the two items mentioned above I am very impressed with this product. After installing this unit on my wife’s desk, and playing with it for a few days, I ordered one for my desk. Because of the two issues above I would give this 4-1/2 stars if I could. But these smaller issues are not enough for me to lower my rating to 4 stars, so 5 stars it is.

I'm so impressed with these arms. They're super strong and sturdy holding up my 27" monitor and 34" ultrawide monitor. Setting up for the most part is pretty simple and easy. One of the best things I like about these arms is the cable management. I had several arms before for my setup at home and work, and the cable covers are usually pretty flimsy and just slide and lock in. I have a lot DP and HDMI cables due to my dual workstation, so these cable covers often end up popping out since its so full. These cable covers are different since they are screwed down tight with a bolt. All my cables fit pretty snug, but there is no bulging and I don't have to worry about the covers popping off ever again. I'd recommend keeping it at a maximum of 4 thicker cables though. However, fair warning that attaching the covers can be a pain so if you have to detach cables often, the screwed in covers can be a problem. If you have a set up like mine that won't really change often, it works well. If you can, I would suggest having 2 people set up the cable management. One to hold down the cover in place and the other to screw it in. I did it myself just fine though. The range of motion is great for my needs, but please note that I tried stacking my monitors and it didn't quite work. I would say it's 1 to 2 inches shy of properly stacking them. Overall, a great looking set of dual monitor arms. The extra ports on the base are a cool feature that do work, but I haven't had much use of it yet. Love that they had a white option to match my set up too. These are a little pricey, but they're really worth it!

I ordered the dual mount arms to clean up my desk set up. There was a missing part when the product arrived, so I contacted the seller and they sent me the part in 2 days from Taiwan direct. Very happy with support, and the arms are very high quality as well. Very smooth articulation and able to support two 27” monitors without any effort or wobbles. I mount Hue play lights on the back of my monitors and can hide the wiring in the arms. Very cool. If you are curious I use an IKEA dining table as my desk, and these arms mount to it no problem. Great finished look. Very happy with this purchase.

I needed a second monitor stand for my set up and a few years back I originally bought one and decided to repurchase from them again since their quality versus what my friends used was a huge difference. Sturdiness and quailty is something that was really important to me since I needed a stand that could hold two 32" curved monitors and I did not have faith in the thin metal/plasticky cheaper options out there. I also want to mention that I had e-mailed customer service about a question and had the nicest (AND MOST PROMPT) customer service experience I've experienced in a very very long time. The old one I had is running about 5 years strong and survived two moves with no problem or issue. The manueverability is also easily adjusted since there are two tension screws (one for the bottom arm and another closer to the back of the monitor) that help you adjust how much slack you want. Will repurchase from them again but I know its not going to be for awhile since the quality is superb and will last.

I have 2 monitors (27” and 24”) that I attached to my Pottery Barn corner desk with the c-clamp. The installation wasn’t that difficult - at first. Then I had to store the cords and wires and the plastic backing on the arms ALMOST burst at the seams trying to hold all of them. My husband and Dad had to step in and help me get the plastic backing on the arms WHILE holding the cords in place. Once the installation was complete it worked perfectly fine. I’ve had it for 2 weeks and no issues to date. Additionally the manufacturer assumed that everyone has a CPU when MOST people use laptops because the plugs for the USB ports are attached to the backend of the device. Now I have to find a way to hide the cords. It’s a great product that is strong and seems like it will last.

Un poco mas caro que productos similares pero si estas dispuesto a gastarte unos cuantos pesos extras vas a obtener un excelente producto y que esteticamente se ve mucho mejor que otras opciones. Yo lo uso con dos monitores LG de 24 pulgadas

Easy to assemble and good quality Missing one of the small plugs to hold the arm and provide some resistance to it. (partially refunded)

Heavy duty was perfect

Not the cheapest but excellent quality

I set up this dual monitor arm to hold my 34-inch and 24-inch screens. The larger monitor is in landscape mode and the smaller one is in portrait. I used the standard 10x10 cm VESA bracket, and the arm is clamped to the edge of my sit-stand desk. Both monitors are held securely, and the build quality feels solid and reliable. Mounting the monitors was simple to do on my own. I adjusted the tension so the arm would stay at its highest position, then pivoted it flat. I then set the desk height to its highest point. This allowed me to attach the monitor while it was parallel to the floor, which made it easy to screw in the VESA plate. The arm gives a good range of motion, which makes it easy to get the monitors in just the right position. Since my desk is quite close to the wall, I added a bit of foam padding to the top arm to stop it from hitting and damaging the wall when I move the monitor. That small addition made a big difference, though I still need to be careful not to push too hard when adjusting the position. It was also simple to adjust the 34-inch screen so that my kids could see it at a comfortable angle, which was great. Overall, this is an excellent dual monitor arm that I’d definitely recommend.