Scottoiler Scorpion Dual Injector - Twin feed applicator for all Chain Oiler systems - SO-5000…

Fits lovely on me deep brace metchamachex swing arm on Bandit 12...

I have been waiting for years for a small device like this to becaome available. I have had my ScottOiler for the full 11 years I have owned my BMW S1000RR and at the time of Purchase, only a single nib transported the ScottOil to the Chain and Chainwheel. It seemed odd at the time because surely the Chain requires equal volume of ScottOil to lubricate properly. However, this device answeres that need. Once fitted correctly (Not for the Feint Hearted) it works perfectly allowing ScottOil to reach the parts that other, "Lagers Can't Reach". A word of caution, the underside of the Swinging Arm needs to be cleaned with White Spirit etc. The two damp pads provided is not sufficient. You get only one chance with the adhesive patch to fix the device beneath the underside of the Swinging Arm. If you miss the first chance, whilst lying on one's back, trying to position it correctly... give up. There's a solution. The BMW S1000RR is not perfectly flat beneath the Swiming Arm and it is wise to gently file away the excess aluminium (Aluminum for New World Americans) and create a perfectly flat surface. Next, use 6 Minute Hardening Araldite (Similar Glues are available) to create a very secure surface from which to hang the Scorpion Dual Device, whilst lying on one's back, trying to position it correctly. You can position the Scorpion Dual Device very precisely by taking great care to hold the device in place for the 6 minutes, until the 6 Minute Araldite has set hard. I have used ScottOiler for 11 years (21,000 miles) on the one chain and one chain wheel; now I have fitted the ScottOiler Scorpion Dual Device, I expect I may be able to get a few more thousand miles.

Does what its expected to do. I added the duel head to lubricate both sides of the sprocket and chain. It was easy to install and setup and is working fine. I would recommend this product. It saves on lubrication with cans of spray, is less messy and will reduce chain and sprocket wear.

In theory - a great idea. In practice - doesn't work. Here's the issue: If oil is supplied under no pressure to both nozzles, there's nothing to force it to run out of both. Therefore, if one side if mounted 1/10mm lower than the other - guess which one the oil drips out of? If one side picks up a little dirt/oil/grease from the chain - guess which side the oil drips out of. You get the idea. Despite repeated tinkering, it still only oils one side of the chain - but I can influence, to some extent, which side. I guess that's a bonus?

Exactly what I was after Good quality product Decent price

This bit of kit does fit the zzr1400, but you need to modify the base as in the photo. It fell off after a week of winter riding. Luckily I didn't loose it. Scottoiler sent me a other replacement pad out, but I didn't use it after seeing how well the first pad lasted. So I cable tied it up on, and not had much of a problem since (apart from it looking shite). So last weekend I did something about it. I drilled 2 x 2.5mm holes into the swinging arm, then used a 3x0.5 mm tap. Secured it with dome headed bolts. Now it is absolutely perfect. Easy to remove for cleaning, and I know that it's going to stay on. As others have mentioned (it is rather fragile) and extremely over priced. But once set up, it works a treat. Update.... I've lost mine over the weekend. I went for a trip to the coast, came back! It was gone 😕

Works well with a non Scotoiler and oils both side of the chain a treat. Had to trim the outlet pipe to fit my chain. But all good.

Decided to splash out on the Scott oiler and it worked well on one side of the chain but not on the other side , so I then tried the scorpion which does both sides. The outside links get well lubricated and the link nearest the wheel gets lubricated but not so well. I am not sure why and I will have to look into it a bit further when it’s not raining. I am really pleased that I bought and fitted it , it is so much better than using lube.

Une installation qui demande souplesse mais s'adapte bien à toutes les motos (CF MOTO 800 MT EXPLORE), fonctionnement parfait

Come da aspettative

Recently changed chains and sprockets and find the lubing a PITA without a centre stand. Fitted a Scottoiler(reviewed positively) and decided to buy the scorpion dual luber to make sure the oil was getting to both sides of the links and inbetween on the rollers. Hoping to get a many more Kms from this chain set

Really the only way to go. Lubing both sides of the chain evenly sounds way better than the alternative. Easy install too!

Świetna sprawa,działa olowi,według mnie nie trzeba wydawać na droższe olejarki,w tej regulujesz ilość kropli i wystarczy. Polecam Benelli trk 502