Loctite Super Glue Ultra Liquid Control, 0.14 fl oz, 1, Bottle

This glue has been terrific for MANY household repairs. (Also consider the same brand with the blue top). Though this may cost more than "Super Glue", I find it to be much easier to use. Remember after use to squeeze the bottle facing up so glue will; clear and won't dry in the tip. When that happens, I take a small nail and a hammer to clear the tip. Good stuff...a million uses and it has never failed me. I always keep a spare bottle around.

I used this to assemble some prototype fuel injector filters at work. I had rapid prototype high precision stereo lithography frames and laser cut nylon mesh panels. The frames had 0.25 mm wide slots and the laser cut mesh slid down into those slots. I was able to very accurately apply the glue to the tops of the slots and it wicked in and glued the mesh in place perfectly. These are tiny little fragile parts, I worked under an high power magnifier and used a dental pick to position the mesh. The dispenser worked perfectly, allowing me to control the drop size. I did the assembly of 10 filters over the course of several days as each one took about half an hour. The dispenser never clogged. No glued filters.

As a scale model builder, I love using a CyanoAcrylate/super glue for precise gluing or when extra strength adhesion is necessary. This is a great supplement, or replacement to liquid cement. Generally I use " Non-Toxic Cement w/Applicator, 1oz " though this super glue has rapidly become my main go-to glue. It dries extremely quickly. So if you have a small piece that you need to manually hold in place, you can put down a drop of glue, wait a few seconds and then put your piece down. You may not need to hold it there for more than a few seconds as the glue rapidly turns into a thick gel before hardening. While most super glues dry quickly by nature, the most important feature of this glue to me is that it has a very clean applicator design. When you squeeze the red plastic ribbed sides of the bottle you can very precisely dispense from 1/2 a small drop to LOTS of glue. I suggest you test the dispense rate before you try gluing so that you don't flood it. You really don't need much pressure at all! While the product is "4 grams" and has lasted me several model builds, it still only contains .14 oz of glue. That said, I will gladly be replacing it with another once I do run out. You just can't beat it's clean applicator. I previously used " 1/2oz. Zap-a-gap Ca+ Green By Zap a Gap " for my model builds. Although Zap-a-gap works great, after several models the applicator became unusable due to glue build-up.

Really good glue but I think it is too expensive

A great glue. reason for 4 star rating on use--my hands are weak so I use a plier to squeeze the glue out. after use, when capped closed, the glue inside container does not dry up as I’ve had with other products. Value--I use it a lot and I haven’t found much bigger sizes of this product. once container is opened, the glue comes out quickly. best of all, it works, it really does!

I originally bought the two-part glue and that was a nightmare. I then tried this. Both were made by Loctite. But this dispenser worked perfectly for me. Very easy to use. No mess. And the best part is that when I went back a couple of weeks later to glue something else, it was easily dispensable once again. It wasn't crusted over from the previous use. It was as if it were a brand-new bottle again. This is definitely my go-to glue for all my expensive stuff that needs gluing from now on.

My go-to glue is Loctite Gel Control which is truly incredible stuff I’ve gotten up to 100 uses of a single bottle(!). But this is my favorite LIQUID super glue. (I mainly use Gel because it gives you time to position the parts, and it’s sticky but not instant, so easy to use.) This stuff is for when I need that liquid capillary action, wicking into tight cracks etc., or I need something to glue as fast as possible. This glue will lock into position within 5-20 seconds. After 30 seconds you are definitely not going to be able to move the part anymore. Note: If you’re gluing a dry, porous surface like ceramic, this will set INSTANTLY, so make sure you align it perfectly the first time!

So far it's worked well on everything I needed it for. It dries fast, and the bottle makes application easy. You do have to use a light touch when you squeeze it, or too much might spill out. The bottle is great compared to the tubes that I used to buy. The tubes would usually clog up and dry out if they sat too long. This bottle closes up tight and when you're ready to use it again there are no clogs or problems. Works just like when you first opened it. At least that's been the case for me so far. Good stuff.

Best product

Third purchase over a few years as the dispenser is really good and the lid doesn’t stick so it’s useable over a long time once opened.

These are my favourite superglue as they don't set up after use and just be sealed and used again. Nice size for a few small applications/jobs. Creates a really stong bond as you would expect.

جدا سيء وصلني المنتج مستخدم و داخل العبوة نوع الصمغ مختلف عن الاصلي

Excellent product and excellent value.