DIY Pc Test Bench, Open Chassis Case Rack for ATX/M-ATX/ITX Motherboards,Widely Body Heat Dissipation Design Open Air Pc Case, SSD Motherboards Accessories

Why did you pick this product vs others?:It is very sturdy, once screwed together. I just wish they etched the Micro ATX and Mini-ITX near the holes for standoffs but I just put the motherboard over it and figured out which standoffs I needed. But this works great to test hardware fast.

Incredible value, and works great with very quick setup.It will lack structural rigidity until there are both a PSU and at least one PCIe accessory installed.But otherwise, it looks great- very minimalist, so the mobo, CPU cooler, and GPU are the main attraction- as they should be on a test bench!Airflow is open, so do not expect high air refresh rates, as there is no forced induction/ventilation.That said, even if you are overclocking, this should be fine. Just be sure to ramp up fan speeds as needed, or switch to a water loop.That said- THERE IS NO SPACE ON THIS CASE FOR A H2O PUMP or RESERVOIR- so think carefully about your needs before using this case on a water build, and perhaps mount both the case and those accessories on a unifying board (either something fancy, or just a piece of plywood).But if air cooling suits you, this is a great size for displaying on a standing desk & having easy access to swap out parts for rapid testing & improvement!

Is this the end-all of end-alls? No, but for the price and the abilities, you can’t ask for much more. It’s sturdy enough, good enough, and nice enough. My only slight complaint is that the “gap” between the rear wall and the motherboard, where the card “legs” stick down into is just barely enough. So when placing a graphics card I often have to slightly pull on the wall or motherboard to get that gap to slide in the legs fully. Hopefully this helps. It’s a good deal for what it is. IMHO

I used the ALAMENGDA AL02 DIY Gaming Computer Open Air Case for my home arcade build, and it has been a great choice.What I love:Sturdy Construction: The frame is solid, providing a strong foundation for my components. Even with all the hardware and wiring, it feels incredibly stable.Easy Assembly: All the parts fit together perfectly with no issues. The design is straightforward, and I didn’t have any trouble putting it together.Great Functionality.Great for Custom Builds: The open-air case is ideal for a custom arcade setup, giving me plenty of space for components while keeping everything easily accessible.Clean Look: The sleek, open-air design not only looks cool but also helps with airflow, keeping everything running smoothly during extended gaming sessions.If you're building a custom arcade or gaming PC, I highly recommend this case. It's sturdy, fits together well, and provides an excellent platform for your components.

Amazing for a test bench, makes swapping and testing parts very easy. Solid metal, won't bend when i go to pick it up and move it, compact for its size and cost, it honestly works like a dream. However, building it was a tad bit confusing as you could guess, a tiny 3"x5" paper in chinese showing you how to build it is not the best.

It's incredible you can get a decent open air test bench for under 20 bucks these days.This thing is pretty great for the current price ($$18.99 USD), albeit a couple of shortcomings. The metal is relatively thick, doesn't wobble or bend, and when everything is put together it's pretty solid.My only two complaints and/or recommendations to the manufacturer are:1) include some type of non-metal feet or base, even if it increases the cost a couple of bucks. I just cut some 1.5 trim boards, but you get the idea2) several of the screw and standoff mounting holes do not thread easily, severely increasing the risk of stripping if one is not carefulIf you buy this, be gentle when screwing in the standoffs and screws, about a quarter of a turn at a time and then back out, rinse and repeat until seated. This will help ensure they do not strip.Other than that, 30 minutes + a little wood/hardware and you have a weighty, solid and practical open air test bench.I simply used a few dabs of super glue to get the wood base boards to temporarily adhere, drilled some 1mm pilot holes where there are open holes in the base plate and use some small screws to lock them in place.Before mod = 3 starsAfter mod = 4 stars

This is a great teaching aid. It allows students to assemble a working computer easily and without a cumbersome pc case. The frame assembly instructions could be better and the illustrations are too small. The frame is sturdy and should be useful for many years to come.

Sturdy enough and has everything you need. Wasn't expecting the power button and the extra case screws but they have made putting everything together very easy. Instructions confused me for a second, but everything fit together well. Nice to be able to test parts easily.