Spigen GlasTR EZ FIT Screen Protector for iPhone X/XS/11 Pro (5.8)

TBH, I cannot attest to the durability nor actual effectiveness of this Spigen AluminaCore Tempered Glass Screen Protector (and hope to never have to inadvertently find out LOL), but I must say that the installation process is quite easy and the results are “spectacular” (to quote a famous line from an old Seinfeld episode LOL). Seriously, these were the easiest screen protectors I have ever placed and the fit and finish on my iPhone 17 (standard base model) was great. The installation process is clearly outlined in the provided instruction sheet, although the best method is following the video instructions which are accessed via the QR code provided. The kit comes complete with a great cleaning kit which also includes a very useful dust removal “tacking” sheet. Two complete screen protectors are included in the kit (they come pre-attached and aligned on two alignment frames). This may be a good thing for some as it does take a little effort to get a perfect result without any bubbles whatsoever. A nice squeegee tool is provided which makes it very easy to remove any air bubbles. It is a little more difficult if you happen to get a little dust particle caught under the protector but there are video instructions on how to deal with this as well using the dust removal stickers. Being a tempered glass screen protector, this is a little thicker than the old style polymer film protectors. However, once you get a hang of it, the ability to get it to seat with absolutely no bubbles whatsoever, and the precision of alignment made possible with the alignment frame, makes this by far the best screen protectors I have ever installed. There was no reduction that I noticed in the touch sensitivity of the screen and the smoothness of the screen protector and smoothness of operation such as with swiping etc was excellent. The glare from the screen protector is the same as the unprotected screen as it has a smooth glass surface so it did not add any anti-glare properties. The fit goes right up to the edge of the iPhone 17 frame and placement is easy to do with the alignment frame. This is the first screen protector that I was actually able to install where up close it was very difficult to discern that I actually had a screen protector in place (meaning absolutely no bubbles, dust, with absolute clarity). As a matter of fact, when a friend of mine noticed a had a new phone, he mentioned that I should get a screen protector for it, not noticing that I had already installed this one! I cannot address the durability as of yet but should I ever need it, the kit comes with two complete sets so I am covered! I think this was reasonably priced for the quality and general ease of installation and would not hesitate to purchase again.

This screen protector was incredibly easy to install thanks to the included installation tools. The alignment was straightforward, and I had no issues getting it on perfectly the first time. Best of all, there were no bubbles after installation, and the screen remains smooth and responsive to touch. It looks great and doesn't interfere with the display quality. Overall, I'm very happy with this purchase and would definitely recommend it.

After using my iPhone 17 Pro case-free and protector-free for a couple of weeks, I finally installed the Spigen AluminaCore Glas.tR EZ Fit today once it arrived—and it exceeded every expectation. This is easily one of the highest-quality tempered glass protectors I’ve ever applied. Installation: Surprisingly Easy and Extremely Precise My iPhone 17 Pro didn’t lay completely flat in the tray because of the raised camera plateau (it laid in a slanted position), but that did not interfere with installation at all. The top tray still aligned perfectly once pressed down. I followed the included QR-coded video instructions step-by-step. Here’s what helped: • Cleaned the screen first with my own microfiber cloth + alcohol, then again with Spigen’s wipe. • Used the dust-removal sticker exactly as shown in the video. • Peeled the protective film from inside the top tray before lowering it onto the phone. • Pressed the tray down for the recommended 30 seconds. • Removed the tray, then peeled off the outer protective film, then worked out the tiny bubbles with the included tool. The bubble-removal step took patience. The tool doesn’t glide until you remove the top protective film—after that, the bubbles push out cleanly. Total install time: about 5–10 minutes, with a perfect result. (For anyone wondering: the second protector is simply a backup. I secured it with a rubber band and stored the unused one back in the box and for future use.) Fit & Feel: Absolutely Seamless Once applied, this protector looks and feels like part of the phone itself: • Perfect edge-to-edge alignment • Glossy, crystal-clear finish with no haze • Touch response identical to the naked display • Smooth, premium swipe feel—honestly smoother than the bare iPhone glass • Lightweight—adds zero noticeable weight • Works flawlessly with my case (no lifting, no contact at the edges) The glass feels strong, rigid, and high-grade, exactly what I’d expect from something labeled “AluminaCore.” It maintains the iPhone 17 Pro’s crisp sharpness and brightness with no distortion. My Final Verdict: If you want a protector that genuinely disappears on your screen while giving you real-glass smoothness and serious durability, this is it. Spigen nailed both the engineering and the user experience. Highly recommended—especially for anyone installing a protector on a curved-edge iPhone 17/17 Pro and wants a flawless, frustration-free result.

⭐⭐⭐⭐⭐ I couldn’t be happier with this screen protector or with Spigen’s customer service. The EZ Fit installation system made it incredibly easy to install, and once it was on my iPhone 14 Pro Max, I honestly couldn’t tell there was a screen protector on it. The glass feels exactly like the original iPhone screen. It is smooth, crystal clear, and doesn’t change the colors, resolution, brightness, or touch sensitivity in any way. I’ve used other glass screen protectors over the years, and they always felt like there was an extra layer on the phone. This one doesn’t. It truly feels like you’re touching the original iPhone glass. I had a question after one of my installations, so I reached out to Spigen’s customer support by email. I was amazed when they responded in about 30 minutes. They took care of everything quickly, made the process incredibly easy, and had a replacement on its way within a couple of emails. Customer service like that is hard to find these days. Between the quality of the product and the outstanding customer support, I couldn’t be more impressed. Spigen has earned a customer for life. I will definitely continue buying their products and recommending them to family and friends.

Overall, I’m quite pleased. The fit is perfect and no conflicts with a Spigen Tough Armor case. The alignment tray worked flawlessly to get it perfectly aligned which is good because the gap between the screen protector and the lip of my case is about the width of my pinky’s fingernail. My only gripe, and the reason I docked a star, was the installation video showed that you load a pull tab onto the adhesive backing of the glass protector and once the tray is in place you pull on it to remove the adhesive backing and expose the adhesive to come into contact with the screen while holding the tray in place. The one I received had no such contraption. You have to remove the adhesive backing first with the adhesive facing downward, then very carefully align the tray on the phone until the adhesive comes into contact with the screen. I still got a perfect installation with no air bubbles, so I can still recommend, but the confusion about the installation video was annoying.

I am very happy with the performance of these screen protectors. I wasn't all that thrilled with the inexpensive kit I was using before, a very popular item from JETech found here: https://amzn.to/3SN1x0s I found that those screen protectors offered zero fingerprint resistance and worse yet, they would eventually show a dot matrix which obscured the screen. It also seemed like the touch-points were off...maybe it's just fat fingers. These protecters solve all those issues. Nice fingerprint repelling coating, no visible dot matrix, accurate touch points. The install was fairly straightforward, though this is likely the most copious waste I've seen from a phone screen install. The guide is thrown out with each use. While it is technically recyclable, I know most centers send plastic like this to the landfill. So from a waste perspective this is not so hot. That aside, these are the best quality screens I've used in a while. If you just want cheap bulk because you crack your protectors all the time, the above item works well. If you want something premium for your premium phone, this is the one (from what I've tried).

I’ve used these Spigen iPhone protectors for years. They are very effective-when I trade in my phones, they look brand new. The installation is pretty easy because of the clear instructions and simple steps.

This makes for a very easy review. Ever since we started putting screen covers on our mobile/cell phones a little over a decade ago, the procedure has been a nightmare. Most of us live in a dusty, dirty urban or dusty rural environment which gives rise to dust and/and or dirt particles in the air—even inside our homes, apartments, condos or town homes. There’s simply no getting around it. So, putting a glass screen protector on an iPhone or similar is practically impossible without issue. Our hands shake and other things we can’t control occur causing the placement of the protector to go onto the phone’s screen off-kilter. In my experience, I have never yet been completely successful in placing a glass screen protector on a phone’s screen EXACTLY as it was meant to be. UNTIL NOW! Spigen has finally come up with the answer. Since my last phone was the iPhone 7+ which was purchased over two years ago, this method used by Spigen might not be brand new, but it’s new to ME and could be new to you. AND IT’S FANTASTIC. Before starting the installation process make sure you have removed the somewhat hard to remove heat-dried thin plastic lining that Spigen lines the outside and inside of the Ultra Hybrid Case (assuming you are using one of the Spigen cases to go along with the Spigen Tempered Glass Screen Protector. Failure to do so will cause you to use the second screen protector provided in the box by Spigen). Following their instructions, this NEARLY eliminates all possibility for error. As always, they provide all the tools necessary for installation; and to that end, Spigen has added an installation tray to ease the pain. Once you have used the wet cloth for cleaning the screen and phone if you desire to, I recommend laying the cleaned phone on a flour-bag kitchen towel because of the lack of lint. Then I use their provided soft microfiber cloth to wipe down any streaks left by the wet cloth and any remaining fingerprints or other debris left that have settled onto the phone’s screen at no fault of your own. After all that is done, I blow my phone’s screen off with non-moist canned air as an added precaution (air not provided). Then you should use any of the four (4) stickers provided to lift off any still-invisible particles before the final stage. Next, peel the cover off the plastic installation kit and place the phone screen-down into the installation case/kit. Turn it over and place the phone now inside the kit on something lint free such as the aforementioned flour-sack towel. The instructions to all these steps are on a small piece of paper in animation form without words. On this now-obverse side face-up, written instructions tell you to push your finger from the top to the bottom of the slit that is carved out of this side of the plastic kit—this helps press the glass screen protector to the phone’s screen. After 30 seconds, remove the tape that covers the slot, and lift this case away from the phone. With the phone face-up, immediately take the non-handled squeegee and from the center of the screen rub toward the outer edges of the screen until the bubbles are completely removed. If after doing this, one or more bubbles seem to linger with a dot in the middle, this is caused by a tiny speck of dust or dirt that landed on the phone’s screen even after you cleaned off the screen. As I said, it’s virtually impossible to live in a completely clean environment. Although it has been the suggestion by manufacturers to lift up the screen only as far as necessary to attempt to remove the small speck, and then lay down the cover again, and use the squeegeee to stick the glass protector back onto the screen to rub out the bubble, I strongly don’t recommend it because I have found that once removed, it never sticks to the screen as well the second time as it did the first time. It’s best to leave well enough alone or to purchase another Spigen Screen Protector and try again. Remember, there are two complete sets in each box. So with each attempt, you always have two tries before being forced to purchase another. This particular glass protector does not lessen any feel of touch by finger or stylus away were it not placed on the screen one iota. Highly recommended for it’s quality and lack of loss or feel of touch, and especially for it’s ease—finally—of installation. Whether or not you purchase a Spigen Case for your Mobile Phone, all smartphones need protecting by a Tempered Glass Screen Protector and with Spigen’s latest case and provided tools to use to install these screen protectors, Spigen has risen above the masses of manufacturers by taking the guesswork of how to place the screensaver onto the screen as well as making it the most foolproof installation—ever!

جودة ممتازة وحماية قوية

Can't be easier to install and great quality too. Just get one.

Easy to assemble and so far good quality:)

今まで色々なものにチャレンジしてきましたが、コレが一番簡単、しかもピッタリと装着できました。次回もコレにします。

Se coloca muy fácil y sin burbujas.