Henzxi Universal Car Power Door Lock Actuator 12V Motor (4 Actuactors + Keyless Entry)

Installed on my 2 door Ranger, works great. Install is not too difficult if you know what you're doing. Definitely not a project for amateurs as the instructions are very minimal, basically just showing the wire diagrams and not how to install as every car is going to be very different. Wires are a bit short so I had to splice in some extra. All in all I'm happy with the kit for the price. Only beef is the box was damaged and screws were loose in the box.

This kit works great in my 1989 Jeep Cherokee sport. I had to drill a couple of holes in the inner door supports, and thankfully a couple of factory holes worked for mounting the one in the tailgate (it's fiberglass). The only thing I wish for was a way to switch polarity of the locking mechanisms. Right now they are reversed because of the way I had to mount them (lock button is unlock, unlock button is locked), but otherwise it works very well.

pretty easy to install. wish it let me configure the side that would lock or unlock. but was able to make it work by bending the rods in place. overall pretty happy with it. definitely recommend it . the remotes range is crazy. worked 2 blocks away .

The wires are short you have to splice in 10 feet of wire to make it work. The actuators were different front and rear. The front worked fine but the back was different. The back I had to cross the wires - blue to green to get all locking at the same time and unlocking.

I used it as a replacement door opener on my 1933 Ford street rod. I was in a hurry to get the car back together so I ordered from Amazon Prime mistakingly thinking I would get it before my regular jobber could get it to me. WRONG, but it came a little late and worked fine.

I installed this keyless entry into my car and it worked for about 20 minutes. I have extensive knowledge about 12v wiring and this was a breeze to install. Everything on the instructions is loosely translated into English. After deciphering these wires, the module simply would not work anymore. Both trigger wires for the unlock/lock signal respectively must have fused internally on the circuit board, both reading as a Ground signal. No response from the module after this. Simply would not work. Poor quality. If you're looking for a cheap keyless entry that works fairly well, I bought a "X AutohauX" product on Amazon as well that hasn't let me down yet.

It works great I installed on a Chevy wt with manual door locks I’m a mechanic so I would advice a person to have a mechanic to install. Takes about 2 -3 hours to install

this kit is pretty good. gonna want to buy extras. they break about every two years or so. the fob has some amazing range. ive gotten it to pick up from 100Yds away. again really good if you have extra parts