- PLA+3D Printer Filament 1.75mm Bundle, Individually Vacuum Packed, Multicolor Dimensional Accuracy +/- 0.02mm, 0.25kg per Spool, 16 Pack, 4kg Total

Colors are shiny for a basic pla but I really like the effects. Alap print on general pla on bambu with no hiccups

Overall, a great bundle of PLA filament rolls (Note, these are 250g rolls). I have printed with a few of them with good quality results from my Flashforge AD5X. One thing to note is that some of the colors seem to be light on pigment resulting in a somewhat translucent effect. the bungle is a bit costly per kg but does give you a good choice of colors(which is why I gave it 4 stars). Also includes 1 roll of clear PETG filament, which also printed well after drying.

Great variety of colors to get started on creating fun, new prints. I've been using them for multiple multi-colored projects. Now I just need to figure out what else to create.

⭐⭐⭐⭐⭐ I picked up this PLA+ 3D printer filament bundle mainly for multi-color printing and small test projects, and it has been a great value overall. Each spool comes individually vacuum packed, which is a big plus for keeping the filament dry and ready to use. The packaging quality is solid, and everything arrived in good condition without tangles or moisture issues. Print quality has been very consistent across all colors. The filament feeds smoothly, and the dimensional accuracy of +/- 0.02mm seems accurate based on consistent extrusion and clean layer lines. The smaller 0.25kg spools are perfect for testing colors or doing smaller prints without committing to full-size spools. The variety of colors in the 16-pack makes it easy to experiment with different designs and multi-color projects. PLA+ strength and adhesion are also good. Prints feel slightly stronger than standard PLA, with good layer bonding and minimal stringing when properly tuned. Overall, this is a very convenient and cost-effective filament bundle. If you want a wide range of colors for prototyping, small prints, or creative projects, this set is definitely worth it.

For the most part this filament is ok. Its cheap so if you are just getting into 3d printing this is good to learn and work out the kinks with so youre not wasting a ton of money of expensive filaments. A bit of inconsistency between the colors so some stick to the build plate better than others.

I recently picked up this 16-pack PLA+ bundle, and it has been a fantastic addition to my workshop. With 4kg of total filament across 16 different colors, it provides an incredible amount of versatility, especially for projects that require multiple colors or quick prototypes. Performance and Print Quality The filament itself prints very consistently. I have found the dimensional accuracy to be reliable, with clean extrusions and no clogs. The colors in this bundle are vibrant and match the photos well, making it easy to plan out multi-color prints. Each spool is individually vacuum-sealed with desiccant, which is a major plus for maintaining quality over time. Compatibility Note It is important to note that because these are 0.25kg spools, the diameter is smaller than standard 1kg spools. As a result, they do not fit natively in the Bambu Lab AMS. However, this should be common knowledge for anyone using an AMS with smaller rolls; if you are an AMS user, you will either need to print a spool adapter or use a different feeding method. Final Thoughts Even with the spool size limitation, the value here is hard to beat. Having a wide range of colors on hand without committing to full 1kg rolls of each is perfect for makers who do a lot of small-scale designs or decorative prints. If you have a way to manage the smaller spool size, this is a high-quality, convenient set that I highly recommend.

NOTE: These are significantly smaller spool than the 1kg standard so make sure your printer can support it. I had to re-spool these on to 1kg spools as they don't really work in Bambu AMS. During the re-spool process i was able to take note of the really good windings on the spool and the constancy of the diameter the whole time.. If there were issues, it was undetectable. TL/DR: Overall - i think this is comparable in performance to any other budged brand out there but the "Value" is a little less than I'd like - Cost is around $22 per 1kg spool (based on this bundle) - there is a lot of competition at that price and those brands have name recognition.. I have "go to" brands that are $16 that work just as well so unfortunately, this brand won't end up in my inventory. But, should this go on sale or if individual 1kg spools are sub $20 - This would be a strong and safe recommendation. First i ran a Temp Tower and a Speed Test and found the results to be on par with other brands PLA but i just made a custom PLA profile for this to give it a fair shot, using recommended settings. I used this filament to print a bunch of 3D prints on a Bambu P1S and X1C and didn't have to really do any adjustments to the print. Honestly, it prints just as good as any filament i normally use. I cannot tell which print was made with this, or any other brand i use. Print quality and adhesion was equal, strength and flexibility was on par. The first issue i had was with the vacuum sealing, 2 spools had a noticeable loss of vacuum and 2 spool was almost completely vacuum free, the rest were acceptable. Since i wanted a fair comparison i did fully dry the spools before printing.. We all know wet filament prints badly. On a "funny" note: The transparent PLA was not sticking to the bed well, had adhesion issues and left gaps when printing a vase in vase mode and overall, i was not happy with the print - As i was writing the review i revisited the listing to get the price for a "Value for the money" opinion and then noticed that the ad stated the CLEAR Filament Was PETG - NOT PLA --- Oops.. Since i had to respool this filament onto 1kg spools i did not notice that it was PETG so the print profile and temperatures were all wrong - No time to retest before this review but, i will update when i do -

I normally buy larger spools, but recently bought a mini printer that can't handle the weight. I was pleased to see the Kalidora PLA+ in the 250g spools at a very decent price. The filament arrived in individual vacuum sealed bags with desiccant packets. The seal was good and tight around the spools. I normally would keep them sealed until use, but really wanted a look at the colors. I was very pleased with the brightness of the colors and a full rainbow of color options to include a transparent and silk gold. I weighed the filaments on spool and averaged 320g, which is reasonable when adding the spool weight. The filament itself was tightly wound around the spool, but released easily during printing. The average diameter was 1.76mm when measuring the start and tail of the filaments. The overall look was fairly uniform. During printing, set at generic PLA, I had good extrusion and flow. There was good adhesion to the plate. The colors came out rich and consistent. As I stated earlier, I bought this for a TOYBOX printer, but I had no issue with it in both my A1 and K3 printers. All three printed well with the filament. As for the cost, for a good 16 color option, the cost was reasonable. I usually see the 10 color bundles at this price point. Would highly recommend the bundle.