Tool Daily Pressure Washer Adapter Set, M22 15mm to 3/8" Quick Connect Kit

I have an AR Blue 390ss that uses the somewhat strange 22x15 threads versus the more standard 22x14. I recently purchased a pistol grip for use with it which came with the adapter to accept the pressure hose from the AR unit but that required unscrewing the wand and screwing on the pistol grip so I wanted quick connects. These were inexpensive, well made, didn't leak a single drop and I realize that the 3/8 male quick connect side is actually a universal fit and so I can use my devices with my other pressure washer which is a Karcher. I can also quick change during a project (after depressurizing the hose first!) between the wand and the pistol grip. I do have a couple of suggestions to those that are getting leaks with these. Do not use teflon tape, there is no need for these type fittings, they make use of an o-ring to seal. Secondly, and more important, lubricate the fitting before screwing these on. Use a water soluble lubricant (astro glide works great but your buddies will wonder why it's in your tool box but let them use their imaginations) to coat the inside of the brass fitting. This prevents the o-ring from tearing, the number one reason these things leak. It will also make disassembly at some point in the future much, much easier. The water soluble lubricant won't damage anything inside the pump itself but you don't need a lot of it - half the size of a pencil eraser is plenty. It also lets you push the male side far enough into the female side for the threads to bite - very important because it will resist due to the tight fit (this is starting to sound like a cheesy romance novel!). Oh, and if you buy this set by mistake and insert your 22x14 hose into it, it will go together just fine, the external threads will match up just fine but it will leak like a sieve because the o-ring isn't making contact properly. Lots of people have done this, unaware that there is this strange difference in sizes that to the naked eye, look exactly the same.

Good fit, works as expected.

I purchased this combination washer adapter kit specifically for the M22 15mm to 3/8 Quick Connection. The item was the answer to a connection I so desperately needed to make.

Product works as intended. Well built. Had a problem with leaking and finally figured it out after several on again/off again installs - the 15mm plug (the side with the black grip) is threaded into the rest of the part with a metric hex wrench (Allen wrench). There is an o-ring at the base of the threaded part that you can't see that helps create a tight seal/fit. On this one (I bought two) the o-ring was wedged between the two pieces and sliced. Put on a new o-ring (size is very important), screwed pieces back together and voila - fixed no leaks.

Works fine m22 x 15mm

Had a SunJoe pressure washer and wanted to quickly be able to swap spray guns for different applications. This fit perfectly on both the pressure washer hose and the gun itself; no leaks or issues thus far. Perfect!

I purchased two option #2's and had hoped to connect them to my SunJoe SPX3000. Unfortunately the quick disconnect piece would not connect to my SunJoe hose. I contacted Amazon customer care and they promptly sent me a replacement. Unfortunately it didn't work as well. Amazon customer care wanted me to try another replacement but at this point I didn't have much faith that it would be any different. I also decided to send an email to Tool Daily to see what may be going wrong since other purchasers of this product did not have any problems. Long story short - Tool Daily customer care folks are great. We are still in the process of determining what is the issue but they have bent backwards to try to take care of me. I have told them that regardless of how this issue turns out, I will be giving them a 5 star rating. And its because of their customer care team. Be aware that even through their product didn't work, it wasn't because it was poorly made. My current guess is that I was sent the wrong part - possibly (still working on it). So as you can see I would recommend this company and its product whole heartedly.

ease of removal

The internal 15mm Swivel does not fit into a Ryobi pressure washer hose connection....although it should. Also, unlike other quick connect kits, it doesn't snap together in a "quick connect" fashion - you have to pull it down, push in the nozzle in, and then force the ring back up to make the connection work. Disappointing.

Next day delivery and works perfectly. For the price and performance could not fault the product

Come da descrizione

I am very satisfied with the product, does not flow and no leak to the connectors, fits very well for the connection with the pressure washer Simoniz, I had a fear of this product, since Simoniz has their product that costs very expensive, I will finally disconnect the hose easily, thank you Tool Daily, 5 STARS

Adapter Set mit gutem Qualität.Danke!