HD 1080P 5 inch Wireless Backup Camera for Truck: 15-Min Easy Install Clear Night Vision Digital Signal Stable No-Delay Bluetooth Rear View Camera for Car Pickup SUV Camper Parking Safety Assistance

I had to return a backup camera system from another seller because the license plate camera was barely attached to the bracket by a very tiny screw. I then bought this Leekooluu wireless system and was very happy with it. The license plate camera is securely attached to the bracket, the second camera is also very well built, the 7” monitor is clear and crisp. They even provide extra wires and connectors for you to test the system before permanently installing. This Leekooluu backup camera system is one of the few on the market that can also record 1080p videos when you drive to be used in case of accident. You will need to provide a SD card, 128gb or less, and the videos can be automatically recorded and played back clearly on the monitor or on computer. After successfully testing, installing is straight forward, connect the 2 cameras to 12v power then plug the monitor to a cigarette lighter receptacle, turn it on, and voila you have the videos wirelessly displayed on the monitor, clean and clear. Both cameras are pre-paired at the factory, this saves a lot of time and hassle. It took me about 30 minutes to run wires, secure the cameras, the rest is easy. So far, the system works flawlessly for me when backing up. I also have many videos to keep when driving through beautiful areas and proof in case of an accident. I believe this is one of the best backup camera systems out there, both in quality and price. I strongly recommend it to anyone who needs a backup camera or a dashcam or both.

This camera was very easy to install, inside and out. It works good, very clear.

Hello, I installed this wireless backup camera on my Ram 1500 truck and I am very happy with its performance and ease of installation. I needed a solution for coupling my truck to my travel trailer because of difficulty in seeing the hitch to tongue connection with the trucks backup camera which was too far away to be of help. I opened up the box with the parts and found that everything was included in the kit including the Display,License plate camera, suction cup mounting unit, and 12 volt power cord, along with the necessary wiring, connectors and instruction manual. First, I installed the suction cup mount securely to the display. The suction cup mount has a tightening knob to cinch down firmly. and attached the display to the console of my truck. From there it is simple to reach the power take-off to plug in the power cord for the power supply which includes an on-off button for convenience. Second, I went to the rear of my truck to see where I could find the 12 volt power feed on my truck to power the camera. You can use power from the reverse light, tail lights, or license lights. I count that the rear wiring on my Ram was coated with a rubberized material that made it very difficult to select and/or tap into an appropriate 12 volt feed. The solution on my truck was to use the flat 5 wire trailer hitch plug that was conveniently right next to my camera. I used a trailer plug cut to a short length and connected my camera’s power cable to the White/Ground and the Brown/Running lights. I had an immediate and simple solution to getting power to the rear camera. Pros: The nice 7” display was very clear with great resolution and the rear camera gave me the close-up view I wanted for lining up the hitch with the trailer coupler The signal from the rear camera was very stable with no issues and the camera came pre-paired to the base unit display Installation is a simple matter. Once a 12 volt source Is determined simply connect the positive and negative wire from the camera Easy to access panel button set up menu to access all screen settings, play, and record The base unit/display can accept up to 4-cameras and there is a choice of a single display or multiple camera display. The base unit comes with an SD card for recording purposes should you need that function Camera has visibility in low lighting conditions and at night Importantly, I can switch the display to my other truck by disconnecting the display from my Ram, and ordering another rear camera for my Tahoe Cons: I have no complaints to report as this is exactly what I needed to assist with my travel trailer hookup. Suggestions: Your truck may have a trailer plug in close to your license plate as my Ram has. Using that solution saved me a bit of time trying to find an appropriate power source. Also, I may invest in an optional front camera so that I can record front facing events.

I am currently using this on a 1999 Jeep Wrangler. I found it very easy to install, but I am very comfortable with soldering and connecting it to existing electrical systems. This is not necessary as you can power it from a cigarette lighter. I actually use it all the time, kind of like a rearview mirror instead of just when I have the Jeep in reverse. It works very well, you just have to remember there is no audible alarm to let you know if you are too close to an object. It works extremely well in low light conditions when reversing in the dark! The only thing that prevents a 5 star rating for this is because it will occasionally (< 1% of the time) lose signal or "freeze" the picture on the feed.

I bought this backup camera for my older car that didn’t come with one, and I’m seriously impressed. The installation was easier than expected — the instructions were clear, and all the parts were included. It took me about an hour to get everything wired up, and it powered on without a hitch. The picture quality is surprisingly good, even at night. The wide-angle lens gives me a full view of what’s behind, and the built-in guidelines make parking a breeze. I feel much safer now when reversing, especially in tight spaces or crowded lots. The screen is bright and responsive, and there’s almost no lag between movement and what you see. For the price, this device has exceeded my expectations in both quality and performance. If you’re looking to upgrade your car with a reliable backup cam, this one’s a great choice.

Product works great. I get a better view in backing than I do with my brand new Nissan Truck with its back up camera. I did not install it myself, but had it installed by an Auto Shop. He said that the installation was very easy and did not take long at all. I told my neighbor about it and he is thinking of getting one for his daughter that just started driving.

There were certain aspects of the installation that I struggled with, but I’m not mechanically inclined in the slightest. The monitor is simple, plug it into the cigarette/power port, stick the adhesive pad on and stick it to the dash somewhere of your choosing. It does come with hardware if you decide to mount it somewhere that requires it being suspended upside down or something. The wireless ability is amazing, it makes connecting the camera(s) to the monitor effortless. Where I struggled was connecting power to the camera on the rear bumper. I was nervous to splice into my brake lights. I originally tried to splice into my license plate light, but my license plate light didn’t work to begin with, so it obviously didn’t work to power the camera. I should add, I have a 16 foot box truck from 1992, so it has its own problems being that old. After doing a couple google searches I was able to figure out the proper way to connect the camera to my reverse lights. LeeKooLuu provides really handy wire splicing pieces that make it a breeze to connect the power and ground for the camera. Once power was ran to the camera, so whenever I put my truck in reverse, it displays on the monitor immediately. The monitor is amazing quality, the depth perception is easy to make out, and it’s proven to be well worth the time and investment. I only used one of the two cameras for now because my idea for the second one was to put it on top of my truck in the rear, but unfortunately there’s no power anywhere up there. Overall, I would highly recommend this product. It’s an excellent deal, high quality, and overall easy to install.

I tried extension mirrors, I couldn't see any better behind that without, maybe a larger view. I searched hard and finally ended with this backup, rear view camera system. The camera is simply wired into my licence plate light, so it is always on when driving and I don't have to worry about charging. I also like how it integrates into the license plate frame. It is Bluetooth to the monitor, so no wiring. The monitor is crystal clear and simple to operate. My trick though, is I do not mount it on the dash, I use it without the mount and rubber-band it over my rearview mirror. My rearview mirror serves no purpose with the trailer blocking my view, and it's where I've been looking forever to see what's behind me, so it feels very natural. I highly rate and recommend this one! (Just realized that I need to copy and paste this Amazon review.) 😎 I left this review on one of my trailer groups and decided I need to share here.

This is my second one. Mounting on window sticks on and will not come off. Easy to install and Excellent picture quality. Compares to the factory one in my Toyota

utilisé sur une machine à vendanger fonctionne parfaitement, trés facile à installer il faut juste trouver une alimentation + pour la camera (je l'ai branché sur un phare de travail) tout fonctionne parfaitement

Camera and monitor work well

As advertised. Easy to install. Wired it to my backup lights. Clear picture. Works well.

Install was a breeze , I simply removed my centre rear running light and replaced it with the camera which gave me a power source without having to make any more holes in the RV’s siding. The picture came up instantly on powering up, the picture is very clear with good colour. The screen is also equipped with a sun shade to reduce glare. I am very impressed with the quality of this device as well as an excellent value compared with similar products I have seen.