Spigen Style Ring 360, Phone Grip/Stand/Holder

This works so well. It is level on the bottom, so there's no sliding around or tilting. It will wear out after several months and have to be replace; but, that is not an issue.

Great! A little hard to spin when using to hold phone, but that's nice because it's study and doesn't drop down or move when using as a stand. Cute gold color, too. Overall, would recommend! Update: used for probably 3 years nonstop - it was great! Simple, stuck to my magnetic car mount. The color held well over time - obviously it faded on the edges over time. Ultimately the pin that held the finger hole came out, but it didn’t let go without a fight. Used for years and will buy again.

UPDATE: even worse than I originally thought. I figured I’d try one more time since I really like the size. Second one lasted about 2 days before it became floppy and THE PIN HOLDING IT TOGETHER IS COMING OUT!! Horrible quality. Original: Didn’t even last 2 months then started flopping all over. It had zero tension left after less than two months and was useless. For this price I would’ve expected it to last at least 6 months. Still gave it two stars because it is a great size and starts off strong.

UPDATE: One of these lasted about 18 months of daily use on my kindle. Third one is still okay after six months although the red finish has chipped off - it's on my phone which does get pretty rough use tho. The hinge bar starts slipping to one side and eventually comes out of the other side and then it's really loose plus having to avoid the sharp edge of the bar. I keep buying another tho because I really like the design, until the hinge bar starts moving, it's got enough stiffness to stay in one position without being too stiff to adjust it. And I like the circular design. But I wish that Spigen would improve the quality on this product. I've loved all their other products. ORIGINAL REVIEW: I love this BUT I have the same problem as another person, after only three months of use, the hinge is coming loose, one end has popped out and it's pretty sharp and the ring is all loose and floppy. I've ordered another one cause I love Spigen products but if it comes apart too in a few months, I'll have to try another brand.

I bought this almost 4 months ago and I've been waiting to write a review to see how well this holds up over time. I've gone through so many ring holders, popsockets, phone grips, etc. over the past year and I would say unequivocally, this is the best, most durable one of them all. I've bought Spigen phone cases in the past that were very high quality for the price, so I thought after about 20 different failed phone grips, I'd give this product a shot. I'd been putting it off because it's a bit more expensive than the cheap ones that come in packs of 3 and such. -it's still stuck tightly to my phone case. I have had 0 issues with it coming unstuck. -the swivel function of the ring has remained perfect. On other ring holders, it will get loose over time and spin a little too freely. -one issue I've had specifically with ring holders is that within a month of use, the screws holding the ring to the base will get loose and stick out, which would affect my ability to fully open and close the ring. I still have no issues with the screws coming out on this one. -related to the screws loosening, once those come out, the ring part will often flap around, which means you wouldn't be able to stand the phone on it's side. I'm still able to use the ring to stand my phone up in landscape mode with this ring. -the back of this holder is flat, so resting the phone on it's back gives me few issues. I found popsockets and some other ring holders to be too tall and/or rounded to keep my phone from flopping around when placed back side down. I guess the only downside is that the ring holder has the Spigen branding written on it, which I don't like, but you really won't find another phone grips of such good quality anywhere else on Amazon, believe me. I think I've tried them all at this point.

I love the ergonomics of this. I've had this for a couple phone cycles now. However the last two have had the same issue. The tiny bolt that holds the two parts together loosens on its own and can't be put back on. I thought maybe it was just a fluke on the last one but now a few months later its happening on the new one. I'll have to find another solution as it becomes to loose to use after a few months.

I've only tried 4 ring grips, but this is by far the best. 1) it's compatible with magnetic phone holder/mounts. I didn't imagine that any wouldn't be compatible but then I got one (Ringke) not made with ferromagnetic metal and was disappointed not to be able to use my magnetic car mount. 2) It is wonderfully slim. I haven't had another with this flat of profile before and it's nice that it doesn't protrude from my phone very much. 3) The flat side of the ring makes it much more stable and resistant to tipping when the ring is used as a "kickstand." 4) The "kickstand" attachment feels really secure. Time will tell if it lasts after more than a month of wear, but other ring grips I've had either didn't work as a kickstand as new or stopped being able to hold up the phone (instead they just folded open/closed) after a short time. The only slight negative is that it's somewhat hard to rotate the ring around. I'm not able to do it with one hand, I have to hold my phone with the other hand in order to rotate the ring (e.x. to have the kickstand portrait vs. landscape oriented). Overall, this is a great ring grip and I will definitely buy this again next time I get a new case/phone. Update: after almost 6 months of use, the "kickstand" functionality of this ring is still perfect. I occasionally set my phone (Pixel 3) on a desk to read or view a video, and my phone stays solidly up at an angle and is able to withstand tapping/swiping for navigation/typing just fine (provided one doesn't jab unnecessarily hard). The color at the edge of the ring is wearing some but not enough to make it look unacceptably bad in my opinion, but I attached a photo for you to be the judge.

Could have been a one-star review, but gets an extra point for appealing design. (Small, low profile, flush with the cutout in my phone's case). Used it on iPhone 8 with shiny glass back with this stand glued directly to the phones glass back. Despite alcohol cleaning and prep first stickie peeled off in about a month or two. Used it mostly as a stand (much rare use as finger loop). After first stick pad failed (phone fell but was saved by the case), meticulously pre-cleaned and dedusted the area for second sticky pad. Stopped using it as finger loop. Don't trust it any more. Mostly use as just a stand. A month after still holds with that careful use. This is not reason for would-be one-star review. Tough shiny glass surface - so minus a star or two only (and a tiny bonus for including a spare sticky pad). The bigger reason for nearly one-star review - design of the hinge is bad. The peg holding it together gradually slid out of the hole with use (see video). At this point only one side of the hinge is held and I don't trust the thickness of aluminum there to hold. Good looking on paper, not worth investing your time or money unfortunately.

Fäster bra på ett texturerat skal av TPU utan problem. Fin kvalite på produkten.

Muy buena calidad y precio asequible. Robusto y a la vez bonito.

After one month of use the ring became loose I think the screw that holds the ring to the base is the reason.

Super design

Good adhesion. Stuck very well even on my matte finish phone cover. The ring revolves around so it is very convenient.