Fanttik E2 Ultra Electric Screwdriver, Screwdriver for Electronics (Grey) | 50 Magnetic Bits, Max.0.6N.m, RevoStor Magnetic Storage, 5/32''Hex Screwdriver for PC, 3D Printer, RC Cars, Drone

Great little set. Screwdriver has multiple torque settings, and the bit selection is terrific. The bits are on the smaller size and great for finer work on small electronics. I use mine for PC builds. Magnetic bits make working with small screws easy. The storage case and rotating bit system is terrific. Lasts a long time on a single charge.

I've accumulated quite a collection of precision screwdrivers over the years, both manual and electric, and this has quickly become one of the ones I reach for most often. I primarily use it for working on 3D printers, desktop computers, robotics projects, electronics, and other precision assemblies. The torque is well suited for M2-M4 fasteners commonly found in printers and PC hardware. It's powerful enough to speed up repetitive work but not so aggressive that you're constantly worried about stripping threads in plastic or aluminum. The bit selection covers nearly everything I encounter during printer maintenance and upgrades, from hotends and extruders to AMS units, motherboards, fans, and sensors. The magnetic bit retention is solid, and the bits themselves seem well machined with a precise fit that minimizes cam-out. The screwdriver is lightweight, comfortable to hold, and has good balance, making it easy to use for extended repair sessions. Battery life has been excellent, and USB-C charging is a welcome convenience. The case is compact, organized, and easy to toss into a toolbox or printer maintenance kit. One thing worth understanding is that this is a precision screwdriver, not an impact driver or high-torque electric screwdriver. If a fastener is seized or was installed very tightly, I always break it loose manually first, then let the Fanttik handle removal and reinstallation. Used this way, it excels. For anyone who regularly builds or maintains 3D printers, PCs, drones, RC equipment, robotics, or consumer electronics, this is an excellent addition to the toolbox. It has saved me a lot of time on repetitive disassembly while still providing the control needed around delicate components. Highly recommended.

I recently ordered up the Fanttik E2 Ultra Mini Electric Screwdriver to help with a liquid cooling upgrade on my gaming rig, and it has been an absolute game-changer. Why I Love It: Lightning Fast Delivery: I needed this for a weekend build, and it arrived much sooner than expected. Kudos to the shipping team for the quick turnaround! The Ultimate Bit Selection: This kit comes with every single bit I could possibly need. Whether it’s standard screws or those tiny, specialized ones found in electronics, I didn't have to go hunting through my old toolbox once. Perfect for PC Building: I used this specifically to install a new AIO (All-In-One) liquid cooler on my PC. The precision and torque control made mounting the pump and fans a breeze. It’s compact enough to maneuver inside a tight case without bumping into the GPU or RAM. Premium Feel: It feels solid in the hand—not like a cheap toy. The electric motor is smooth, saving my wrists from the repetitive strain of manual screwing during a long build session. Final Verdict: If you are a PC enthusiast or someone who tinkers with electronics, the Fanttik E2 Ultra is worth every penny. It turned a tedious installation into a fun, quick project. Highly recommended!

This thing is incredibly torquey! Totally worth the price of admission if you take apart and put together devices with tens of little screws on any regular basis, saves so much time and doesn't gas out... it can actually be difficult to keep hold of it at higher settings. Down sides, the pop-up mechanism, while cool, only pops it up about a centimeter, which isn't enough to get a grip on it. So I end up turning it on its side, which is less cool. It's completely round which means it will twist VERY easily in the hand, to the point it's difficult to index or maintain your grip on it without having it spin between your fingers; a more oval shape actually would be an advantage, or at least some knurling. The stowage design doesn't allow you to leave a most-used bit inserted, you have to take out the bit every time you put it away. The stowage system also is very tight tolerances, meaning no adding friction tape without making the case useless. All of these are relatively minor gripes though; overall it's already a major asset to my workbench, and saves me minutes on each repair.

For the actual tool functionality portion of this kit, I give it 5 stars and for most people that's all that will matter. The bits fit into appropriate fasteners well and do not strip screws. It has adequate torque to handle anything I've thrown at it, assuming you're not trying to build furniture. This is an electronics set for for that I use it. It is very easy and the battery life is great for anything I've built. It seems durable and none of my bits have been chewed up or eroded. The primary compaint with this set is the storage system. It is very good, as long as it is never jostled, dropped, or knocked over. And unless you're extremely orderly with your kit and never transport it, you will eventually jostle, drop or knock it over. Every bit is affixed inside by a rotating, magnetized spindle. Any jarring of the device/container (such as transporting it in a tech backpack and dropping your pack on a desk) will knock the bits loose and leave them in a pile. Best case scenario is that you have to put all of your bits back into their proper spots which is tedious. Worst case scenario is that the bits get wedged into crevices and prevent you from turning the spindle or easily retrieving the bits that cause the jam. This is extremely irritating and a major design flaw in my opinion. Ultimately, I'm not going to deduct a star for that because in the long run it is a tool and I believe I should be reviewing how the tool functions, not how it looks or is stored. If what I wrote about the storage system would apply to your concerns, knock off a couple stars because it is that bad.

I needed a electric precision driver kit ASAP, I didn't want something that would fall short of my expectations. I did actual research, not just read customer reviews and Fanttik's E2 kept popping up! Even their E1 in slightly older more dated reviews as well. I then did a side-by-side between both of the drivers, the E1 and E2. Its an absolute no brainer! The E2 is heavily upgraded from it's predecessor! Even better I bought it on sale! Beyond worth the price!!! Fit and finish plus the packaging and bit storage is all great...... the driver itself IS the BEES KNEES!!! You can feel the quality the second you use it!!! Again, the rotating bit-storage tray is unbelievably convenient and easy to use. Not to mention the driver's storage, it's vertical in a spring loaded "click-in" cradle or a slot right in the center of the storage tray. Just a very, extremely convenient and very dapper piece of equipment! It's gonna be with me a long, very long time!!!

This set is practically ideal — everything is well-designed and works flawlessly. I particularly appreciate the extensive variety of bits; there's a great selection, and every single one is practical and useful for different applications over time. The only slight inconvenience is the handle's thickness — it feels a bit too thin, though that might be an intentional design feature for precision work. Overall, I'm very satisfied with this purchase. I've only used it once so far for a brief task, but it left a great first impression. As of now, I definitely recommend it and consider the price fully justified!

Good driver, lots of power and bits for most of what I need to fix. It's easy to use and adjust the torque settings, and the carrying case and organization is nice. The magnetic attachment is strong, though sometimes the bit sticks to the screw I just screwed in. Seems to happen on a lot of electric screwdrivers, so not really abnormal. That being said, the lowest torque setting (claims 0.05Nm) is way too strong. It always felt like it would strip screws when I used it to remove screws. At some point, it actually sheared several screw heads clean off on the lowest setting. Purchased 2 and had this issue with both, so I feel it's not just a defective unit unless I'm just that unlucky. I feel like the listing isn't being truthful here about the power, whether intentionally or not. I compared it to the E1 Max, which also claims 0.05Nm for the lowest setting, and that one feels much more in line with the power that I need for my repairs. The E2 Ultra is just... too strong. If you want something stronger, though, I guess the E2 Ultra would be just right. Just be careful when tightening phone screws...

Just enough power to actually be usefull but not too much so it doesn't strip stuff. Just small enough to fit where it needs to and has all the bits you actually need. Plus, you get a mini prybar!

very good

كولتي عالي ومنتج جميل

The screwdriver set is designed to be for electronics and claims to be a torque screwdriver, but when I got it, it would strip screw heads on the lowest torque value of 0.05NM which does not match how a torque screwdriver is meant to operate, for instance my other Fanttik S2Pro set on those same screws with 0.5NM would make an ugga dugga sound when torque value was reached like you hear from torque guns for mechanics, with this in mind I felt the need to return the driver because it was less suitable than a screwdriver 20x more powerful than this screwdriver, simply because The E2 does not stop turning bits when it reaches the set torque value. Other than this it is exceptionally powerful for its size, easy to use, has great battery life and a very creative rotary door style storage mechanism, very durable case but I have noticed that dues to the cases design, you pop it open with a press to the top, which I realised if you turn it upside down and give it just one small shake up and down, the whole storage mechanism including the driver comes falling out! This is not ideal at all and should have a way to lock the internal into the case, to stop this happening naturally as you carry it!

Funciona genial para desmontar portátiles y facilita mucho las cosas. Gran producto