Phanteks Eclipse P350X (PH-EC350PTG_DBK) Compact EATX Mid-tower Case, Tempered Glass, Digital RGB, Black

First off - I find this to be a VERY attractive case. The built in RGB is tastefully done - not like that brash "in your face" disco style that some others do. The built in addressable RGB controller means you have everything you need to run moving patterns without any software, and it daisy chains out to run additional rgb accessories you might want to add. It can also connect to any ARGB motherboards so the case can run off that if you'd like - but be aware there are 2 major types of RGB: Addressable (3 pin) and not (4 pin)... The addressable 3 pin style is the newer tech that allows "moving" display, while the older 4 pin style can only change in solid colors. Many companies like Asus advertise their "Aura Sync" RGB features - but even that comes both ways and the 2 are not directly compatible with each other. IE - my Asus Z390 Prime-A motherboard advertised "Aura RGB", but it uses the 4 pin style that cannot connect to the P350X case. Not a deal breaker for me, and if anything it's the motherboard that has the older technology. The case build and materials are better than their $69 price suggests, but the screws don't go in quite as smoothly as a $200 case would - but in reality, how many times are you really adding and removing pci cards and the like? Again, hardly a deal breaker. In my opinion, this case is designed for air cooled systems - while you could fit a 240mm AIO in front, I think a 280mm AIO might be tight, and the bottom "basement" goes right to the front so anything longer will not fit. Likewise, although you can fit some fans up top, there isn't enough clearance for an AIO. And while I guess you could mount a 120mm AIO in the exhaust fan area, I doubt that would work well. But again - this case was designed for air, and in my humble opinion a good air cooler performs as well as an AIO and will run trouble-free for much, much longer. With that in mind, be aware this case only comes with (1) 120mm pwm fan mounted at the front - you are really going to want to add at least 1 if not 2 or more fans to this system (in addition to the cpu cooler). That pushes the actual price up towards $99 which puts it in direct competition to the Be Quiet Pure Base 500DX and the Cooler Master H500, both of which come with more fans out of the box. I seriously considered the 500DX as it is very similar in appearance to the P350X (and has the same airflow design, if not a tad better), but it is nearly 2" wider which makes it look a bit "squatty" to me. The H500 is a great budget airflow case, but I was looking for something different from the "rgb fans up front" look. But you probably couldn't go wrong with any of those at the same basic total price. Building my system in this case took all of maybe 30 minutes - it was very easy and there's plenty of space for cables and wiring. The front leds connect through a clever pin contact system so there are no wires attached to the front (which you need to remove in order to locate the hidden parts box that is stored in the front bottom 3.5 drive trays). It's well thought out, with attached Velcro strips in the back side for cable ties. There is also a removable dust filter under the power supply area, which is designed to mount fan down since the "basement" enclosure has no other source of air. All in all I am very satisfied with this case - it looks great, was easy to build and the materials seem upscale for the price point. Just be aware you really need to add a few fans to it.

What can I say, I ordered this case to replace another case that I had bought to fit my EATX board, was skeptical at first because the former case specified a larger area for the motherboard and it didn't fit, so I was worried that this one wouldn't either, but alas, it did. This quality of this case is far from it's price point. Somewhere of the $100+ area. The tempered glass looks amazing and the subtle RGB accents look great with a fair bit of customization. There is ample mounting for all your storage needs and cable management is very good for the case's overall size. Couldn't be happier about my purchase! Only CONs I can think of, is 1, depending on your motherboard, and/or your type of AIO cooler top mount might be quite tricky, there's not much room up there, but I think this case is intended for front mount. That being said, if your AIO has short hoses you might get into a tricky bit going to the front. 2) In order to fit a front radiator, there is no support for any 5.25" drives at all. No big deal for me because I have an external optical drive that I've always used anyways. UPDATE - Still loving this case, ended up putting a Zotac Amp Extreme card in this case, and moved my mini to my Node 202. Anyone that knows about video cards knows that the Amp Extreme is a giant card, and it fit without a hitch, that being said, there's only about 10mm between the end of my card and my radiator. I could widen the gap by mounting the intake fans on the outside of the case moving my radiator about 25mm to the front. But, thermals are ok in the current setup so why bother right?

My uncle dropped my case trying to help me during my move out. He dropped it from waist height. Though to my surprise, the tempered glass was completely untouched, while the scratches aren't that noticeable. I would give the case 5 stars for that alone. #Pros: - The tempered glass is quite strong. It's easy to open that side if you want to tinker. - I love the embedded RGB light streaks. Lightnings are very subtle, and you can change them on the fly. They definitely add some flair to the case especially in dark environments. - For the price, hell yeah, it's a big value. It's almost half the price of any other RGB case. Not to mention, it includes 2 dust filters for FREE! - Matte coat finish gives the case an illusion that it's a high end product. - Airflow is sick. You can install up to 5 fans, and I do just that with Noctua fans. They come with 1 Phanteks pre-installed upfront. Though, I move it to the back to install 4 more Noctua for stronger airflow. You cannot hear a thing even on high workload with heavy graphic games. - It is roomy inside the case. My graphic card is a dual-fan Radeon RX 580. But there's still room to maneuver and add some decorations. - They include 2 brackets for SSD. Huge for future upgrades! - HDD can be installed when you take off the front panel. Super convenient. #Cons: - Cable management is bad compared to the 400X. It's a bit jammed. - There's no reset button. You can hold the power button for few seconds for a hard reset. - 3-pin RGB slot. It's odd since motherboard market offers 4-pin and 5-pin a lot. - Light streaks give you a taste of RGB. You'll become a RGB hoe. The case is 11/10 for the price, value, and functionality. Would buy again in a heartbeat. Would recommend this brand over the big guys.

The case is nice and fits my needs, however I was very disappointed to discover that the RGB motherboard connector that comes with the case is only a 3 pin connector and can NOT be used with the 4 pin header that most motherboards have. There is no adapter for this. What this means is my ASUS B350F motherboard which has Aura Sync (and provides 2x 4 pin headers) can NOT be used to control the "Aura Sync Compatible" Phanteks p350x. For those not concerned about syncing their RGB lighting across the system, this is still a good case. The lights still work just fine and are controlled by 2 buttons on the top of the box when plugged into a SATA power connector. The cable management is good but not great, mainly because the holes are a little small to fit things through. I was able to manage a clean look with a little effort and some squeezing. Luckily I have a modular power supply so I could exclude cables I didn't need. The space that hides the PSU gets pretty cramped once all the cables are in. The other thing I was disappointed in was the fact that it only comes with ONE 120mm fan. They don't hide this fact from you... I just didn't see it in the details when I purchased it. I went ahead and ordered 4 additional fans from Arctic: 2x 140mm F14 PWM fans as well as 2x F12 Ultra Quiet Silent fans. I used the 140mm fans as intake on the front and the other 3 fans (the included and the two from Arctic) as exhaust on top and back. The specs from these fans showed the airflow should be nearly equal with just a bit more positive airflow to help from sucking in dust from all the seams. Overall, it is a great looking case with very good airflow (once you get the additional fans). The tempered glass looks amazing with the included RGB strip underneath it. No RGB installation necessary. Plug in the power and use the buttons to pick your colors and modes. Deducted the star for the use of a 3 pin RGB cable and no option for a 12v 4 pin RGB connector, as well as small cable management holes.

This is a really great value case and is really nice too. at this price with tempered glass, RGB, good airflow and easy installment/good cable management, what is there not to love. The quality inside and out are really good with all the basic 2018 needs in one cheap package not to mention it looks great and clean all together with the design fitting well with my entire setup. I think Phanteks out did the competition, even against the likes of NZXT and Fractal with this great case. I didn't buy this case because it was cheap, I bought it because I saw great reviews back in CES from tech tubers and when I saw it, it immediately became by number one favorite case I waited to release since january but this was before i knew the evolv x was coming out

Professionally I am working with computers worth a lot, mostly they are the top-shelf monsters from HP and Dell with their really thoughtful cases. So there I am spoiled in case anything needs to be accessed. Personally I have had a cheapo-low-end case from student days and one home-cinema case. When I have ordered this case I expected something plain and simple, with the LEDs not being in focus but the overall appearance. The case was delivered well packed with a small box of screws and a brief instruction. There is not much more to a case. When I started the installation of my components it came naturally where all cables have to go because the design is really easy and geat! There are opening to to cable channels just on the places the connectors for the mainboard are - it was so super easy to have a clean and nice looking installation like I would have never expected from a case of this price category. Then, the USB connectors on the top were bad - they wobbled and it was not possible to use them reliably. I wrote to Phanteks support. They only asked for the purchase receipt and sent me the entire I/O block via mail - from first contact to received replacement parts it was not even 4 days! The installation took me 15min - without instruction. The case is constructed so that an instruction is not needed for this task even. I think the next case I'll buy will be from Phanteks again because of the smart design and superb support.

The design of this case is beautiful. Looks clean and sleek. The minimal rgb strips are perfect. There's even another one under the PSU cover that isn't mentioned in the description. It looks very nice. Matches my kb+m perfectly and synced up to icue without issue. There's plenty of space in the back for cable managing and a few extra ports for peripheral cables. Only downside is the case only comes with one fan in the front. Could def use another fan in the back just for common sense exhaust. It would only be like another $5. Full atx board with a 1660s fit with plenty of extra space. There's a lot of space for fans and you could prob fit a decent sized radiator in the front.

This case was great to work in, it looks great, and the price was fantastic when compared to other alternatives. They allow for RGB power via MoBo or sata, and the RGB modes look great. No issues with ATX MoBo, power supply basement has good ventilation, and the case is well vented with a mag filter on the top. Only minor issue that I had was a slight rolled edge to the PCI card mounting rail and my super old GPU (since replaced) had some trouble being mounted because there were screws protruding slightly from the blower style cooler. Newer rx 580 had zero issues with this rolled edge. Knocked off one star on materials for a lack of grommets on the cable management holes, but there are no sharp edges and I would never hesitate from buying this case again.

I'm really pleased with this case. It has good build quality and sells for a reasonable price. The case looks good with integral RGB lighting and is a pleasure to build in. Plenty of space inside, storage for hard drives in a convenient position at the front of the case behind the front cover. Great value for money, I would recommend this to anyone who is on a budget but doesn't want to sacrifice quality. Edit: 7 Feb 2019 have had problems fitting a Corsair H115i pro 280mm AIO cooler in the front of the case. The wiring for the case switch/usb ports restricts movement of the radiator and I have had to wedge the radiator in place. None of the screw holes line up. The case is supposed to support 280mm radiators. I would have been better off getting a 240mm Cooler. Other 280mm coolers might fit better. I tried every way possible to mount the radiator i.e. fans pushing and fans pulling.

Non avevo mai acquistato questa marca prima d'ora, e dunque ero ovviamente un po' scettico all'inizio, ma visti gli ottimi rapporti qualità/prezzo mi son deciso ad acquistare questi case finestrato dall'aspetto premium. Non appena ho aperto la scatola mi sono accorto che si trattava effettivamente di un eccellente case, ottime finiture, vetro perfetto, e eccellenti materiali. I materiali sono principalmente alluminio, plastica e vetro, anche se le parti in plastica sono veramente poche, come l'alloggiamento degli hard disk e la parte frontale con trattamento satinato. Gli interni di colore bianco sono completamente in alluminio. Il montaggio del pc è stato abbastanza semplice, grazie alla presenza di numerosi alloggiamenti dove nascondere o fare passare i cavi, anche se avrei preferito un po' più di spazio tra l'alimentatore e gli hard disk: unica vera criticità di questo case. Senza un alimentatore modulare sarà difficile farci stare tutti i cavi all'interno di questo case, nonostante lo spazio non manchi. Il case è dotato di illuminazione rgb compatibile con tutti i sistemi di sincronizzazione di Asus, MSI, Gigabyte e via dicendo. È dotato di due strisce a led nella parte frontale e una posto poco sotto la paratia di vetro: i led donano un aspetto veramente premium ed elegante al case. Sono completamente programmabili tramite due tasti posti nella parte superiore, parte in cui troviamo anche un'uscita audio e per il microfono, assieme a due porte USB 3.0. Per quanto riguarda i filtri antipolvere ne troviamo tre, uno nella parte frontale, uno nella parte superiore (magnetico) e uno nella parte inferiore sotto l'alimentatore (estraibile tramite un comodissimo carrellino in plastica). Detto questo, se cercate un case finestrato, dotato di illuminazione rgb, copri-alimentatore e con ottime finiture, questo è ciò che fa per voi. Il costo di un prodotto simile ma di altre marche si aggira intorno ai 150-160 euro almeno, e questo lo rende uno dei migliori case per rapporto qualità prezzo

Esta muy bien la caja el problema es que el interior es algo pequeño y si tienes pensado incorporar una refrigeración liquida de doble ventilador con un radiador es casi imposible. La refrigeración que intente incorporar en esta caja era la "Corsair Hydro Series H115i Pro" para que te hagas una idea, al final tuve que mirar otra caja con unas dimensiones mayores. Esta caja me la quede y monté un PC de otra gama para un miembro de la Familia y por lo que se hasta día de hoy esta muy contento con la Caja Phanteks Eclipse P350X TG RGB Negro/Blanco Tiene una Buena Fluidez a la hora de refrigerar todos los componentes. Valoración de la Caja 8.5/10

Love this case. It's the best one I've ever had. The size is ideal for me. Not too large with wasted space but not cramped by any means. Sits on my desk without looking like a massive log burner. Build quality is great. RGB is a nice bonus.Goes well with my RGB mobo. It's got everything really. Space, cable ties, PSU shroud,RGB, front ventilation, looks. The glass is very slightly tinted. Not so dark you can't see stuff. In real life the front looks much better than the photos and it's a very attractive case imo. The front fan is quiet and I can't really hear much at all tbh, although it's a fairly quiet pc even with no panels on. Can't find any fault with it at all.

Eccellente case con anche un ottimo impatto visivo, installazione non complicata belle le luci e non disturbano.