M.2 A+E Key 2.5G Gigabit Ethernet Network Card, Realtek with RTL8125BG Chip | 18-cm Cable Length, 10/100/1000/2500Mbps Single RJ-45 Port, Support Windows/Windows Server/RHEL/CentOS/Debian

Got 2.5Gb/s after updating the driver. Cable was too short on an HP Elite 800-G4. On the Dell XPS 8920, the card was a tight fit against the PCIe slot.

I used this in a SFF build that only had a small wireless card port. I'm getting nearly full 2.5 gigabit speeds with this little guy. Works great!

Very niche product that works for my very specific use case. I wanted to upgrade my Lenovo M700 Tiny with some higher speed networking as it has a DAS attached storage and Unraid on it. I was able to install it in the wireless card class that was close to the power button. The very tight fit, but was able to fold the cable under the card and route it to the back. I was able to pull the PCI brackets off the Ethernet port and use the screws and holes to attach it to an unused serial slot punch out. I used a piece of electrical tape to cover the bottom of the Ethernet port PCB to keep from shorts. It looks factory! Unraid 7.1.4 picked it up without any issue and able to see 2500 Mbps connection. (Router confirms as well) Initial speed tests seem to confirm it. Hopeful that the RTL8125 will be reliable as the Intel I219-V has been. Three complaints. First is on Amazon, the packed was crushed. Luckily it was packed in a strong plastic case. Second, the cable is very short. Even in my tiny client PC, it took some creative routing. I would appreciate a bit more length on the cable. Third, please include a screw for the M.2 please. I can understand a commodity SSD not including a screw, but this is a bit more niche. Even a cheap screw driver was included. Overall, a great way to add higher speed networking to a mini PC. Unraid worked out of the box.

Unfortunately the quality control on these is horrendous. Something in my unit is broken, as my host recognizes the PCIE device, but never gets a link. The lights don't come on whatsoever on the RJ45 end, and it never gets a link. I've verified the wiring is correct, the orientation, everything. Nothing seems to work.

Used these as an extra NIC on my proxmox cluster that is comprised of Lenovo mini PC's, they work great at the speeds they are rated for. Fit inside of a vga sized cutout that was unpopulated, so they were plug and play, no case mods needed.

works out the box. no problems. gave nas transfer speeds of ~280Mb/s on private network. nice that it uses PCIE-X4 so it can fit in the mini slots on the motherboard. happy with the purchase!

After installing drivers for the realtak card, it works great. However like everyone else it came with the low profile bracket attach and the full hieght on is not design for this card, so if you have a 3d printer you will need to make a bracket for it.

Removed the onboard wifi from my motherboard and put this in its place so I could get the full speed of my internet/local network. Had to mount it externally due to lack of a slot. Was basically plug and play on an Unraid setup.

The item description mentions 30cm cable. But it is hardly 20cm long. Wasn't long enough to install on my Optiplex 5070. So I had to build a custom cable myself. But the module itself works and reaches 2.5G speeds.

Works well once wired correctly. Comes with no connection details, just pictures on the product page. Pay close attention to colour positions. It took me 3 goes to get it correct.

Esta perfecto funciona al 100 con debían y openmediavault, lo que falla es el disipador no es tan grande pero funciona al 100