LASER TREE Laser Module, 10W(10000mW) Optical Power Output Laser Engraving Module with Air Assist, Built-in FAC, Double Ultra-Fine Compressed Spot Laser Head for 3018/3018 Pro CNC Machine Class 4, 12V

Great laser module! Easy enough to modify for any other laser projects with a 12V (2Amps or more) battery pack or power supply the dual laser collomating housing could use better dust sealing to prevent debris from getting on the internal lenses

Si bien aún no lo he probado ya que requiero apoyo de un soporte para conectarlo a mi equipo, el módulo es el solicitado, embalaje perfecto, precio acorde con el promedio, llego a tiempo, condiciones perfectas, muy recomendsble

Is easy to use, but you need to check the cnc3018 driver. The driver's pin assignment was not the same than as the laser. Therefore, i needed to swap the cables. I don't know what would have happened if I had changed the cables incorrectly.

I bought this to add the laser capability for my 3018 CNC. The module was easy to mount as you replace the router spindle and slide the laser module in. I highly recommend buying the LASER TREE 20W 40W 80W Interface Adapter Board Transfer Board and the COOLM 12V 4A Power Adapter AC 100-240V to DC 12V 4000mA Power Supply 48W Adapter. The board was needed because my motherboard would not supply the wattage needed for the laser and the adapter corrected this. To use the adapter, you will need the correct cable to go to the adapter board from your motherboard, then use the supplied cable from Laser Tree to go from the adapter board to the laser. The adapter also solves the problem of going from 2 pins on the motherboard to 3 pins on the laser if your mother board is equipped that way. I have engraved many items and hope this lasts a long time. I have engraved tumblers; tile coasters and wood plaques and the laser has always had enough power to get the job done.

What a great idea. This laser is designed to be used in 3018 cnc machines that have a 42mm diameter motor. The pro versions tend to have 52mm motors. It will still work but you'll need to make your own shim to mount it. This connects to your controller using an included 3 pin cable. (+12V, Ground, PWM signal) The cooling fan comes on whenever the 12V is on. It comes with an air nozzle and hose. You'll need to supply your own air pump. I recommend using an air pump if for nothing else than to keep the lens clean from smoke. Ignore any references to "80W". Nothing with this laser uses 80W. The optical output is rated at 10W using two 5W LED lasers with a beam joiner. The included 12V power supply is 48W. I was able to easily cut out a model airplane rib from balsa wood. It comes with clear plexiglass pieces that help set the beam focus. It's a little different depending on whether you're cutting or engraving.

I bought this to replace a 5w laser that stopped working. This module works better than expected. The only Issue I had was that the cable that came with it was not wired correctly, I used the cable from the other laser. Would recommend this product.

Great product, just as described

It came in on time and looked to be well built. I tried to install it on my 3018 pro max and it was about 3/4" to small in diameter to fit the holder. Amazon made it easy to return.