Amico 30 Inch Nickel Low Profile Ceiling Fans with Lights and Remote

I’m very happy with this ceiling fan. It looks modern and stylish, and the low-profile design fits perfectly without taking up too much space. The fan runs quietly while providing great airflow, and the light is bright with useful color and dimming options. I also really like the convenience of the remote control and the reversible blades, which give you two different looks. Overall, it feels well made, works great, and was an excellent addition to the room. Highly recommended!

I really like this ceiling fan. It looks modern and fits nicely in the room without hanging too low. The fan runs quietly and provides good airflow. The remote control is convenient and easy to use. Overall, I’m very happy with the quality and how it looks.

With so many choices of fans to choose from it was a difficult decision. We have a small room about 10’ x 10’. This is the perfect fan though light is very bright and has three different color variations to choose from and dimmable. The fan does not make any noise. It’s perfect. I’m so glad I picked this fan and light. Also, it’s very affordable.

We lost our previous ceiling fans due to several power outages and they were no longer available so I ordered these fans as a replacement. The fans look nice, are low profile, and create adequate airflow. Unfortunately the list of negatives outweigh the positives. I purchased two of these fans and both have the same issues. The first problem is that, at fan speed 3 and above, the fans make an irritating clicking noise from being ever so slightly out of balance. The fans are mounted to proper ceiling fan mounting brackets. This clicking was present in 1 fan immediately, but didn't happen to the second fan until about a week later. I spent about an hour trying to balance the first fan, I've had success with fan balancing kits on past fans, but I couldn't make any considerable improvements here. The fans are very close to being balanced but even just a VERY small amount of wobble causes the clicking noise. The clicking comes from the mounting plate when it pulls away from the ceiling paint. The mounting plate is plastic and is inherently flexible. When the fan rotates the edge of the mounting plate flexes away from the ceiling, not even enough for a sheet of paper to slide between the mounting plate and the ceiling, but this is enough to produce a clicking noise when the plate separates from the ceiling paint which it very lightly sticks to. Because I was not able to resolve the clicking by balancing the fans what I ended up doing is removing the fan from the ceiling, loosening the mounting plate, and sliding parchment paper, cut into a ring shape, between the fan mounting plate and the ceiling. Neither the mounting plate or the ceiling paint stick to the parchment paper so if the mounting plate flexes away the unsticking sound isn't present. I reinstalled the fan to the mounting plate. The base of the fan surrounds the mounting plate but there is a small gap between the base of the fan and the ceiling, smaller than 1/8th inch. I carefully pressed 3/8", highly compressible, foam backer rod into the gap around the base. This really firmed up the connection to the ceiling and the clicking sounds from the imbalanced fan have been resolved. The second problem, which is the biggest issue because I cannot resolve it myself, is that the fans have a mind of their own. It took me a while to pin this down because I thought my wife may be pressing the wrong buttons on the fans wireless remotes. We keep the wall switch(normal, NOT dimmable) constantly on so that we can operate the fans using their remotes. At any given time the fans will change settings on there own. This includes speeding up, slowing down(we don't use the function that does this deliberately), the blade direction reversing, and even turning on or off on their own. We typically set the fans to run at speed 3 with the blade direction pushing air down. We live in the subtropics and one of the fans is mounted over our bed(why the clicking sound couldn't be ignored) and we open our windows at night. The fan needs to run properly through the night to stay comfortable. Frequently the fan over our bed will slow down or, even more often, reverse direction and I end up waking up in the morning sweating and uncomfortable from the lack of airflow. When the fan speeds up to speed 6 it actually wakes me up because the turbulence created at the edge of the fan blade is actually quite loud above speed 3. By the next morning the fans are almost never on the same setting as they were set to when we went to sleep. All that being said, the fans look nice, are a nice size, and quietly move a nice amount of air when they are at my desired setting. I have been using the fans for about a month and a half and probably would have tolerated the shortcomings of the fans indefinitely but now my wife is voicing complaints about the fans constantly changing settings so I figured it was time to share our experience.

I would give this five stars but I just installed it and have no experience with the reliability. However, I am very impressed with it so far. During installation I was a dismayed to see that it was mostly plastic, but it is so much lighter than the old fan, it seems a good trade off. Easy to install. The wire nuts are small to fit inside with the receiver and solid copper hose wires, but work well. The instruction booklet is finished with glossy pages and has IKEA-like picture instructions. Each section has a sentence of encouragement which appear to be the only translations from Chinese and better than most. I love the look and the fact that it is only three blades. It moves more air on low than our old five-blade with a down rod. At lower speeds, I can't even her it. At higher speeds, it sounds more like the air moving rather than the machine itself. The wind mode is an amusing option. The light is excellent. Dims to a very low level and at it's brightest is as good as our LED floor lamp. Overall, an excellent fan. Hope it lasts!

I bought this fan from Amazon a few months ago and had my electrician install it in my daughter's bedroom. While overall the installation was straightforward, within a couple of days we noticed the fan was going on by itself. After eliminating all external causes by checking with the adjacent rooms and even my neighbors, we reached out to the company by email, and they responded right away by suggesting sending us a new receiver and already paired remote. After receiving the package and having my handyman install the receiver, everything has been working perfectly. Another thing which we noticed was the noise when fan was running at level 3 and higher. After narrowing down everything else, we noticed the base was rubbing off the ceiling when the blades were moving, so we applied a two-sided tape to the ceiling and the back of the fan which resolved the issue. Overall, it looks nice, it is low profile and the light brightness is very good. The multiple fan speeds can cool any room size and the ability to adjust the brightness, and the light color are great features.

Love it. My bother has one and I liked it so got one too. Easy to install and so much lighter that the very old fan it replaced. Looks great. Very quiet, almost silent. Great fan speeds and bushes a good amount of air. Love the lighting options. Simple remote Great for a medium to small too. Like a bedroom. Well worth the money.

This fan works better than our older name-brand (and more expensive) bedroom ceiling fan. The Amico fan is much quieter and has a better light. I wondered how a less expensive plastic unit would compare with the older metal fan, and I'm very impressed. It may not look as stylish, but frankly I don't notice it because it blends well with our white ceiling. One minor issue is the product label on the outside of the fan housing. You might want to remove it off before installing the fan. It leaves some sticky residue, but that can be wiped off with Goo-Gone. The fan looks better without the label.

Una vez instalado, No funciono el ventilador, tienen algún servicio de reparación o sustitución ?

تم ارجاعها واسترداد المبلغ البضاعه نفسها جميله 🙄

not suitable for the middle east because it's 120V

Solo tienen 4 meses de uso y ya se descompuso, que pena porque se veía bueno.

Do not remove your existing light fixture until you fully assemble the new one. Assembly is strait-forward but they provided the wrong light that didn't fit the base. Both items I bought had the same issue. It took two weeks to get the correct light and they only sent one. Still waiting to get the second one.