Due to the small tank, does it constantly cycle running a 1/2 inch impact wrench?

Time to do math, this tank is a 5.2 Gallon, my 1/2” impacts consume from 4cfm on the low side (flex head 400ft/lb wrench) to 6.5cfm (top of the line 900 working/1600ft/lb bolt breakaway). I got compressor for its recovery speed, you can further reduce the noice many many ways, YouTube it, but every gallon only gives you .134 cubic feet, so this 5.2 gallon gives you .695 cubic feet of air. Low end wrench at 4cfm, 4 whole cubic feet a minute means .067 cubic feet every second, figuring how even if you turn the compressor off (so it doesn’t turn back up and start recouping) you’ll get around 10 seconds of air, 10x.067=.67 and you got .695. Now your compressor will kick on long before it gets that low and this isn’t an absolute perfect measure by any means cause your psi won’t be steady 24/7 but gives you an idea. This thing doesn’t have a huge tank but does have a very good recovery time for this price point (won’t find any sub $500 ones over 6cfm) this is meant to still be moveable, despite 75lbs but with the wheels and all it’s doable. If you’re goin for a shop compressor that won’t run often due to a 20-35gallon tank I mean this portable one shouldn’t be in your field of vision

Is it made in China or Taiwan? Where is the manufacture origin?

on the rear of the machine, down low between the wheels, mine says made in taiwan. good machine so far.

Can the female air couplings be unscrewed and changed out for high flow couplings, or are they not removeable?

Yes, I did exactly that. They are 1/4" male NPT, meaning the compressor manifold has two 1/4" female NPT connections. I replaced them both with high flow fittings which also accept the normal flow quick connect fittings and this was very easy to accomplish. This is a great compressor and I am very happy with how durable it is built & the ability to add on functionality to it.

has anybody used this compressor with a plasma cutter that requires 5-7cfm(90psi) ?

I use it with an Eastwood 40 cutter rated 5-7 CFM at 20-60 PSI and it works fine. I haven't cut for lengthy periods(short cuts only,) the compressor runs a lot but it works. Make sure you get an air drier for your air line.This is a great little compressor, but if you're plasma cutting, you're probably doing other things too so I would put the money to a larger 60-80 gallon 10+ cfm compressor which is much better suited for garage tool use. I use this little compressor for everything though (blowing sprinkler lines, small media blasting cabinet etc.) I'm always amazed at what this little thing can do. But it runs constantly and after I burn it out, I will buy a much larger compressor more suitable for tool use.

Brand	Makita
Voltage	120 Volts
Recommended Uses For Product	Cutting, Grinding, Spraying
Power Source	electric-powered
Noise Level	65 Decibels
Special Feature	Silent Operation
Included Components	2 1/4" Universal Quick Coupler, Male (447013-E), Air Compressor Oil (181122-A)
Item Weight	75 Pounds
Maximum Power	3 Horsepower
Capacity	5.2 Gallons
Color	Factory
Material	Cast Iron
Product Dimensions	29"L x 19.5"W x 19"H
Style	MAC5200 air compressor
Air Flow Capacity	5 Cubic Feet Per Minute
Motor Horsepower	3 Horsepower
Compatible Hose Diameter	0.38 Inches
Model Name	Makita MAC5200 3.0 HP* Big Bore™ Air Compressor
Tank Volume	5.2 Gallons
Maximum Operating Pressure	140 Pound per Square Inch
Manufacturer	Makita
UPC	088381053549
Global Trade Identification Number	00088381053549
Maximum Horsepower	3 Horsepower
Part Number	MAC5200
Item Weight	75 pounds
Item model number	MAC5200
Is Discontinued By Manufacturer	No
Size	One Size
Horsepower	3
Item Package Quantity	1
Special Features	Silent Operation
Batteries Included?	No
Batteries Required?	No
Warranty Description	1 Year Parts & Labor

Makita MAC5200 3.0 HP* Big Bore™ Air Compressor

Details

Description

Specifications

Common Questions