2PCS 70 inch Running Board Emergency Lights 864 LED Strobe Lights | Exterior Red White Flashing Warning Hazard Caution Safety Light Strip for Tow Plow Trucks Construction Vehicles Pickup

Really bright day or night. 3M adhesive is strong on clean surface and wiring was easy to run on a compatible with ram 1500. Lots of flash patterns.

Good very bright and easy to install

I got these originally for one of my trucks, then when I saw how bright they are during the day and night, I knew I had to get another set for my other truck. If you want bright side runner lights and don’t want to pay a high premium price from a manufacturer like Whelen, these are the best lights you can get for the value. They stick right on and will never fall off due to the strong adhesive, and they look amazing. The quality of the lights are amazing for the price of these running board strobes as well thanks to the bright LEDs! Recommend these 100%

product has been on my truck since october of 2025, and it is now april 2026 and lights dont work any longer, they have fallen apart and are full of moisture due to the whole housing cracking. quite dissapointed as they looked great when they worked.

Had these in my truck for a while they seem to be doing great! They r bright. A few different patterns. Use for vehicle transporting on the side of the road sometimes. But nice and bright.

The product arrived quickly and as advertised. The lights were a much needed addition to my patrol truck a 2024 F-150 police responder, from the upfitter this vehicle only had one light visible from the side of the truck, with safety in mind while also on a budget, I selected this product. It is not as bright as the name brand lights such as Fenix, Federal Signal, Whelen etc. but it is bright enough to get the job done, the installation was easy with the peel and stick adhesive that has held up to substantial abuse from my rough treating of vehicles, I opted out of using the supplied brackets as the vehicle does not belong to me and I don’t want to add holes, the adhesive alone is enough just make sure to clean the surface well. My only complaint is the length of the supplied cable, while it reaches the cigarette lighter plug fine if ran through the door, to properly run the wire I would need about 6-8 more foot, though not a big deal in my application as I have removed the cigarette lighter all together now and wired it to a federal signal pf200r remote head unit. These lights have been covered in mud submerged in water, washed multiple times in the Alabama heat as well as below freezing temperatures. I believe these are a must have while operating on a tight budget!

I became skeptical Once getting the strips quality looks pretty cheap. I tried them before installing. Bright, true red and blue and different functions. Small kit to bolt it into place as well. I installed it with the double sided that came with it I didn't use the bolting down kit. The adhesive is actually pretty strong, and perfect location for my vehicle (frontier) ran the wiring, through the firewall and used the 12v, hard wiring wouldn't work, everything was great and many of the officers that I did details with liked the strip over having a couple of blocks on the side. Over all impressed with how bright they are, easy to install, durability over the appearance.

I had previously asked whether these can be cut to size. The answer, without exception, was no. I have added the red/white to my Sequoia luggage rack on the left and right side - the 70" was perfect in length. I added a third to my existing 52" curved white LED light bar. But since the 70" was too long, I had to cut the strip. Since the end with the cables seems to be fused in plastic, I opted to remove the opposite end. I cut the plastic tube without damaging the LED strip. I then pulled the strip out as far as it would go (stretching it), and cut it. This let the strip slide back into the tubing by about 1/2". I then sealed the open tubing with clear caulking. It is important not to allow the tubing/strip to experience any temperature changes while the caulk dries - else it will suck it in (if it gets cooler) or push it out (if it gets hotter). The results are fantastically bright LEDs above the roofline that can be seen from hundreds of yards away. In fact, these were brighter than the mounted emergency light bars I had previously installed - so I removed them. The beauty is that the strips all but vanish against the black luggage rack and light bar - until they're turned on. And with the larger light bars gone, I don't look quite so dorky/obvious. I used standard rubbing alcohol with paper towels to prep the surfaces. The 3M VHB tape on the back of the strips are really stuck on there. The luggage rack is relatively smooth, so I expect them to hold without any further adhesive measures (i.e. zip ties or screws).

Very bright durable. Really gets your attention!!! Standing up to the cold Canadian winter and working great so far!!

When the temperature goes down for low -20 only half of them work. As the days warm up, then they start to work. Some days when they’re cold the flash patterns don’t work.