Stainless Steel Chassis Protect Armor Front Center Rear Skid Plate 5pcs for Traxxas 1/6 XRT Monster Truck 8S #78086-4 - Hollow Version

Definitely looking like it will protect the XRT!! Easy install and all parts fit perfect!!! Great quality protection and would highly recommend!!

Great item easy to install

I bought this product to cover up the bottom of my XRT ultimate which is a $1500 machine and everything fit great except for the front two screws in the back screws that they give you. They are too long and they hit the metal covers so if you have an ultimate or you put your metal covers on, do not use the screws they give you in the front two holes in the back two holes cause they will, hit the covers and push them up. If you have a regular one I assume they will not interfere. I will change those four screws and make them a little shorter to use your stock ones which I did use. They are long enough and they Nice and tight so just be careful when putting it on if you have metal covers

Fits Perfect Looks Great 10/10

Works well although your adding another 1.34 lbs to it but will definitely help prevent bent drive shafts

Missing all the screws and stuff to mount it!!!!!!!! Please send me the mounting hardware contact me

Just installed this on my XRT. The fit is within tolerance, a little tweaking of the side plates was required for a tighter fit. The plastic spacers are a bit of a pain. It would have been nice if they were cut to the correct size rather than needing to stack them but it does the job. Some of the edges are a bit sharp, a fine file takes care of it very quickly. I plan on going bashing this weekend, I'll update my review after seeing how they hold up. Update #1 I've got mixed feelings on these, after 2 sessions of bashing they seemed to be taking the brunt of the hits. Several good gauges in the stainless steel guards showed that they were taking the abuse. It seemed they were doing a good job of protecting the chassis until I took a nose dive into the ground. The front shield dug itself into the ground and bent downward hard enough to pull out the front two mounting screws. In fairness it was a hard hit at full throttle. However I feel that if the shield wasn't there when it hit the front bumper would have flexed and the plastic shield would have survived with little or no damage. I needed to bend the shield back into shape using the bench vice, yeah they're that stiff, a good thing. I replace the front screws with ones 10mm longer. That should help with the pull out problem. Weather has turned cold and it's too dark after work to bash so it may be a couple of weekends till I can update again. I'm gonna leave it at 4 starts for now, more review to come. Update #2 Weather broke, bashed for 2 more batteries. Held up fine, no issues this time. I did make my own 1 piece spacers out of nylon fuel line, much easier to install/remove the pieces now. Took several hard hits with no damage. Over all I think these were a good purchase and will leave them installed. No more updates unless a problem develops. Final review, I recommend installing these skid plates. Update #3 I have now removed these from my XRT. The front skid plate has bent and pulled the front screws out twice more. I had to replace the screws with 5mm ones to avoid buying more parts. The front guard digs into the ground and just rips the front screws out. If your mainly bashing on hard surfaces they might hold up better, but on softer surfaces they just dig in like a plow and rip out the screws. Use at your own risk.

Saved me at least 7 times.. grateful for all the times I said oops and nothing broke.