VEVOR Bottled Water Dispenser Pump System, 5 Gallon Dispensing System, Automatic Electric Water Dispenser, Single Inlet Water Jug Pump, Compatible Use with Coffee/Tea Machine, Refrigerator, Ice Maker

Super value for the money if you goal is to provide easier access to bottled water than a traditional water cooler. This system is simple, pretty easy to install and so far works well. There can be issues with the shut off valves in the bottle wands- if they don’t close completely when the bottle empties the pump may continue to run sucking air. I make sure to periodically knock the bottoms of the wands where the float valves are against the bottle bottoms. Especially when changing to new full water bottles from empties. Special note: like me you may wish to locate the actual five gallon bottles remotely from the pump and output supply line to your faucet or ice maker. If so that’s likely to require that you extend the 1/2” ID line from the pump to the bottles location. The line supplied in the kit is high quality hose that does not impart taste or odor to water passing through it. I found out aftermarket hose from hardware stores may not be the same. Even if advertised as drinking or potable water safe it may add undesirable taste or odor to what comes out your faucet. Especially if it sits in the line more than a few hours. The answer for me has been to buy the hose needed from a marine supply store. Hose that is specifically labeled for potable water. Since most boats use hoses to supply fresh water from storage to faucet this is a common need. And those hoses are expected to be perfect. And so far they have been. It’s worth the extra cost per foot the marine supply (West Marine in my case) charges over what the hardware store charges since you will get the hose you really need. Use the plastic hose barbs also at marine supply to connect your new hose to the hose supplied with this kit. Like the hose they impart no taste. Make sure to clamp them with stainless hose clamps. Even small air leaks will cause your pump to loose prime because of air pockets in the hose.

I love this thing. It's either this or a $2000 RO system. Works great. Yes it makes noise but so do potable water pumps

"I have been using this product for a while now and I am genuinely impressed with the overall experience. From the moment I started using it, I noticed how well-made and reliable it is, which has made a noticeable difference in my daily routine. What I appreciate the most is how intuitive and efficient it is, proving to be exactly the solution I was looking for. It functions exactly as described, and it is clear that a lot of thought went into its design. I honestly don't have any complaints, as it has exceeded my expectations in every way. If you are considering getting one, I would definitely recommend it; it is a solid purchase that I am very happy with.

Bought this to replace an different model that failed after 30 years of use. It works well, is quiet, and easy to install. I have it piped to a water dispenser and into the refrigerator for cold water and ice. It fills a glass or pitcher quickly. I removed one star because the unit stops with still about a pint of water in the jug. Otherwise it is perfect for my use.

I bought this to replace a 12 year old FlowJet 1000. If I didn't know better, this was a Flowjet. The screw hole mountings are identical to the FlowJet. So were the plumbing supply fittings. While the FJ was old, this seems to have more pressure, less pulsing and is a little bit quieter. I live alone. So it is only me using it for water to my ice maker and water in the door to my fridge. For 18 months, it served me well. I changed the tank as I normally do and came back about an hour later to hear it running. Only this time, it didn't turn off as it had lost its prime and was unable to activate the pressure switch. I did a few things like hold the 5 gallon jug of water above it and turning the jug on its side to force water down the tubing. Nothing worked, so I primed it using the tap water and forcing water into the line. Problem solved, correct? Nope. The next AM there was a puddle of water on the floor. The pump had developed a leak. I took it apart thinking it was a clamp or something. Nope. The casing of the pump literally cracked on its own. And now I know why. Nothing inside the pump casing is secured. The pump is held in place by two pieces of foam that compress when it is put in the case. The pressure relay was hot glued on one of two connectors and that had failed. A wiring harness also had hot glue to hold it in place. The interior detailing of this is absolutely sad and was built to the cheapest possible standards. No wonder it broke. It vibrated the pad out of the way and was rubbing against the case. So more cheap stuff from China that will eventually break on you. In any case, I cleaned the pump housing and used some waterproof epoxy to seal the housing. I don't expect it to last very long so I ordered a different brand as a replacement. I can't seem to add any photos to this, but the construction with hot glue is really sad.

Quiet. Allows my spare frig to have ice. Husband thought I was crazy but he is enjoying having 2 ice makers in the house

Should have bought years ago. Excellent product

works great. much quieter than the last one!

Después de 2 semanas de instalación funciona perfectamente y lo use para alimentar un refrigerarador .con dispensador de agua y hielo . Ya que la toma de agua está a unos 3 metros y tendría que agujerear y ranurar paredes y opte por rapido y sin ensuciar

Está ótima!!! Sencilla de instalación, no hace ruido

Excelente producto tiene todo fácil de instalar sin falla buen precio y muy buena recomendacion

me gustó la presión y volumen de agua que saca la bomba, pero es más ruidosa de lo que esperaba, ojalá el fabricante pueda sacar una nueva versión más silenciosa.

Perfecto, aunque lleva poco instalado, espero que dure bastante pero hasta ahora muy bien