DYLON Washing Machine Fabric Dye Pod for Clothes & Soft Furnishings, 350g – Intense Black

I was really impressed with Dylon Intense Black. It’s a fantastic way to bring tired, faded clothes back to life without having to replace them. The colour comes out deep, rich and bold, giving garments a fresh “like new” look when used on suitable fabrics. The best thing about this dye is how simple it is to use. The machine dye version is especially convenient. Just add it to the washing machine, follow the instructions, and the process is almost effortless. I used it to revive black jeans that had started looking washed out, and the difference was amazing. The fabric looked darker, fresher and much more expensive afterwards. The finish is a strong, intense black rather than a dull grey, and it’s a great option for refreshing jeans. I'm going to purchase again, but this time add 3 pairs of jeans for the darkness I require. A small tip: make sure you check the material of your item first, as synthetic fibres may not take the colour as strongly as natural fabrics. Also, it’s worth running an extra wash afterwards to remove any leftover dye.

Really good dye. Worked well. I dyed a pair of jersey trousers, a tee shirt, a pair of shorts and a small dress. The colour ended up a lovely Royal Navy , which I knew would happen (intentionally) as I put slightly more weight in. Even dye. Would recommend.

I remember the days of boiling up our dyes with tons of salt so this has impressed me greatly for the ease of use. I took care with the instructions. I checked the wash cycle. I was dying 100% cotton bedding (to de-grey the house). It worked really well and the green took nicely over tones of pale grey - you could just still see the pattern through but I rather liked that. However, results are variable - the next things I dyed were also 100 cotton, but the colour took quite differently. I then pushed my luck and dyed a pair of curtains from the same range (also 100% cotton). Worried that they would come out different shades if I did them separately as the other items had done, I was keen to wash both together, but even though I used 3 packs for that attempt I pushed my luck on the amount of fabric in the machine and it came out uneven (streaks of darker tones across where the fabric must not have unfolded in the machine). I did pause the machine part way through and moved the fabric by hand to try to mitigate this - achieving nothing but a green hand lol. I'm not too unhappy with results - it's made an inexpensive change to my bedroom colour theme, but not one thing matches even though I used the same dye, and when the curtains are closed the uneven streaks show, so if you're determined to have everything the same shade this may not be the way to go for you. So - overall, fabulous, especially for single items. But not without issues to be mindful of if you're shade matching, which may be a big deal for some people.

I bought this 'Espresso Brown' dye with the intention of dying two old cotton throws, each of which was approx 1.2m square, and which had previously been dyed bright orange several years ago. The total dry weight of fabric was about 1.6kg, which is greater than the maximum weight stated for one pod of dye, but all I wanted to do was to tone down the existing colour. I had expected that I might end up with a sort of terracotta shade, but wasn't really too concerned about the end result, so figured that it was worth a punt using a single dye pod. I gave the throws a quick pre-wash to leave them damp and then followed the pack instructions, emptying the contents straight into the machine drum as indicated for larger quantities of fabric, and putting it through two full cotton cycles, with detergent added in the second cycle. The end result is an even coverage, and the shade is a rich 'chocolate' brown, not much lighter than the shade indicated by the manufacturer, which was surprising given the excess weight of fabric I was using. There was no staining left behind in the machine or on the door seals, despite the alarmingly dark colour during the process. All in all the product was easy to use and produced better results than I expected. My only criticism is that the instructions are printed on a long narrow strip of paper in tiny letters less than 1mm high, and are in white on a black background, which makes it very difficult to read. My eyesight is fine for reading most things, but even with reading glasses on I also needed a magnifying glass to read the instructions properly.

Great quality. Easy to use and did a good job

Reading some of the more negative reviews, I thought this new approach of chucking in the dye within a container would be problematic. Not so! All in one product (no more kilos of salt to buy) & no more emptying out of the dye into the drum - nice and straightforward with less room for accidents. I've been using Dylon's range of dyes for a few years now and this latest format makes it even more simple than the previous all-in-one pouch. To improve your chances of a consistent result, follow the instructions but be aware dirt or soap residues are the enemies to the dyeing process. So I ensure the wash before dyeing is a thorough one, with no fabric conditioner. You could try using distilled white vinegar as a conditioner replacement (useful when you've run out or for towels that you need to stay absorbent), because it helps by neutralising any remaining soap. Choose the highest spin setting your machine offers to get rid of all of those residues. Then, clean out the detergent/conditioner drawer and run another rinse cycle with just water, selecting the option for 'water plus' if your machine has the function to boost the amount of water used in the rinse process. The aim is to make sure there's nothing but clean detergent free fabric. Place the Dylon pod on top of the freshly-washed well-rinsed damp fabrics and follow the remaining instructions for the experience you've been dyeing to see. 4 wash cycles (cleaning, dyeing, after dye wash, machine clean-out wash) per batch of clothes is a bit energy intensive, so you might want to wait until you've got enough items to rejuvenate or for when it coincides with your scheduled machine maintenance wash and run a limescale treatment during the final clean-out wash killing two birds with one stone, to justify the 'leccy costs. But, it's better than looking scruffy or throwing out garments and your machine will most certainly be free of germs after the whole process. Several cups of tea later... results were uniform colour throughout. I chose the Navy Blue option (the product picture shot isn't that accurate in the colour shade - it appears online as a denim blue). Results were a nice and deep uniform blue to several items all done at the same time (3 pairs of partially faded navy trousers, 2 casual navy shirts that looked a little tatty and a light blue t-shirt). One dye pod was enough to refresh all the garments to look crisp and close to new again without looking artificially over coloured. I was a little apprehensive worried I'd get blotchy results claimed by other reviewers, but following the instructions which state to run on a 40 degrees cotton cycle, the results were as good as Dylon's previous generation all-in-one pouch, minus any dyed fingers. Trust me, the dye powder can get everywhere if it's mishandled, the pod just makes it all nice and simples.

I’ve used this many times over the years and always been really pleased. I’ve only ever used black. Recently I used the black one for 3 items and they turned out great. I don’t know what happened this time as the clothes are patchy. All items were cotton just needing a refresh. I used the navy blue. I don’t know if I did something different but you can’t really go wrong. I’ll try again.

I was looking to recolor some stuff that was looking pretty color worn, so i decided to try the Dylon Grey washing machine pod. You get enough dye for 600g, that is essentially one pair of trousers and one shirt, or say a few smaller items. I picked the grey, because it was the closest color to my faded trousers that I could get. Preperation is fairly simple, you wash the clothes first (unless they require a pre dye solution), then add the dylon pod to the wash. Select cotton 40 degrees and let the pod wash the clothing. Once that is done, depending on washing machine time, you will need to then rewash the clothes again in normal detergent. Hang up to dry, do not use a tumble dryer for this process. You then need to wash the machine again empty, to make sure you have removed any remaining dye. There are many variables to a successful dye wash, one being the material is suitable for the dye, the color. The wash time for the machine can vary considerably for a full forty degree wash, can take as long as three hours. It is not recommended you use any eco wash load cycles either. I had a successful outcome, both clothes (trousers and hoodie), (which had color worn wear marks), looked better and should last a few more months longer. I was impressed at the results on these fabrics. There was no color patchiness I just let the clothes dry naturally. The pods are reasonably priced and very good value if you want to try and save a piece of clothing that is materially dull or lost some of its color. Something to consider however: The amount of time needed in the washing machine for a forty degree wash for the dye pod can be as long as 3-4 hours in wash cycles. This does not include at least two more hours for pre-wash of clothing before use and then another post wash to clean the machine after use. This time will vary between machines though, so maybe slightly longer or shorter depending on the make and model of machine you own. Pros: Easy to use, comes in a range of dye colors, comprehensive instructions. Cons: Does not work on synthetics, must be 40 degree wash and may require a pre dye wash pod too.

Dyed 5 pairs of navy chinos as they were starting to fade, easy to do, no mess. Came out as good as new.

غاليه ومبتعملش حاجه عن تجربه انصح بسبغه اليد افضل

El dylon de siempre! una maravilla !!

Wie immer perfekt

I died two canvas Ikea chair covers purple with Ritt dye years ago. They had faded to an ugly grey purple. I wanted to re-dye them but dreaded the pot on stove, add salt, mess. Saw these pods online and wanted to try them. I used one pod per chair cover. I dyed each chair cover separately (in part bc I ordered one pod to try and only ordered another when it worked). I was afraid it wouldn't work because I have a front loader. But when you read the directions, these pods are from the UK and designed for front loaders. It was so easy. Just follow the directions and run an empty cycle after to make sure your washer is clean. Very happy with results.