PERLESMITH Floating Wall Mounted Shelf AV Mount Shelf - Holds up to 16.5lbs - DVD DVR Component Shelf with Strengthened Tempered Glass - Perfect for DVD Players, TV Box and Cable Box, PSDSK3

Very nice unit with easy to follow instructions. A level, PH#3 Phillips driver, and the included Hex (Allan) wrench make assembly ways, but you’ll want a stud finder or keen ear to hang on a frame wall. The vertical frame is made of aluminum channel, is machined well, and offers both clean and secure figment of the clevis mount styled steel shelf arms. Included are soft translucent rubber pads for the tempered glass to sit on rather than the powder coated steel. Also, the tempered glass is secured to each shelf arm with a provided machine screw. One thing to note; the instructions show the installation of the shelf arms prior to the application of the glamour caps for the mounting hardware...be sure to install the caps FIRST should wish to not move/remove the shelf arms to install them. The cable management system is plastic and easily trimmed to provide space for thick or more heavily insulated wires like HDMI or RGB/Red Yellow component cables. The cable management does not allow for top or bottom exit, but rather entry/exit through either side along the length of the vertical aluminum frame as you see fit, something to keep in mind for those of us so OCD we turn the toilet paper roll around in other peoples homes or constantly adjust how the salt and pepper shakers sit on the table. For myself I purchased a separate cable track system which is both low profile and paintable which I’ll nest tightly against the yet-to-be-installed baseboard and wall trim. While made in China, this product was a worthwhile purchase made to a respectable level of quality which suits my needs. Being both utilitarian and aesthetically pleasing works for me and I’ve no regrets with the results.

Its so sturdy we got winged wall archors. Perfect to put up our gaming stuff and others away from our toddler

We ordered these shelves for use in our exercise area. We wanted to clear up some floor space by mounting the tv's to the wall and have a couple shelves under them to hold the dvd players and other devices. These worked out perfectly. Even though we attached them to a concrete wall, these were still super easy to put together and install. My only complaints are as follows: - The glass shelves only have one screw in them...they feel slightly wobbly, but I think they will be fine. - The shelves aren't super deep so by the time you get the chords into the back of your dvd play or xbox or whatever device you are using, the device sticks out past the front of the shelf. Just make sure you measure your device with chords beforehand to make sure the shelf depth of 11 in's will work for you. All in all, I think these are a great price for what you get. Worked perfectly for what we were needing.

This was an affordable wall shelf which looks nice and saves space. Install was relatively easy and is great to put books on, DVD's, game console, etc. My only gripe about this product is that it FEELS so fragile and that if you're not careful it may break. It hasn't broken, but I'm very very careful when I have to dust it (because it's a black glass, dust collects and is easily visible). While it's held up so far, I'm worried about how sturdy it is. I could be overthinking it and it may be more durable than I think, but the glass tends to wobble a little side to side even when it's securely tightened. Looks sharp nonetheless.

The product arrived with enough options to install this shelf onto ANY wall: Sheet rock, Wood and Cement! That was impressive and unexpected. The instructions were fairly easy to follow; everything wasn't 100% spelled out, but easy enough to figure out. The quality was nicer than expected for the price; the shelves are heavy and sturdy. As pictured, it came with an HDMI cord; a nice plus. The only, sort of negative thing for me, is that I wish the actual wall mount were longer and/or made in such a way to better hide the electrical cords. Since it's capped off at the top and bottom, to hold the very "tracks" that are meant to hold the cords in place, you have to run the cords in from the sides, instead of directly through the top and out the bottom. (Hard to explain - Please See pics) With that in mind, it's hard to call this a "floating wall" if all the cords are sticking out. But not a deal breaker, since I really needed a shelf for the cable box and other electronics that didn't take up any floor space. I would still recommend this product!

It's great for getting your dvd\bluray player and gaming consoles up and out of the way, makes it easier to hide the cords as well. The shelves are easily adjustable to help fit what you need to go on it. Assembly and mounting isn't to bad. It could be sturdier, make sure you balance the weight of the items on the shelves.

I bought this shelving unit because one of my electronics units requires direct line of site with my remote and I liked the idea of having my equipment off the floor. I was fortunate enough to find a wall stud in a convenient place for the shelving bracket that supports the shelving hardware. You can use the provided drywall sockets but I wouldn't put a tremendous amount of weight on those (think old electronics amplifiers). The design concept behind this is great, but I found the shelves to wobble side to side without much pressure applied to either side of the shelf. This isn't bad if your electronics have a center of gravity that aligns with the support bar, but in my case they did not. So when I set my receiver/amplifier on the glass shelf it leaned to the right because it was heavier on the right. I tried tightening the clamp screws to no avail. I’m going to have to add an L bracket on the right side under the shelf to keep it level. This wobbling issue appears to be caused by not enough pressure force on the bar/shelf interface clamp. Two Philips head screws are used to hold the clamp in place but the moment of force on either side of the shelf is too much for the two screws to handle and the shelf easily lists from side to side. Thicker hex head screws would improve this but I’m not sure it would solve the listing reasonably. The other issue I had was the shelf depth. A couple more inches would have been nice, but I’m making due. I had to replace my straight HDMI and coax connectors with right angle connectors so that the equipment would seat far enough back. Not a big deal, just something to consider since the whole point of this for me was to get a cleaner look.

Comodidad

Easy to install. Solid construction.

Das Regal macht einen wertigen Eindruck und sieht sehr gut aus. Der Originalpreis ist allerdings sehr hoch. Im Warenhouse war das ein guter Preis.

Buena calidad para el precio. Fácil de instalar. Sólo tengan en cuenta que si le ponen una consola vieja y ruidosa, el ruido y la vibración se transfieren a la pared y es muy notorio y molesto. Lo solucioné poniendo un trapo entre la consola y el cristal del soporte.

Me gustó pero lo malo es que los cristales son chicos me gustaría más si fueran más grandes

Súper práctico