Ring Snuggies - The Original Ring Adjusters - Assorted Sizes

We bought these for my husband's ring because we accidentally ordered it too big. Unfortunately we can't get it resized locally without voiding the lifetime warranty and I am hesitant about mailing it back, so our solution was a ring snuggie! The package can with a variety of sizes, as shown in the picture, so we were able to easily find the perfect one for his ring and we had extras in case I needed to use one too! The snuggies are durable and do well in water (like when you wash your hands), although they can sometimes hold water but my husband just takes it off for a moment and shakes it. They are clear so they are easy to hide if you don't want them to be visible. I was worried about it being uncomfortable but my husband says he has no problem with it and I tried one and also didn't notice any discomfort or anything similar. All in all they were a life saver because his ring no longer slides of his finger dangerously while we are traveling, instead it stays snugly right where it belongs. ' I would like to note that they can get dirty and be hard to clean or if you drop one it can be hard to find it after, but I still love these products.

If I had read many of the prior reviews, I might not have purchased this product. I read a few reviews, purchased the product and my experience has been great!! In fact, I reordered several extra packages in case they become unavailable. My ring size and finger situation might be a bit different than some though. For me, I need a larger size ring to fit over my KNUCKLES but once the ring slides over the knuckle, it’s generally too BIG. This is especially true for any ring that is not a band style ring. The result is that rings that are not band rings SLIDE all over the place (including to the palm at times) and generally drive me crazy. Sizing the ring down would not work because I wouldn’t be able to get the ring over my knuckles (or get it off without tearing up my skin). I used to get two small gold or silver balls welded to the bottom of my rings by my jeweler to minimize the sliding. However, this cannot be done on rings that are plated, such as silver rings plated in rhodium (which minimizes tarnish and gives a more “platinum” appearance.) A couple of my gold rings also have a finish that prohibits this solution as well. Finally, my collection of rings has expanded into the hundreds and it’s cost prohibitive to have all the rings which qualify for the “ball” treatment modified. Plus, I get better results with the Ring Snuggies with less sliding. These probably work for me because they are put on AFTER the ring is in place. There are basically two options; a very minimal round shaped plastic band placed over the ring bottom or a larger plastic piece which slides under and then over the bottom of the ring band. Both work well. I find the larger plastic piece easier to put on and use it more often. However, because of its design the smaller attachment has a smaller “footprint.” The downside to the product is that I have a clear plastic attachment on the inside of my rings (on the palm side) which is more apparent with larger attachment than the smaller. Also, it complicates hand washing. Neither of these are a dealbreaker for me though. I almost never show people the palms of my hands and even handholding is relatively unchanged with the smaller attachment. Since I wear sunscreen on my hands while out during the day, I’m used to minimizing the things I touch and use hand sanitizer strategically (so I don’t wash the sunscreen off the outer sun exposed portion of my hands). If you’re someone who frequently needs to scrub your hands with soap and water, I don’t think this product would be the best for you. I also do not find the Ring Snuggies uncomfortable as many other reviewers seem to. This is probably because the part of my finger where the ring sits is 1/4 to 1/2 the size I must purchase to get the ring over my knuckles. I’ve gotten used to wearing them and don’t really notice them much while wearing. Best of all, no more SLIDING!!!

I needed to fit 3 bands; wedding set and anniversary band. Not easy! Sizing at the jewelry store would have been $130, too much for now. There is one snuggie in this pack that fits all 3 bands, but it was so tight and big, I couldn't tolerate it. My husband "lopped" about 1/16" off of the length and filed the thickness of the snuggie down. I put it on all three bands, with the slit facing out. Now it's perfect, comfortable, stays in place, and keeps my anniversary band perfectly aligned with my wedding set bands. I priced a similar pkg at a local Claire's. Not as many in the pkg and it was $7.95 - way overpriced. Even with the modification, this was our best option. I ordered two more packs. My husband will modify the other two of the size I needed so I'll have backups if needed. There are several sizes to choose from in the pack. Some of the other ones would have worked. I wore one for a few days just on my wedding set. I didn't like it, but it did keep all 3 rings on my finger, which is the ultimate goal. It did pop off of my finger once, a little scary! I would certainly not trust them enough to go digging around at the beach, or ride some waves, but for ordinary things once modified, they should be just fine. I hope they will make these a bit "thinner" in the future. Our modified version is a 4 star. :-) 2014 - For questions on what to use to file down the plastic - use a grinding tool, like a dremel tool. My original one is still on my finger, working just fine and comfortable. Backup still in my drawer for when I might need it.

I gave these 2 stars because they are not expensive and they work ... sort of. What I didn't like about them was they scratched my hand every time I washed my hands (I'm a cook, so I wash my hands a lot). Also, they worked for a day or two ... sort of. My ring never swung around till it was completely upside down, but the diamond did rest on my other finger - which wasn't very comfortable. I tried two "Snuggies" and after a couple of days they both popped off, never to be found again. I really wouldn't recommend these even though they aren't very expensive. It's still money down the drain.

My wife and I went with wide, tungsten carbide bands for our wedding bands. I tried on a tungsten carbide ring at the jeweler to get an idea of my ring size (~7-7.5) and ended up ripping skin off of my knuckle when I tried to remove the ring. So instead I ordered a 7.5 size band. When I got it it ended up slipping off my knuckles on most colder days and hoola-hooping around my much narrower finger. Being formerly of the mechanic trade, I have knuckles that are rather much larger than the rest of my fingers and so although the 7.5 fits snugly around my knuckle, there were days when it would simply slip off and the rest of the time was very loose and uncomfortable to wear. I don't know if you've ever tried to find a "metal" alternative for a tungsten carbide ring sizer, but if you have or are looking, I wish you the best of luck because you're not likely to find one either on Amazon or anywhere else. Which made the "ring snuggies" and similar "cheap, pvc tubing" ring adjusters pretty much my only option. I got these today in the mail and I have to say that I am absolutely loving them! I had to use the largest size in the package and it doesn't fit squarely around my ring but I think that might, in its own way, be better. I flipped the snuggie once it was on my ring so that the round, uncut side of the pvc tubing faces my finger and there is absolutely no discomfort to wearing it and it fixes the annoying "looseness" of my ring previously. I can now wear my ring with the confidence that it won't fly off my finger if I flick my hand too hard. I would highly recommend these if you have a band that is made out of an alternative/rare metal and or a very wide band as the selection of metal resizers seems to be limited for people with similar rings.

It’s works great holding my ring in place.

Ring Snuggies ~ Ring Sizer / Assorted Sizes Adjuster Set of Six Per Pack and B0014DGXU8, Original Ring Adjusters which comes in different sizes per pack. I bought these from Amazon, as well as 'yellow gold' metal ring adjusters last November. It was very cold inside the supermarket last fall; I lost another ring three times because my fingers shrank, but did nothing about trying these until last night when, with the advent of premature Spring (so far,) my thick ring began twisting on me. The assortment offers these plastic findings in round shapes, with a round i.d. and o.d. as well as the one(s) I have tried, which are more elliptical than round. The shape on the inside of each is also elliptical. At first, my eyes being what they are, I only saw the larger of two, and tried it, but after a night of being too conscious of it when I awoke to turn over, I checked the card contents, and found the smaller one. My ring finger knuckle has always been large, but I had no difficulty installing the finding on the ring after I was already wearing it. And voila! it feels so much better that I plan on not being aware of it at all. I have several rings, bought from the Q before the economy hit the fan (which means I bought my jewelry "right,") and no doubt will require more of these for them. It was always difficult for me to order the correct size for the intended finger. My late father was in the business, and I have a sizer in a box somewhere, but check out this department; Amazon has a tiny tape measure just for measuring fingers. (I have a man's hand, and cannot wear women's gloves, but small to medium men's gloves do the trick.) I do wonder if the plastic wears out after some time. I will not be purposefully sleeping with those other rings, but even with regular every-day use. . . Will I need to order more today to account for planned obsolescence later? (For the uninitiated, the word "findings" means something to those in the trade. Small pieces like these, pierced earring attachments, chain extenders, clasps, et.al. are known by that term.) Thanks, Amazon, for the RINGie dingies.

I ordered these "snuggies" because my engagement ring is a little loose, and while me fiancee says I should get it sized, I am hesitant to do something permanent to the ring until I at least see how it stays on with a properly sized wedding band also on the finger. I remember seeing a product like this in catalogs when I was younger, and a quick search found this product. It is very economical and I can't complain about shipping - they arrived in just a few days. I am disappointed more in the material and size - though these are supposed to be "assorted sizes," only the center hole to fit the actual ring is different in size. The diameter of all of the pieces is about equal. They are also on the thick side - I did manage to get one on my finger and my ring is definitely not going anywhere now, but it's a little uncomfortably tight. Now, if you have a big heavy fashion ring (I have a few Fossil rings that I could only find in size 7 and are huge on me), this are a great solution. Paying a jeweler to size a $30 ring would be crazy, and they are big enough that the snuggies are practically unnoticeable on my finger. I would only recommend these if your ring is at least a full size too big.

No es tan útil como esperaba porque no se adapta a todos los anillos, y se sale a menudo sobre todo los redondos

The best I have found but very expensive for 6 plastic pieces - not a good range of sizes … some are too long which you can cut.

Very useful

Tienes varias opciones y probé todas hasta que encontré la más adecuada para mí y funcióna de maravilla

ganz toll sind die verschiedenen Größen. nur leider ist das Material sehr steif so das es sich nicht an die Rundung anpasst. Es macht den Ring dadurch SEEEEHR viel kleiner