OFFICENTER Compatible Printer Cleaning Kit, Printhead Cleaning Kit for Epson, HP, Canon Inkjet Printers - 100ml

I watched a YouTube video about how to clean the print heads on my Canon 3260 tank printer, then I bought this kit. The cleaning went so-so, but this kit worked great. Pros: Tubing fits snugly on the syringe tip, there’s plenty of cleaning solution to do multiple cleanings of all of the nozzles on the print heads, and the cleaning was a success. Cons: The kit didn’t fix my print issue, but I don’t think my problem is with the kit. The problem I seem to have is getting the ink back into the system properly after cleaning. I did a printer deep clean, then an ink flush, and still the prints are more streaky than before I used the kit. I may end up buying new print heads anyway. EDIT: After running two more deep cleaning cycles on the printer, I was FINALLY able to get the ink flowing properly again, and my prints were PERFECT. So this kit 100% solved the clogging and cleaned the print heads. You just might need to run 4+ cleaning cycles afterwards, to get the ink flowing properly.

I only needed the syringe, the tube, and the solvent. I pushed about 10ml of the solvent through my totally clogged cyan print head (into a paper towel below), then ran the printer's head cleaning and nozzle check 3 times, and my printer was back to working perfectly.

After using off brand ink, my printer began producing poor quality copies. Some copies were so bad they could be read. Then the ink clogged the printer heads & nothing would print. Used this twice to clean the machine, went back to the name brand ink, & life is good again. Wear gloves & make sure to have plenty of paper towels on hand. Watch the YouTube video - removing the ink carriage wasn't necessary - and follow the directions in the video. PLEASE unplug the printer before doing any work.

The hose on the product didn’t quite fit, but I was able to get it to work eventually had some difficulty with it

Was given my first (used) Epson Eco Tank. Apparently the original owner didn’t treat it kindly and it required a little wrench on it. Once I got the mechanical part situated, I needed to address the clogged printer head. This solution did the trick, and the printer works like new! Whatever the solution is, it worked like a charm! It was nice that included was a pair of gloves that came in super handy and all the necessary adapters and tubing. It’s a complete kit.

It worked for what I needed but the instructions were poor and I had to figure out my own way to use it.

I have an Epson WF-7520, and the black ink was clogged. I ran through countless cycles of the on board cleaning and then resulted to using this product. I would have imagined the product was able to clear ink better, but just didn’t to the job. I would apply soooo much force that the liquid would leak through the sides. This made me throw away my printer after disassembling it to try to lessen the water damage. If your printer is clogged, this is a last resort situation and it may or may not work. I’ll be looking for a new printer this upcoming week.

Used it to repair my Epson Ecotank 3760 very easy to use along with YouTube videos