LANSCOERY Acrylic Display Case for Collectibles, 5-Tier LED Light, Wood

Disappointingly, of the two units I purchased, one arrived with an acrylic panel that was cracked, as if something heavy had been dropped point first onto the box. Since the damaged piece was the back panel, however, I decided that it didn't matter, and assembled my units anyway. I bought two of the 15 inch long units, planning on stacking them on top of each other. After I assembled them, I realized that I could remove the bottom board from the top unit and make them into a single, two storied unit, which worked beautifully. I highly recommend doing this if you plan on using more than one unit together. It's classy and secure! Now, first off, several people have left reviews stating that the holes in the wooden parts for the acrylic sheet tabs were too small, requiring them to widen them. I think that they failed to understand that the tightness of those holes is *intentional*. You don't want the tabs to drop in easily and rattle around. The tight fit keeps the unit more stable and secure. And it isn't difficult to get the tabs into those holes, even thought I did NOT receive the mallet that is shown in both listing and in the parts list that comes with the display case. The heel of my hand was plenty enough force to tap the pieces together, and as long as you are paying attention, and line things up so that you are only ever applying direct *downward* force without any angle to it, you really run no risk at all of "snapping off the tabs" like other people have complained. Seriously, the hardest part about this assembly was removing all of the film from all of the acrylic pieces before assembly! And they supply a tool to even help you do that! Fully assembled, the swinging doors were a little tight to close, needing me to flex the plexi a little to get them secured, but, honestly, that isn't really a complaint. That tightness keeps the doors from swinging open on their own, so I like it. My only *real* complaint is that the acrylic/plexi used is a little... soft. When loading up your case, don't let your items rub against them, because if they are made out of anything that is stronger, they will scratch the acrylic. A slightly higher quality plexi would fix that, but I think that would affect the price-point too much. The only things I would change at all about these units is that I wish the LEDs were COOL white, rather than warm, and I'll be looking into swapping them out, and I wish that for the swinging door types, that there was a hole drilled on BOTH sides so that I could choose which way the doors swing open. IF I end up completely re-doing all of the lighting in this unit, then that's a simple thing to do, by just flipping the wooden top and bottom around. That only works, though, if you don't plan on using the integrated lighting, otherwise, you're stuck with the hinge being on the left and opening from right to left. Overall, given the tightness of the fit of all the pieces when properly assembled, this unit is MUCH more sturdy and stable than I anticipated, and looks very nice. All of the included tools to help you with assembly - from white gloves, to film removal tool, to even a microfiber cleaning cloth! - really show the attention to detail for such an inexpensive piece. And the risers are better than shown in the videos, too, with extra cross-braces to make sure that your shelves don't sag! If you are on the fence about trying one of these out, then I recommend you give them a shot. They come in such a great variety of sizes, and are easy to assemble and look very nice, whether you're displaying toys, fine art, or anything in between.

We ordered this display case for my son’s girl friend as she has a nice collection of figurines she needed a way to display and keep dust at bay. The case is simple in design but elegant. The interior lighting adds to the elegance. Compact and easily sits on her desk. Unfortunately the case arrived with a couple of the acrylic panels cracked. I contacted the seller and they quickly replied to manage the complaint. That was very encouraging to know the seller backed their product. It was not clear if the damage was caused by shipping or other. Regardless, since Amazon has a gracious return policy, we returned the item and re ordered a new one which arrived in flawless condition. Two takeaways, seller is upstanding so feel comfortable with placing orders with them! Amazons return policy encourages buying with confidence!

Decent Display. I should have ordered the XL. My bad for thinking 3 tier had 3 steps. They consider 3 tiers to be the floor plus 2 steps. I needed more room but it’s put together already so I’ll keep it. Installation was easy, it was the protective film that was a little stubborn to get off. Once it was off, the windows are nice & clear. It comes with gloves and a cloth so you don’t get fingerprints on it. And the light changes to several colors and modes.

I like this display case. I would recommend unless, of course, you have something heavy to display. This is my crystal set, once I placed it in the case i made the mistake of trying to slide it across the table and 1 of sides popped out. Easy enough fix but that is the only issue I had with. If you need something to display and don’t wanna spend a lot of money 💰 this is for you❤️

These were a bit difficult to put together but looked good once assembled and I was willing to look past this. However, after two months the top popped off and the connector piece cracked. This happened to both boxes. Highly recommend you look for a different product.

Looks great. The hardest part of putting it together was getting the plastic off all the pieces.

Assembly process was okay I guess. Love how it looks! The light is great. I wouldn’t say it’s durable. It scratches easily and sometimes you have to get the hammer out again because it comes undone. Light cord falls out easily. Overall, it looks nice and it works, but it’s nothing great, yk?

If you’re at all crafty this is not hard to put together. I actually found that they had included some weird roll of red tape and I use that to pull the lining from the acrylic which worked perfectly and wasn’t difficult. You really need to do this on a hard flat surface and I decided to use some E 6000 to make sure that it wasn’t going to ever come apart I was able to get it together in like 10-15 minutes and left it cure overnight. The hardest part was probably the steps but again not rocket science and once the whole things together it’s a perfect unit for display and it happens to fit like a glove into the IKEA shelves that are the squares. (I don’t know what they’re called because I got mine used) I don’t know about the light because I haven’t got that working yet but I’m sure I will! The light cover dips a little bit in the middle I’m not sure why or if that by design overall I wish these things are a little cheaper because I’d buy a bunch of them! *update: I got an extender for the light and it also works great if I could just figure out how to get it to lay flat very nice addition to the unit

Good

This is an awesome product. Good price, fast shipping. Great packaging quality. Easy to assembly. Also came with white glove and little hammer. Extra light aloso include. Light and look WOW. Best human service. I highly recommand ;)

It is pretty and it displays beautifully but please put it together where you want it displayed. I put this together then tried to transfer it to where I would display it and it broke. Very delicate plastic that doesn't stay together well. Love the light in the top, though, and the fairy lights it came with.

Bought this so I can put my funko pops in a display case. Pieces for inside the case were missing, so I had to send it back. If the product was like the description the price would have been perfect.

Excelente para mostrar algún producto comercial o incluso guardar algunos juguetes de colección que tengas, aunque la verdad pensé que era un poco más grande. Si me toma por sorpresa que fue bastante chico. Pero aún así se mira de muy buena calidad y la luz alumbra bastante bien