REDTIGER F7N Dash Cam Hardwire Kit USB C Port, Dashboard Camera Car Charger Cable Kit 12V- 24V to 5V w/Fuse Kit, Low Voltage Protection for Dash Cam Double-4 Fuses

This Dashcam Hardware(HW) kit has a USB-C connector and worked with my Redtiger F7N Touch. One BIG plus is that the dashcam starts up much quicker. With the standard ACC adapter, the F7N takes an excruciating 21 seconds to start recording. I can be well on the road by then. With the HW kit, the dashcam switches from parking mode to recording in a second or two. It also displays the voltage of the battery and the cutoff voltage. I stuck it to my dash so I can see these voltages easily, but you can easily put it near your fuse box if you want it out of sight. The kit comes with a bunch of 'Fuse Taps' so you can find B+ and ACC power. I had to use a voltmeter to find the active side of the fuse after removing the fuse because the power side was not always on the 'top.' I cracked the case open and I did not see any red-flags with the the electronics - it looks well built. Below are the connections from the Regulator to the USB-C pins. This is important because the dashcam needs to get constant power for its time-lapse parking monitor mode and needs to know when the car is started (ACC goes active) to start live recording, and these signals need to be on the correct pins. Below are the connections from the HW kit wires to the USB-C conector. Red Tiger HW kit USB-C Pinout Black wire: USB-C pins B1,B12 A1,A12 (All GND pins) Yellow wire: Battery+ USB-C pins A4,A9 & B4,B9 (All VBUS pins) Red wire: Switched Acc USB-C pins A5,A8 & B5,B8 (cc1,sbu1,cc2,sbu2) The F7N seems satisfied with receiving the ACC signal on just the cc1/cc2 pins, and this seems to be a dashcam 'standard' if you can call it that. This was verified by using a generic HW kit that did not have connections to sbu1, sbu2. The battery protection cutoff voltage is adjustable with 3 cutoff voltage choices and a digital voltage display, which can be nice to monitor your battery condition. The only issue I have with this HW kit is that sometimes the display does not light up, making me think it is not working. When I start the car, my dashcam starts up but the display does not illuminate with ACC. If I move the voltage cutoff switch, then the display lights up, displays the new cutoff voltage, then it displays ACC. So a minor 'glitch' in the display, but overall it seems to work.

Fairly basic to use, and install. Bought this to provide power to the very nice REDTIGER T700 Rear View Mirror Camera model. Installed it in Sprinter van (2020) by tapping fuse panel beneath passenger footwell. Ran cable up behind panel to right of passenger footwell, positioning the voltage limit sensor box behind this panel, close to the top just below the dash, then continued USB portion of cable up behind the A pillar, making sure not to interfere with air bags, then fished usb wire though small cavity above top of the windshield and out plastic housing at rear view mirror finally to the T700 dash cam, with about 2 inches of wire to spare. This kit has a small in-line "voltage limit sensor box" which can be set by a switch for 12.4, 12.0, or 11.6 volts which, if unit senses power drop below any of these three levels, it will discontinue power to the T700 thereby saving you from running down the car battery if car sits for long periods. The T700 does have feature to record when away from vehicle for security reasons and will continue record until this power kit senses battery voltage falls below the set value, shutting the RedTiger Dash cam down until it gets full voltage again when vehicle is restarted.

Perfect for WolfBox Tripro dash cam camera mirror for 3rd gen Tacoma. Exactly what I needed to hard wire it to the fuses under the dash. Easy, great piece of kit here!!! Low voltage cut off offers me peace of mind (the wolf box has one as well). Overall will buy again.

The quality of the product is great. It comes with a tool to pull panels off if you need, and comes with tap-ins for most if not all cars. It's up to you to determine which fuses to tap into, you need to tap into one fuse with constant power (something that is always on) and one fuse with accessory power (something that's on only when the car is on). The taps all have 2 slots for fuses to go, YOU NEED TO KEEP THE 15a FUSE THAT COMES WITH THE TAP ON. Put the fuse you're tapping into in the other slot on the tap. It won't work unless both fuses are in the tap. This isn't made clear in any part of the instructions, and confused the hell out of me. Overall the product is good and functions as it should, but the unclear instructions made the install a little bit of a pain and took a bit for me to figure out. Hope this review helps someone out who ends up in a similar situation to me.

The idea isnt bad, it should work. But my terminals basically fell apart so I had to use new ones, the volt display never worked for me, even when I tested it with multi meter. Just overall really cheap and I missed the return window. UPDATE: They heard my problem and accepted a refund. It was very appreciated.

im no professional but even i could figure this out easily. dashcam powers on when car starts and after turning car off, you still have about a minute of power left before shutting down.

I purchased this camera and hardwire kit with about a one month timeframe before moving to another city. The goal was essentially to use parking mode as a second set of eyes on my car because this city is known for damage and break-ins to personal vehicles. Installation was fairly straightforward. Anybody that can operate a smartphone could navigate the settings on one of these cameras. I would say that the memory card provided is pretty small and once the camera starts recording, you notice there won’t be space for very much footage - especially if you intend to capture videos in parking mode. The problem I had was communication between the app, the camera, and the hardwire kit. There was always some sort of issue! This hardwire kit is fairly easy to install. One wire goes to the ground, one to a constant hot (such as the battery) so it always has power, and the last wire to ACC (some sort of accessory) which has power when the car is on, but turns off when you shut the car off. We tried many variations of ACC and constant connection, made sure there was proper voltage, even purchased a larger memory card, tested and REtested the connection with an electric light tester, etc. The camera was always showing it had power and that it was recording when it should have been, but the footage wouldn’t be there from when the camera should have been recording in parking mode. All settings for parking mode were arranged. The camera recognized the hardwire kit and displayed a large “P” on it which is the icon for parking mode, but again, there was never any footage. After all of this, I reached out to RedTiger customer service AND tech support. They STARTED off nice. In support’s first response, they said rest assured if I followed the troubleshooting they sent me and it didn’t work, they would replace my items. Well, guess what? The troubleshooting didn’t work and then they jerked me around, asked me a million more questions, asked for photos, the whole nine yards. I sent everything they asked for, even more, and maybe that was my mistake. Next, they would say oh I need another photo or send me another troubleshooting list even though they sent that same one to me 2 emails prior. I mean how different can a fuse box look from one photo to another? You can’t exactly cram a phone or camera up there to take a photo… Well, now I have jerked around with this camera, hardwire kit, and these customer/tech “support” people for almost a month. The camera arrived on March 4th and it is now March 26th. Of course this is a long review, and if you’re still with me, I applaud you. Save yourself the time, energy, stress, and sanity. Do NOT buy this camera/hardwire kit especially if you plan on using the parking mode! After this disaster, I purchased the ROVE brand dual dash cam. It took the same amount of time to set up as this travesty. The ROVE camera announces when it is switching modes (you can also turn that feature off), Parking mode on/off, recording, stop recording, Wi-Fi on, WiFi off, etc. The best part is - all of my footage is there! It has been like night and day. Good luck to all of you folks. I hope you find the camera that fits your needs!

The black cable from the box to the c plug was too short for my vehicle. I am upgrading to 5 stars, because I called Red Tiger’s customer service. I left a message and they called me back the same day and offered to send me a longer hardwiring kit at no cost. They also told me I did not need to send back the original one.

Ottimo, istruzioni solo in inglese.

Ich habe das Redtiger Hardwire Kit gekauft und in meinem Skoda Fabia 3 installiert. Die Installation war zwar grundsätzlich einfach, erforderte jedoch grundlegende elektrische Kenntnisse, insbesondere das Messen von Dauer- und ACC-Spannung am Sicherungskasten bzw. an Sicherungen. Auch das Entfernen von Verkleidungsteilen des Fahrzeugs war notwendig, um an einen Neutralleiter zu gelangen. Dank diesem Kit kann ich nun auch die Parküberwachung nutzen, was eine wirklich positive Erweiterung der Dashcam ist. Trotz der erforderlichen Kenntnisse bin ich mit dem Produkt äußerst zufrieden. Die Kabel machen einen sehr gut isolierten und hochwertigen Eindruck, und der Preis scheint mir gerechtfertigt zu sein. Eine klare Kaufempfehlung!

facil instalación y largo sufiente para coches grandes

Excellent quality, flawless performance, and very straightforward installation

This kit works well - allows the camera to go into parking mode - comes with everything you need and is easy to use. The cable that goes to the front camera could be longer (so I could site the control box where I wanted it) but I managed quite well. Decent value for money - it makes my camera look professionally fitted.