Lutron Diva LED+ Dimmer Light Switch for Dimmable LED, Halogen, and Incandescent Bulbs, 150 Watt, Single-Pole or 3-Way, DVCL-153P-WH, White

We just had our first child and during the course of setting up the baby's room we realized we needed a way to reduce the light level in the room at night when changing diapers, etc... I bought this unit to match another I had in the house aesthetically. I like it because you operate it normally with the rocker switch, but then if you want to turn down the lighting level you can using the discreet slider. This seems to not put as much wear and tear on the dimmer slider as it infrequently is moved. It took quite a bit of research to figure out what all the different models of Lutron dimmers did. They have a lot of them that look identical, but with different characteristics operating wise. Even looking at Lutron's site, not all the model numbers matched up with what Amazon sold. I eventually figured out that this would be the best dimmer for me as compared to my older one downstairs, this is a newer model that supports CFL/LED screw in type bulbs. It has one wattage rating for CFL/LED and a separate for incandescent (i.e. 150 watts for CFL/LED and 600 watts for normal incandescent/halogen). While I was using this on a halogen fixture today, I wanted the ability to swap to LED later so I went with this one over the older series. Note that this one does *not* have the convenient little night light that let's you find the switch in the dark like the older series (that only does incandescent) does. I suspect this is because in order for that to work, it must "leak" some current through the "load" light bulb in order to light the nightlight, and CFL/LED ballasts don't think that is very funny. Amazon also sells this same exact switch, but with an "H" on the end of the product SKU. From what I can tell, that just means you get the "retail" clamshell packaging and a faceplate cover with it instead of the small contractor style cardboard box. I hate packaging waste and I already had faceplate covers, so I went with this one. One other feature of note is that this unit has a little thumbwheel on the bottom left of the switch (behind the wall plate cover) that let's you set the minimum dimming level. I suspect this is to keep CFL's / LED's from freaking out and flickering when they don't get enough power to fire up the lamp and keep it lit. I am not sure if the older series had this or not. Since I am just using it with a halogen light right now I left it set to the default setting which works great and starts off at an extremely low light level. My wife loves me for buying and installing this thing, and I am happy with the quality. Highly recommended! -Eric

The Lutron Diva dimmable CFL/LED dimmer was easy to install. I purchased 2 of these (and forgot to order the wallplates)[FACE PALM], one to control my 5 Philips 423418 6-Watt (50-Watt) MR16 LED Indoor Flood GU10 Base,120-Volt Light Bulb, Dimmable in a track light setup and the other to control my 5 SYL CF14EL/TWIST/827/DIM/RP 14W CFL 29969 SYLVANIA LAMPS in a dining room chandelier. When controlling the above Philips LED bulbs with this dimmer, it will dim down to almost nothing (no useable light output) but it does have some flicker when it's dimmed down to ~20% useable light output with these lamps. On the up side, there's no buzz or hum at all, it's completely silent. The above Sylvania dimmable CFL lamps works well with this dimmer, I was able to get these CFL lamps dimmed down to ~30% from full brightness before the lamps would begin to "pop" on & off. The really nice thing about this dimmer is that you can set the dimming threshold via a small adjustment switch behind the wallplate. You do this by turning the switch on and setting the dimming slider to its lowest setting, then you can move the adjustment switch to a point to where the lights are dimmed as far as they'll go without popping on & off and reliably turn on with the dimming slider set to its lowest setting. Just like the dimmer controlling the LEDs, this one has zero buzz or hum controlling these dimmable CFL lamps. What I like about this dimmer/switch: It works with incandescent/halogen, CFL, and LED lamps. The toggle switch works smoothly and without any vagueness. The slider for the dimmer works smoothly/fluidly. The adjustable dimmer cutoff threshold adjustment works as advertized.

Lutron is THE brand. Super well made, works with LED's and everything else. 1 way, 2 way all built into one. I'm switching my light switches out for these Diva models and I like these dimmers the best. Work great. Might be more expensive than others, but this is THE brand they won't let you down.

These work great with LED lights. They arrived quickly and in perfect condition with installation instructions that are clear and accurate.

Funciona de manera perfecta con unos leds dimmeables chinos que compre de ebay. No cabe duda de que son compatibles con una gran cantidad de leds.

Que l'interrupteur et les Leds de Cosco sont compatibles

easy to use. the one i had before had a button you had to push and people that came to my home had a hard time figuring out how to turn it on. Not this one though. This is great

le doy 4 estrellas porque aunque la manufactura del producto es de calidad, éste viene sin la placa exterior y en algunas de las imágenes promocionales aparece la placa.