ChooChoo Side Table Living Room with Drawer and Shelf

These are great tables, especially to use along side a recliner and couch.They're easy to put together. Follow the directions! Everything you need is in there including the screwdriver!! Lay it on its side on the floor when your building it, tighten all the tabs a half turn and did I mention?... never use power tools when building small furniture like this.once they're done, you'll love them... there's a nice drawer to keep things in -- remotes, etcIt's pretty, sturdy, I bet will last a long time. ♡

Packaging: great! Each piece was wall protected. Nothing worse than poor packaging and a damaged piece.Assembly: easy. If you’ve ever assembled a piece of furniture, you will find this familiar. It even comes with a small driver. I recommend an electric one to drive the hardware and use the one that came with the unit to tighten.Quality: solid! It even comes with adhesive pads to protect the floor. Very sold, level, and doesn’t overpower the space.If you need a narrow end table, this one works perfectly.

This is a great little table. It went together fairly easily, but I advise reading the advice in some of the reviews below. The one problem with the directions is that they need to give better directions about putting the gliders on the side pieces. Despite carefully reviewing the instructions, I didn't notice that each piece has teeny tiny almost non-existent little pinholes toward what should be the bottom edge. These are allegedly pilot holes for where to position the screws for the gliders. I put them on the wrong way and had to disassemble part of the table and do that part over again. The directions need better pictures of the difference between the gliders when you attach them, as some people might not realize that one half of each set has an arrowhead kind of pattern on the end toward the back of the drawer. They also need to indicate the pilot holes and give a warning to position them properly. (I put together a different piece of furniture after this one that contained such an instruction and it was very helpful.)As said below, when you attach the gliders, make sure the screws go in as far and as flush as possible, or else your drawer will catch on them. When assembled this is great and looks good.

Was easy to put together and perfect for the space I bought it for. All the predrilled holes aligned just fine. Warning though. You need to hand screw everything so rest up your hand!

This is a nice side table. The assembly hardware is of good quality. The wood product finishes are very nice and the pieces assemble solidly. The instructions are easy to follow except for the drawer slides where a little more concentration is needed . . . or maybe it’s just me.

Just what we were looking for! The table was well made and went together very easily (my husband and I did it in well under an hour). We were very pleased with the quality of the wood. The only thing I would suggest to the company is that the glide parts weren’t labeled with stickers like every other part was. That would have been a big help.

Sturdy. Everything came in one piece and the instructions were some of the clearest I've encountered for Amazon furniture. Took about an hour for me to muscle my way through with manual screwdrivers only. I do not recommend a drill unless you go slow, because screw placement will make or break this for you in my opinion.Problems I encountered and how I overcame them:Drawer was rickety, kept catching when trying to pull out. I had to go back and tighten the tiny black screws on the rails. If they are not as flush as you can possibly get them, they will cause the wheels to catch. Once I got them as tight as possible, the drawer pull out was much smoother.Getting the first set of rails on. Space was EXTREMELY tight and frustrating. I ended up using a small screwdriver from my house, pressing it tightly with one hand, and using a pair of pliers to turn the screwdriver. Like a socket wrench type action. This sucked, I can't lie. And it wasn't possible to put them on earlier due to the cam bolts/screws under the rail. But I got through it.Overall, this is worth the money as long as you are willing to take your time and line things up properly and really use some elbow grease to get the screws in straight and flush.

What a cute little table, right? And check out that happy little "Assembly Instructions" message at the front of the assembly manual. What's not to love?That message. Oooh boy, that message. That kept coming back into my mind as I went through the 90+ minute (what??) assembly process. I initially read that message and was literally put into a good mood because of it. I sat down in the floor, fired up some music to have playing in the background, and got to work. I think that happy little message made me take this less seriously than perhaps I should have. See, I typically spend time reviewing the assembly instruction manual for something like this well before starting the actual work. I'll inspect all the parts given me and really try to understand what's ahead of me before proceeding. But with this? With this happy little message at the start? What could go wrong?1st off, you can see how there are 13 listed parts (8 is used twice, so 14, but who's counting?). That should have been my first clue to slow down and take this a bit more seriously. This is a small table, a table that doesn't command much in the way of respect but coupled with 14 separate parts comprising the bulk of the body, I should have realized that the diminutive dimensions would make things more, not less, difficult to work around.Then you get to the metal bits. There are over 75 pieces here as well. In all, you're just a bit shy of 100 unique parts that comprise this small unassuming side-table. Emphasis on the small, too. The boards go together in very specific ways. And they are easy to flip or switch around in the wrong direction, overlooking a placement that will cause you rework as you must back up later to fix. I didn’t respect this enough, having to back track 2 (maybe 3) times during installation. To flip a piece around as I wasn’t paying enough attention to the process during the process.Look at the “Step 4” image with the yellow highlight that I added. The instruction manual technically has what you need to correctly interpret the items needed and how to place them. And even though the instruction manual is a very welcome 8.5” x 11” in size, look at how small the images manifest on the page by the time you consider all the white space and ancillary information. The small dots on board “8” are critical for proper placement. But if you’re just breezing through this, they are hard to see plainly (the size *and* the angles aren’t ideal here) and you could overlook the proper placement of the piece (causing you to back-track later to fix it. This is because the top/bottom of the piece isn’t readily apparent in context and the image needs to be consulted to get it correct.Ok, so I’m a doofus. How is that ChooChoo’s fault? Well check out the included photo. Although the “C” screws in this step didn't technically break all the way through to the other side, they broke through enough to mar the surface and make the item extremely ugly after assembly. The screws are just a hair too long!Then, Step 5 was the killer for me. Understanding it was simple enough, but getting those little “G” screws screwed in? How hard can it be, right? 6 little screws that screw into pre-drilled holes! What could be easier? Well, many of the pre-drilled holes are too narrow relative to the screws going into them with this table. Again, by just a fraction. It causes one to have to exert considerable force to get the screw to bore into the wood. Obviously, that’s good from a stability perspective, but it was terrible in the moment when I realized that none of the screwdrivers I had handy were terribly suitable to the task (being either too large or too small) due to the close confines you find yourself in while trying to complete this step. Thankfully (seriously), the screws were sufficiently strong enough to withstand the high torque needed to crank them. I was really worried for a minute or two that it would be impossible to screw them in without stripping them, but that wasn’t the case.But getting the proper angle and sized head in place while exerting enough force downward to keep the screwdriver from slipping while turning the screw? That herculean task was *almost* too much for me. There were a few minutes where I literally thought that I wasn’t going to be able to do this without getting a more specialized screwdriver for the task. But after much time, frustration, and manipulation, I finally got those dang screws in place.At the end of this process, 90+ minutes of my life were gone, the sides were marred by screws just about ready to poke out of them, and I was sitting (in a full-body sweat mind you) there feeling as if this little table had conquered me!

I needed a couple of side tables for a very narrow space and these fit the bill perfectly. They are very nice looking. The wood finish tops were a dark brown and the white base was a true bright white. Assembly was very straight forward and the instructions were correct. Took me about 30 minutes to put together (all hardware was included). There is enough room on the shelves to put board games or books. The drawer itself is a little wobbly but slides smooth and would be enough room for small items such as remotes, chargers, cards etc. Great tables for a narrow or small spaces. The height was perfect for easy reach beside a standard height couch. Very good quality for the price.

Size is exactly what I needed beside chair in second bedroom I use as a den with tv, desk etc. looks great, very solid, price is good as I couldn't find what I wanted in stores comparable especially the color black which is same as my desk. I've never appreciated having to put things together but this really was not hard at all, steps were laid out perfect with every piece fitting easily.

They are suitable for the smaller room used in. The assembly is like IKEA with the pin and twist anchor and was fairly easy to assemble. The size was a little smaller than we wanted but others where just too large. We're happy with them and they look pretty good in the room!

De bonne qualité et facile à monter

Have to give this a 5 star, I am a novice at putting things together but this company's unique way of designing this product and how to install was awesome. I cannot give an exact time it took as I was going back and forth while doing other house. However if I need to buy another piece of furniture I'm buying from this company and also recommend anyone to buy from them. No stress, no hassle a lot easier than Ikea