GIANTARM Silk Metallic Silver PLA 3D Printer Filament 1kg Spool, 1.75mm Dimensional Accuracy +/-0.03mm, 1080 Feet per Roll, Vacuum Packaging

I used this GIANTARM Silk Silver PLA to print a Star Wars-inspired beskar ingot on a geometric pattern-transfer build plate, and the finish is incredible. Silk filaments can sometimes be hit-or-miss when it comes to capturing fine details from a textured bed, but this stuff took the pattern perfectly. The silver has a genuine, high-gloss metallic luster that looks like machined metal right off the printer—no post-processing or polishing needed at all. In the photo, you can see how beautifully it picks up the light across the transferred triangular facets, and the Galactic Empire insignia on the corner came out razor-sharp with clean, defined lines. Stacking it right next to a black print really shows off just how bright and reflective the sheen is. It was also completely trouble-free to print. The filament fed smoothly with no clogs or bubbling, and the layer adhesion is surprisingly strong for a silk blend, which can sometimes be brittle. It laid down flawlessly on the first layer, didn't try to warp or lift at the edges, and popped right off the plate once it cooled down without ruining the transferred texture. If you're looking for a reliable, ultra-shiny silver that can actually handle highly detailed surface textures, this roll is a fantastic choice.

While I usually stick with the main BIG 5 manufacturers of filament for my standard colors, Giantarm was clearly the fan favorite when it came to silk PLA. I took a chance, even though it was a few dollars more than the big brands and I am glad I did. Phenomenal results on even the most standard prints. The luster and shine are definitely a step above the others. I printed with the Bambu Silk PLA profile on a Bambulab A1 outfitted with a BMCU and had no issues with feeding or layer adhesion whatsoever. The photo of my first print shows the significant amount of luster even in indoor light, and that is with no ironing or post correction. It printed dry out of the pack, but I'm sure it would perform even better out of a dryer. 5 stars, highly recommended 👍

Really good filament Used almost the entire roll without any issues. Excellent value, melts on temp, no jamming due to bad diameters, no clogging, nada works like a champ

This is IT! Came vacuum packed, no damage. It's super super strong. The adhesion is perfect. No tangling, no bent corners. It dries just fine. I can't smell it. The large spool is great because I'm going to use gold so often. The picture is about 3 inches in size, for the coin. I made the circuit board myself using Tinkercard, sliced with Cura. Printed on Ender 3 pro. It is awesome. I should have gotten it sooner. I'm not sure if they are any bad reviews, but if there are, its because their printers stink or are overused. My Ender is 6 years old, but its never been used, so I can tell you it works perfect at 200 degrees with 60 bed.

I used this Royal Blue Silk PLA to print most of a large macaw project and had a great experience with it. The color is beautiful in person, very vibrant with a nice silky finish that makes the final result look really premium. I had no printing issues at all. No clogs, no tangling, good layer consistency, and the spool fed smoothly during long prints. The color stayed consistent and the prints came out clean. I would definitely buy this filament again for decorative projects and display pieces.

Great quality! I had no issues with my printer, the spool was neat and untangled, it was vacuum sealed, and it budget friendly. My print looked amazing! I would recommend.

Love this color and no issues printing with. No tangling or clogging. Okay qualityy

Just what I wanted a gold that looks like gold, it printed a perfect test right out of the bag, so impressed, so beautiful, this is the best true 18K gold I have seen yet. Best of all did not need to dry it first, nice and crispy right out of the bag I really do appreciate that, stunning beautiful result. Remember to lower your initial layer speed, outer wall speed, and top surface speed all to 30 for the best shine, its beautiful.

Das Filament lässt sich nicht Drucken da es die Düse aufgrund von Dicken Stellen(bis 2,05 mm) verstopft.

Leider können die Fotos die Farben des Filaments nicht richtig wiedergegeben. Es sieht einfach klasse aus. Ich werde mir bestimmt noch andere Farbkombinationen bestellen!

I always think the signs of a good quality filament is the way it is packaged as it shows that they manufacturers care about how it is stored in the weeks/months between the factory floor and it arriving at the end user. The quality of printing with a filament suffers when it has been exposed to moisture and dust so to receive the silk PLA in a vacuum sealed bag with a silica gel packet inside shows that they care about quality. The packaging also comes with a re-sealable bag which is a nice touch. I've made a couple of test prints and the ease of printing is very good. It behaves no different to normal PLA using the same print settings (I used 210 degrees hotend with a 60 degrees heated bed). Despite some stringing (I probably could get away with 200 degrees hotend) I didn't have any issues with the prints (working first time). Colour is replicated really well (a nice shiny copper look) from the colour on the spool and the finish on the print is really smooth (I printed at 0.2mm layers and 100mm/s speed which explains the visibility of the layers). For price/kg this is a really good choice for all standard of users. Highly recommended.

very nice product and on my bambulab a1 work perfectly

Bobine de filament 3d de 1kg qui fonctionne parfaitement sur mon imprimante 3d elegoo neptune 4 pro. Température du bed à 60°, température extrudeur à 195°. Bonne accroche sur le plateau, pas de cheveux d'ange. Prix correct.