SMALLRIG ZV-E10 Cage with Silicone Handle and Built-in Threaded Holes, Cold Shoe and Quick Release Plate for Sony ZV-E10

This cage is a game-changer for my Sony ZV-E10 setup. The fit is perfect, and the silicone grip makes it so much more comfortable to hold for long shoots. It adds great protection to the camera while still giving full access to the buttons, battery, and memory card slot. I love all the mounting points—it’s easy to attach a mic, light, or tripod without feeling bulky. Very sturdy and well-made, definitely worth it if you want to upgrade your rig.

One of the interesting things about purchasing products that have been on the market for a few years is that they have been tested. This discovery of the most insightful benefits and most woesome issues has informed the development of the SMALLRIG Camera Cage for the Sony ZV-E10. And the cage makes the experience of using the Sony ZV-E10 a lot more enjoyable knowing which insights, both bad and good, have come to light. This camera cage is the latest in design from SMALLRIG, at least it is in April of 2025. Including the larger cut out for the hot shoe mount and the arca plate swiss mount made right into the bottom of the cage. I don't want to restate all the improvements it's made, but rather point out this is better buy now, than it was a couple years ago. More bang for your buck! And out of the box, what you get is the cage and small baggie containing the securing clip, screw, and allen key. No plastic, I like that. I bought this camera cage mainly for protection of the Sony ZV-E10. The aluminum construction feels great and will protect the corners of the camera from falls that would have caused major damage. Even being aluminum, this will make the camera even more heavier; although, this is the case for all cameras. The cage also makes great use for extra mounting points to turn this little guy into a entry-level "Rig". With the addition of a cold shoe mount on the bottom, 1/4 - 20 and 3/8 inch screw points, you could mount monitors, stands, lights, and microphones. Three 1/4 - 20 threads along each side, four on top with one 3/8, and five on the bottom with a single 3/8 thread as well. I like that it comes with a small silver flat head tool that magnetizes itself into the bottom of the cage. Convenient. I like the fact that it has both 1/4 and 3/8 female threads. Versatile. The camera in it's stock form comes with a very subtle hand grip, I absolutely love the feel and added girth the cage gives you with its silicone grip solution. Incredible. A few drawbacks I noticed. I mount a Arca Swiss plate on the top of the cage with a 1/4 - 20 thread and clamp it to my overhead rig. If you want it dead center, you sacrifice the ability to switch the camera on/off because the switch itself becomes blocked by the overhang of the plate. I remedy this by just shifting it over one to left, and it works fine. And if you have tiny fingers, or small plate this could be your remedy! The depth at which the cage makes the battery compartment can be tricky to get the SD Card and Battery in and out. It's really not a big deal, just takes some time to get used to. Lastly, I may be very well doing it wrong, but the mounting clip that secures the camera to the cage, doesn't fit as tight as I would want it. Meaning, when securing the clip by inserting it into the camera's original dongle mounting location and using the provided screw to fasten them together, the clip doesn't look flush. I tried keeping the bottom screw loose and doing it again, but was unable to flatten it. I'll include pictures for you fam. These really are minor nuances and make no impact on overall satisfaction on the SMALLRIG camera cage for the Sony ZV-E10. Don't get it twisted, I love this thing! It's almost a necessity. Unless you want a really sleek and slim look. It's incredibly useful, with all it's mounting options and the protection it provides alone, is worth the reason to get one for yours. It's worth the cost compared to a new camera. No exaggeration. This cage is for anyone with this camera and I wouldn't recommend anyone to go without it!

This camera cage is an absolute game changer that has completely transformed my shooting experience. The build quality is rock solid, but the real magic lies in the endless array of attachment points that let me rig up my monitors, mics, and lights exactly how I need them. It fits like a glove, and the integrated grip feels so natural and secure in my hand that I actually enjoy holding my camera more now than I did before. I can even still use my DJI mic adapter. A must have for your EV10.

Saw some YouTubers recommend for your first setup. They work great! Decent price to get started. They weren't wrong.

It fits and works great! For a great camera!

The unibody metal is very high quality, very easy to install. The zve10 is made of plastic and it’s a pretty small size so the metal makes it feel a lot more professional and secure. I love the built in arca Swiss plate, i bought some quick release clamps for my tripods and now I don’t have to screw my camera on and off all the time, just a simple detach and attach. I absolutely love the grip, it’s originally very small and can be annoying for people with bigger hands. The added grip makes it 10x more comfortable to hold. Highly recommend this cage no matter what level you’re at.

I’d say that most of the reviews here are pretty accurate. This cage is built well and the silicone grip makes it *much* more comfortable to hold. The extra mounts are much appreciated. My wife and I only have a couple small complaints: 1) The cage slightly gets in the way of the shutter button. You can still press it with the side of your finger, but if you have larger fingers you might have some issues. I’m not sure they could make the cage any smaller to accommodate the button, though… 2) The camera strap holes are a little narrow. This cage does not support our other Canon and Sony camera straps as they are too wide for the strap holes provided by the cage. The cage goes over one of the camera’s strap mounts, so you can’t use the camera’s built-in strap mounts while using the cage. Not a deal breaker, but now we need a new strap specifically for this cage. 3) The cage gets in the way of some accessories (mics, lights, etc.) for the hot shoe. Your mileage may vary. Overall, this cage is great. You still have access to everything you need on the camera and it’s built like a tank. There is some added weight with the cage, which is actually appreciated if you’re using a slightly heavier or larger lens as it balances out. If you’re vlogging, using the camera as a webcam, or using the camera on a tripod the cage may not be necessary. However, if you’re doing long handheld sessions, or need a lot of additional mounts and accessories for your camera, this cage will do the trick.

Wonderful case

Ideal for rapid shooting and for a small mobile production team. Like all Small Rig gear, excellent build quality

Ich habe vor kurzem den SMALLRIG ZV-E10 Cage erworben und bin äußerst zufrieden mit meinem Kauf. Dieser Cage bietet eine beeindruckende Kombination aus Robustheit, Vielseitigkeit und Benutzerfreundlichkeit, die meine Erwartungen übertroffen hat. **Robustheit:** Der Cage besteht aus hochwertigem Aluminium, was ihn nicht nur leicht, sondern auch äußerst robust macht. Selbst bei intensiver Nutzung zeigt er keine Anzeichen von Verschleiß oder Verformung. Das Material fühlt sich hochwertig an und bietet optimalen Schutz für meine Kamera. **Passform:** Die Passform des Cages ist perfekt auf die Sony ZV-E10 abgestimmt. Alle Anschlüsse und Bedienelemente bleiben vollständig zugänglich, was die Bedienung der Kamera erheblich erleichtert. Die Installation war unkompliziert und innerhalb weniger Minuten erledigt. **Vielseitigkeit:** Besonders beeindruckend ist die Vielseitigkeit dieses Cages. Dank der zahlreichen 1/4"-20 und 3/8"-16 Gewindebohrungen kann ich verschiedenstes Zubehör wie Mikrofone, Leuchten und Monitore problemlos anbringen. Die integrierte Cold Shoe Halterung ist ebenfalls ein großes Plus, da sie zusätzliche Flexibilität bei der Anbringung von Zubehör bietet. **Ergonomie:** Der Cage verbessert die Ergonomie der Kamera erheblich. Der zusätzliche Griff sorgt für eine stabilere Handhabung, insbesondere bei längeren Aufnahmen. Dies ist besonders nützlich bei Videoaufnahmen, wo eine ruhige Hand entscheidend ist. Der Griff ist besonders für Personen mit großen Händen ideal, da er ausreichend Platz und Komfort bietet, was die Handhabung der Kamera erheblich erleichtert. **Zusätzliche Features:** Ein weiteres praktisches Feature ist die Arca-Swiss-kompatible Basis, die schnelle Wechsel zwischen Handheld- und Stativaufnahmen ermöglicht. Dies spart Zeit und macht den Workflow effizienter. **Nachteil:** Ein kleiner Nachteil des Cages ist, dass der Auslöser und der C1-Knopf etwas schwerer zu erreichen sind. Dies stellt jedoch keine signifikante Einschränkung dar und beeinträchtigt die Nutzung der Kamera nicht wesentlich. **Fazit:** Der SMALLRIG ZV-E10 Cage ist ein unverzichtbares Zubehör für alle, die ihre Sony ZV-E10 optimal nutzen möchten. Die Kombination aus Robustheit, Passgenauigkeit und Vielseitigkeit macht ihn zu einer exzellenten Wahl. Ich kann diesen Cage uneingeschränkt empfehlen und bin überzeugt, dass er die Nutzung Ihrer Kamera erheblich verbessern wird.

The quality of this cage does not disappoint. Each section of the frame moulds to the camera perfectly and all buttons can still be used with ease. The grip is an improvement for the camera as it has a more rounded handle making it more comfortable to hold. Plenty of mounting points if you like having attachments! Battery access isn't interfered with by the cage.

Quality of material is very good. It gives good grip to hold the camera. But felt it is over priced. It fits perfectly to the camera. No need to remove the frame for battery replacement, charging and SD card removal. Once you fix the frame no need to remove it. Will not guarantee it will protect your camera. will give more confidence to hold camera without any fear of fall.

Been using this cage on my ZV-E10 and it honestly makes the camera feel way more complete. First thing I noticed was the grip, it’s a lot more comfortable than the stock one, especially when using heavier lenses. Feels way more secure in hand. Build quality is really solid too. It’s all metal and doesn’t flex, so once it’s on the camera everything just feels more durable and protected. Definitely gives a bit more confidence when filming or moving around. I like all the mounting options as well — makes it easy to add a mic, light, or whatever without needing extra stuff. It basically turns the camera into a proper little rig.  Only thing is it adds a bit of weight and makes the setup slightly bigger, but that’s kind of expected with any cage. Overall though, really happy with it… feels like one of those upgrades that you don’t want to take off once you start using it.