ARCTIC P12 PWM PST A-RGB (3 Pack) - PC Fans, 120mm PWM Case Fan Optimized for Static Pressure, Semi-Passive: 200–2000 RPM (0 RPM <5%), 5V 3 pin ARGB LED - Black

Good performance and colors, just didn’t fit my aesthetic. Arctic always has great cooling performance, and value for money, and are frequently one of my top choices for CPU coolers.

I am really impressed with these fans. They are extremely quiet, even under load, which is exactly what I was looking for. The build quality feels solid, and everything from the packaging to the cabling shows attention to detail. The ARGB lighting is fine and customizable, and the fans stay silent until needed. What really stands out is the overall quality - no surprise coming from a German brand. You can tell these weren’t made cheap like ThermalRight. Great performance, sleek aesthetics, and silent operation make them a fantastic value. I would absolutely buy them again for my next build, and wish I have done it earlier.

I opt for air cooling over water cooling whenever possible. Yet, I chose a case that is notoriously sub-optimal for air cooling -- the Lian Li o11 Dynamic. To make matters worse, my rig is equipped with a 5900X and an RTX 3090, both which are known to run hot. Despite it all, I made it my mission to make air cooling viable in this case. The P8, P12 and P14 series from Arctic have made this possible, imo, a-RGB or not. I installed 3 of the P12 a-RGB models as intake on the side, one P14 a-RGB as intake on the bottom, two P14 a-RGBs as intake and exhaust on the top, and two P8s on the rear as exhaust (all PWM). I also replaced the fans on my Fuma Scythe 2 rev B CPU cooler with two P12 fans. Overall, temperature are amazing. Been playing a lot of Cyberpunk recently, with CPU temps averaging 68-69C at max load (1440p 170Hz, max settings with ray-tracing) and GPU temps at around 66C. ARGB looks decent on the fans and the grill on the side and bottom fans doesn't look too bad -- at least compared to other fans that I tried, like Corsair's SP120 line. Oh yeah, it's worth mentioning that I switched to the Arctic P series of fans because I was severely disappointed with the performance and aesthetic of Corsair's SP120 fans that I used to roll. This new configuration brought down my CPU and GPU temps by a whopping of 6-7C, at least. In conclusion, very happy with the performance, satisfied with the aesthetics.

Keep in mind, these fans are designed for static pressure, which means radiators. I tested them out as case fans first, they're not great at it for a number of reasons, the main one being they push air in a very linear fashion. They work GREAT on radiators, high airflow, and at maximum speed they're not nearly as loud as some other fans I've used. At up to around 1500RPM, you can barely hear them at all - and at that speed they're moving a LOT of air. Also the price, $42 for 3 great fans with nice RGB? That's pretty good compared to a lot of other fan makers. Both the power & RGB plugs are daisy-chainable on these fans, which is a feature I'm only using on the RGB connectors as I don't like having multiple fans plugged in to one header directly - I use Splitters that use 4-pin Molex Power to power the fans, then there's a signal wire that runs to the motherboard for speed control. Included a picture of them running on the "Starry Night" pattern from an Asus motherboard.

great fans, very quiet. perfectly replaced my old fans and the RGB was totally compatible. so far going strong for 4 months and work great.

These fans work very well. They are quiet and push a good amount of air. The LEDs are vibrant, and these fans can be connected directly to an ARGB header on the motherboard instead of relying on a proprietary controller. The cables are difficult to work with though - they can be daisy chained, but the cables are kinda long with a short splitter at the end. This leaves a lot of excess cable when daisy chaining fans together next to each other.

Put them on my aio in order to mostly use as an ambient light. They work, are fairly quiet, cool nicely, and look good. Video shows the three main settings I useat the end, plus a couple other settings for those who enjoy flashier rgb. Dimming capabilities on these is also very nice.

These fans are great performers at a great price. I had to take the stock fans out of my case and replace them with a higher RPM fan. I used 2 of these on bottom as intake, and one on top to help with exhaust. Installation was very easy and they help keep my case cool. They are also not very loud which is very nice. Color is configurable through whatever program you use to monitor your motherboard (mine is msi).

(Cometarios sobre un producto comprado en 2022 y funcionando desde entonces... Curiosamente, el precio no ha cambiado, lo que no está nada mal) Estos ventiladores permiten encadenar los conectores de alimentación (con lo que un único conector en la placa base será suficiente para conectar estos tres ventiladores). Aunque simplifica mucho la instalación, tienes que ocultar todo el cable que sobra entre dos ventiladores, el otro cable va a la placa base. Hay sistemas más limpios, pero bastante más caros. Una vez montados funcionan perfectamente. Yo los tengo montados en la parte superior de la caja, para sacar el aire. Con 4 años de uso, siguen sin hacer apenas ruido a pesar de sacar una buena cantidad de aire. Los colores ARGB están bien, pero resultan menos vívidos y "vibrantes" que otros ventiladres que tengo (tampoco es que me importe mucho)

Virtually silent fans, only noticeable if you push them above 90% speed. But the amount of air they push out isn't as much as airflow fans since they are designed for high static pressure to push air through radiators.

Tavsiye ederim çok güzel ve kaliteli bir ürün sessiz çalışıyor

.

These fans are relatively cheap, but they have pretty RGB and great cooling performance, which I've come to expect from Arctic products.