Tool-Free NVMe & SATA M.2 SSD Enclosure, USB 3.2 Type-C (EC-SNVE)

Excellent quality enclosure, obviously built to very high standards, requires no tools at all which is excellent, I did have ti stare at the top lid a few seconds to be able to lift it off (its quite tight so you really have to pull on the end furthest away from the USB-C connector but once you lift to off to seems quite obvious). So I really like this enclosure, it's the nicest enclosure that I have ever purchased. It really is a no-tools enclosure, once I realized how to pull the top off from the end I was able to open it, slip in the SSD, close the SSD, plug it into my computer and begin my backups in 20 seconds, yes its that easy. The backups ran super fast, the built in fan kept the SSD running at top speed (modern SSDs all run very hot go get that high speed performance, having this all aluminum enclosure with the built in fan keeps he temperature down so its only warm which means consistent, reliable super high speed.) Highly recommended for its very high quality, easy to open/close with no tools, cool operations and super high performance.

Pretty nice component. Had an extra 512gb nvme card from a swap and this works great as a scratch disc for adding photos to a photo frame. Install was straightforward, it includes a heat transfer pad (and extra one) and the finned all aluminum case is well made and feels solid. The outer area does warm up, but that’s exactly the purpose of the heat transfer process to air. It’s just warm to the touch. It comes with a C-C cable but I used an A-C as my desktop doesn’t have C ports and it works fine but a little slower transferring than the laptop with a C port and the included cable. It’s a non issue when just swapping photos back and forth.

I am genuinely impressed with this SSD enclosure. The first thing that stood out to me was the sleek aluminum cover design; it not only looks premium, but it also gives me confidence that it dissipates heat really well during use. Most importantly, it solved exactly the problem I needed it to solve. It read my SSD drive like a charm. No hassle, no issues; just quick and reliable performance right away. The build quality is excellent. It feels incredibly solid, almost tank-like, and the full aluminum construction makes it feel durable and well-made. It’s also very intuitive to use. I didn’t even need to look at the instruction manual. I especially liked the lever mechanism, instead of dealing with tiny screws to secure the drive, the lever locks it in place perfectly, which makes setup much easier and more convenient. As for value, absolutely worth it. Honestly, the enclosure itself feels so well made that it’s worth keeping even if the SSD inside ends up being corrupt or unusable. Highly recommended!!!

Simple, easy, well built! I needed a way to access the files on an SSD from my laptop and came across this unit in my search. I am impressed by the quality and durability of the device. It is made from extruded aluminum so it will give me years of service and it is a fantastic heat sink and protection for the SSD inside. Setting it up could not have been any easier. Just insert the SSD into the slot (it accepts three different lengths of SSD), close the cover and plug in the supplied USB cable. I did use a USB-C to USB-A adapter that I had handy. The device is compatible with my Windows 11 PC and it showed up immediately once I plugged in the USB cable. A discrete blue LED indicator confirms connection, power and data transfer, which is handy. Even though I connected it to a USB-A port, data transfer speeds were still excellent. Connecting it to USB-C would have made it even faster! The SSD that I'm working with is a 512GB device but the enclosure can support a variety of different storage capacity SSD devices. That will make this a versatile device that I will use for both troubleshooting & repair work as well as for external storage.

I bought this Sabrent branded enclosure because I planned to upgrade my daughter's HP Pavilion "Gaming" PC model 790-0010. I also bought this HP PC from Amazon circa June 2018. The stock loadout of this HP PC had a 1TB WD Blue SATA HDD. Not too long into the life cycle of this HP PC, I bought a WD Blue M.2 SATA 512 GB SSD and installed it into the HP PC's vacant M.2 socket and migrated the WD Blue 1TB HDD "boot" drive to the M.2 SATA SSD and turned the WD Blue 1TB HDD into a data drive. This gave a nice performance boost to this HP PC. Fast forward October 2023 and my daughter is telling me how the 512GB SSD is always full. My daughter who is not overly PC savvy didn't even realize that the 1TB HDD was still there for data storage of things like pics, videos and things of that nature. Still, she managed to fill her 512GB M.2 SSD with Steam and Blizzard games and needed more space. I purchased a 2TB Crucial P3 drive during Amazon's "Prime Day in October 2023" event. Per Crucial's website this NVME drive would work in the HP PC even though it was NVME and not M.2 SATA. I used Clonezilla Live via bootable USB thumb stick to clone the M.2 SATA SSD to the M.2 NVME Crucial drive. So let's talk about the Sabrent enclosure. I selected this because it supports BOTH M.2 SATA and M.2 NVME drives. Other products that I saw supported one or the other but not both. I also have other Sabrent products such as usb to SATA/IDE cables for connecting drives via USB. The handful of Sabrent products appear to be of good quality. They may cost a few bucks more but I like the piece of mind of having a quality product. The enclosure is easy to open up and install a M.2 drive into. Here is my minor quibble and why I removed one star from a perfect 5 from my rating. And this is more on me an not Sabrent. So the product page on Amazon has pictures of the product and has a product video that is officially from Sabrent with a guy named Mike in it. The guy says his name is Mike so I assume that's his name. Mike is happily demoing and showing off the enclosure. It's a great video and I am glad to have watched it. That said, it falsely put me under an impression about the product's use that was not true. To be clear though, the false impression that I was under is clearly documented in the included enclosure product manual. Had I consulted the enclosure manual first, I would have had no confusion. Still, Mike's charisma and charm were intoxicating and I was instantly captivated and trusting of anything Mike was telling me about this enclosure. During the video, Mike claimed that this enclosure supports multiple size M.2 drives. To accomodate this , the video indicates how easy it is to move the "locking pin/nub" to the appropriate locking hole in the enclosure so you can accommodate those shorter M.2 drives. Fantastic! This is great! So the video gave me the impression that regardless of the size of the M.2 drive you are working with, you will have to install a locking pin/nub into the correct locking hole to hold your drive in place so as to close the enclosure. This is not the case. I gather that most M.2 drives are of the 2280 size and the enclosure has permanently installed a turning locking pin at the front of the enclosure that will lock a 2280 sized drive in place. The included locking pin/nub for a shorter drive is in the packaging but not needed nor installed by default in the enclosure. The vide with Mike in it gave me the impression that the locking pin/nub had to be manually removed and reinserted each time a drive was put into the enclosure. That is not the case. Again, the manual calls this out clearly. But I didn't look at the manual because Mike told me everything I needed to know. When it became clear that the turning locking pin/numb in the enclosure is not removeable and then when I consulted the manual, it all made sense. So the confusion is clearly on my end. I should have looked at the manual first. That aside, this is a great product. If you need to clone an M.2 drive to another M.2 drive, you need this in your PC toolbox. I wish the enclosed USB C to USB C cable was a tad longer but not a big deal. I would happily buy more of these and use them as glorified thumb sticks for discarded M.2 drives I have from other upgrades. Great product. Thanks again, Mike! I still trust and believe in you.

I purchased this enclosure to repurpose an NVMe SSD as portable storage, and it couldn't have been easier to set up. The tool-free design is a huge advantage—just open the case, insert the drive, lock it in place, and you're ready to go in less than a minute. The aluminum enclosure feels solid and well made, and I like that it helps dissipate heat during larger file transfers. The connection has been reliable, and transfer speeds are noticeably faster than a traditional USB flash drive, making it perfect for backing up files, transferring large projects, or cloning a drive. Another thing I appreciate is how compact and lightweight it is. It slips easily into a laptop bag, so I can carry a high-capacity SSD with me without taking up much space. Everything worked as plug-and-play with no drivers or extra software required. For the price, this enclosure offers excellent quality and performance. If you have a spare NVMe SSD or need a fast external storage solution, this is an easy recommendation. It's well designed, simple to use, and performs exactly as advertised.

This was the perfect enclosure to park my spare 500gb nvme ssd. the enclosure is slick, the button on one end opens up the enclosure easily and smoothly. Theres two thermal pads to transfer the heat from the nvme into the shell of the enclosure to manage heat. The indicator light is plenty bright and the cable works well. it was easy to install the ssd and it has standoffs for shorter nvme drives as well. when mounting a full size drive you get a smooth tool free instal. No fan so it opperates silently For the price i am happy with my purchase for sure. The cable is nice and short under 10inches long If your looking for an inclosure you could do way worse than this one.

I've never owned a product like this before so I have nothing to compare it to. My impression is that the enclosure is well designed and constructed of quality materials. It was very easy to install the M2 board in it. Performance has met my expectations. On a 55 Gb file transfer it achieved speeds of well over 900 Mb/sec. Not sure how this compares to other products, but I am happy with it.

طلبت المنتج كما في الاعلان وتم ارسال منتج بديل بدون علامة تجارية وقمت بارجاعه

Boitier de bonne qualitée et débit bien suppérieurà une clé USB. Multi-boot avec Ventoy devient un vrai plaisirs.

I recently purchased the SABRENT USB 3.2 10Gbps Type C Tool Free Enclosure as a way to keep my additional NVMe as a compact and fast storage device, and I couldn't be happier with my purchase. The tool-free design made it incredibly easy to set up and the transfer speeds are incredibly fast thanks to the USB 3.2 10Gbps technology. The compact size also makes it incredibly portable, perfect for taking my additional storage with me on the go. I highly recommend this product to anyone in need of a high-quality and reliable external storage solution. Thank you SABRENT for creating such a fantastic product!

Jedyne plusy: Obudowa wygląda solidnie, a jakość wykonania — zarówno na zewnątrz, jak i wewnątrz — jest zauważalna. Beznarzędziowy montaż jest bardzo prosty (choć ma też swoje wady, o czym poniżej). Być może dla kogoś podniosłoby to ocenę do dwóch gwiazdek, ale nie dla mnie. Już przy pierwszym użyciu zauważyłem, że dołączony kabel USB rozłącza urządzenie przy nawet najmniejszym ruchu (może po prostu trafił mi się wadliwy egzemplarz, więc użyłem innego kabla wysokiej klasy), ale to był dopiero początek problemów. Urządzenie co jakiś czas samoistnie odłącza się od systemu. Podczas operacji na plikach doprowadziło to do uszkodzenia tablicy partycji. Zauważyłem też, że dołączony termopad jest za cienki i nie styka się z żadnym z moich dysków NVMe M.2 (Intel Optane 1TB, Samsung Pro 990 2TB, Samsung Plus 990 1TB, Crucial P3 1TB). Ponieważ brakuje tu oddzielnego radiatora, temperatura wewnątrz jest zbyt wysoka — to właśnie wada konstrukcji beznarzędziowej. Co prawda mieści się ona jeszcze w granicach normy, ale... zastosowany chipset to RTL9210, który jest powszechnie znany z awaryjności, zwłaszcza przy wysokich temperaturach. Inny chipset, lepszy termopad lub dodatkowa płytka radiatora rozwiązałyby problem. Spędziłem 3 dni na profesjonalnym odzyskiwaniu danych z uszkodzonej partycji, korzystając z moich pozostałych obudów topowych marek — nie było żadnych problemów. Dodałbym zdjęcia, ale byłem zbyt pochłonięty ratowaniem danych. Analiza: Technicznie obudowa trzyma parametry. Przyczyna nagłego rozłączania - urządzenie podczas pracy (kopiowania) przechodziło w sleep mode, co nie powinno mieć miejsca - to kolejna wada tego kapryśnego chipsetu.

Very good NVMe enclosure — simple, reliable, and easy to use thanks to the tool-free design. Transfer speeds are stable, the enclosure feels solid, and installation takes only a moment. For Raspberry Pi AI projects, especially with Hailo 8 or Hailo-8L / 40 TOPS accelerators, this is actually a very practical solution. Fast external NVMe storage helps a lot when working with larger AI models, datasets, recordings, or swap-heavy workloads. Compact, clean setup and much better than relying only on microSD cards for demanding projects.