Venom Motorcycle Stand Lift, Front & Rear Combo, Universal Paddock Lift Stand, Front Wheel Fork Stand Rear Wheel Swingarm Spool Stand, Compatible With Most Yamaha Honda Kawasaki Suzuki BMW Motorcycles

I was searching for bike stands for my 2015 GSX-S750 and seen so many comments that say they are unstable, and cheap, but I figured I'd give them a chance because I didn't want to spend a ridiculous amount of money on something that's the same quality but a brand name. After receiving them I brought them to the garage and assembled them. Assembly was quick easy, and after assembled they appeared sturdy. Anyone with a motorcycle should have already known the stands dont come with swing arm spools, so that wasn't an issue with me, and bought a set here on Amazon. After assembling them I tried them out and they worked perfectly and bike was stable the whole time. So far the Venom bike stands was a perfect buy for me.

I don't understand how anyone could give these paddock stands anything less than 5 stars. You people who give bad reviews or complain over it not fitting etc., It is NOT the stand manufacturers responsibility to supply you with swingarm spools. If you don't already have spools on your bike than your a newb anyway. First time ever in these comments have I ever seen someone who thinks the stand manufacturer should also supply you with swingarm spools. Spools are a completely different necessary part to a bike. Anyway, these stands are ridiculously great quality stands. A breeze to put together. Leagues better than my old ones that cost double the amount. They are solid & sturdy and lift my bike ultra smooth. I'm posting a pic of my green Ninja on the stands so you can see how awesome these things are. Again, anyone who gives less than 5 stars for these your either clueless with zero bike experience or you got an agenda because I'd give these 6 stars if I could. I truly don't know how they can be any better.

I was looking for cheap but good quality motorcycle lifts. Being that it is 2023, I assumed that Amazon should have some good quality lifts from overseas. Sure enough, they do! I've a 2002 Kawasaki ZRX1200r - about 475LBS dry - and these lifts seem to lift it without much concern from my end. They assemble very simply, but snugly. The tube steel is strong for the task and overall looks good and is well designed. One problem - not all spools and bikes are the same. BE SURE to FIRST slowly fit the rear lifts on/around the spools, making SURE that the brass "claw" wont touch anything other than the spool. I made a mistake by trusting the hooks themselves, and it scratched and took some paint off of my aluminum swing arm. That sucks, but things happen. I subsequently took some Gorilla tape and wrapped them up. Seemed to work well the first time, but will probably have to apply it again moving forward. So, overall a good value for the money. Look and work well - be careful to wrap the brass so you don't scratch your baby :)

I can only attest for rear stand, as it turns out, my front forks are not even and I needed a triple tree and didn’t know (talking to you gen 3 Sv650) but I kept it anyways for future endeavors. I think it’s a deal for the price. My bike got knocked over by another bike while on the stand, and it bent it a bit but was able to be bent back and still works just fine. I’d almost worry if it was more rigid, as it might have damaged the bike, but do with that what you will. It’s not the most top the line stand out there I’m sure, but it does the job just fine if you’re on a budget! Forewarned, it comes pre scratched a bit. There is a little note that says it’s because they assemble them in factory for QC, then repackage. Doesn’t bother me.

Great quality. Work great.

Firstly, yes there are two here. I use this every time I bring my motorcycle home. I use the rear one mainly but I've had my bike on both and have been able to work on it. They do exactly what they should and feel stable.

Worth every penny. The craftsmanship of these matching pair are very durable especially for the price. To put everything together takes no longer than 10 min and comes with a manual, but how hard can it be. These are my second pair for my second bike, and I am very satisfied. The only thing your going to need thats not included is thread lock (blue). The other reviews saying that it is not a sturdy stand or sways, your probably lifting the rear incorrectly or probably dont take care of your equipment. Newer riders to this product - To use this product so it will last as along as you ride read below. 1- Assuming your bike is off, kick stand is down and gears in the N position. Center your front wheel 2- If you have a friend lift the bike up straight, if no friends are available get a piece of 2x4 and place under kick stand so that it elevates the kick stand side of the bike. It varies from bike to bike see what best works for you I have 2012 YZF-R6 3- With a friend set your stand on the swingarm spools and apply pressure downwards slowly the back of your bike will lift off the ground. Without a friend take your rear stand place the lift on the swingarm spools and apply slight pressure, with the opposite hand thats not applying slight pressure use it to try and steady the bike so that its in the up position, what your trying to accomplish is the opposite side from the kick stand will have a slight gap from the stand and swingarm spool, your trying to have it sit correctly before applying pressure downward slowly on the stand to lift your bike. ***A lot of people will just apply pressure without seating first and this causes the left part of your bike stand to do all the work and cause major wear and tear. 4- Lift bike slowly and do work or store away for winter. Always make sure the front wheel is straight as much as possible during the entire lift process. For the front stand assuming your bike is already on the rear stand. 1- Make sure wheel is straight as much as possible, place the stand under the front fork tubes and apply slight pressure downwards. 2- Recheck to make sure both sides are correctly seated before lifting 3- Apply pressure downward slowly and lift the front of your bike 4- Recheck

I purchased these to use on my 99 Kawasaki ZX7R. I read the reviews (of which most were terrible), and decided to give them a shot, anyway. My bike is stripped down, so I wasn't too worried about dropping it. I'm doing repairs for a fall already. First things first: This thing is nowhere near perfect. If there was a jig for welding these, it's never been set correctly. A few things are a millimeter or two off, which upsets things later on. Same deal with the fork mounts. They aren't level. (Side note: there was a level packaged with mine. Why, I don't know. Did anyone else get one?) I had instructions with mine. They were pretty simple, but did leave a bit of a need for deciphering. The main gripe about that, is a need for torque specs. These things wiggle and wobble unless you tighten the bejezuz out of them. If you have a welder and don't mind the work, weld the arms to the main handle. It'll be a much sturdier unit. If you don't want to do that, tighten the bolts until you just about start to bent the piping from the torque. Not the best way to do things, but that tightens up the wobble. The front stand is wide enough to fit around the front tire and brakes, but the fork mounts don't adjust wide enough to clear much at their widest setting. I had to do some finagling to get it to work. There should be a 4th adjustment hole. The attached pictures are how they sit on the front of this bike without adjustments. For me, it did its job, and doing it well enough. If you're willing to do some work to get them right, pick these up. If you want something perfect out the box, go ahead and get some Pitbull stands. I'm a cheapskate, so these were perfect for me. Lol.

Easy to assemble, quality metal product and nuts and bolts. Well constructed and machined, hard plastic on reverse to protect your flooring. Lifted my Kawasaki Vulcan S cruiser easily (weighs 500lbs). Very stable - safe and secure for working on the bike or just having it off the ground in the winter. Great deal - I will look for more Venom products. I would not hesitate to recommend this product or buy from this company again.

Easy to set up, and they work amazing! Used on a 2006 CBR600RR

It works well, solid set, doesn't feel flimsy, could lift my 2004 gsxr 750 without issues, assembly not complicated but they put a sticker to tell you what side goes where on the wrong side, just an assembly distraction. Maybe not as sturdy as a one piece stand but it is more affordable and it works.

Very happy with the product, did not take long to fit correctly for my bike and feels very stable. Already have used it for all my spring maintenance and was very helpful. Made the oil change very easy. I would recommend this product.

Been using them for over a year, quality stands.