Blur Pocket Knife, Olive and Black, 3.4 Inch Steel Recurve Plain Edge Blade, EDC with Assisted Opening, USA Made, Reversible Pocketclip, Everyday Carry Pocket Knife for Men and Women

Positives: This is the best EDC knife I've owned, period. The USA-made Blur has been in my right front pocket for the majority of the last five years, and you can see in the picture that it shows signs of use. As both an office professional during the day and a farmer during my off hours, I use this knife for everything... opening boxes, trimming zip ties, cutting up apples, cutting rope, removing netting from hay bales, stripping wire, impromptu cooking, and performing minor surgical procedures on livestock and myself. It is light enough to be comfortable (I don't know it is there until I need it) but sturdy enough to perform any job I've asked. With the excellent pocket clip I can remove it from my pocket and replace it with one hand even when wearing heavy leather gloves, and it opens with a flip of my thumb, ready for use. The locking mechanism is air-tight and can also be operated with a gloved hand, which is a huge plus. The blade came shaving sharp, and with minimal maintenance, has stayed that way. I generally use a Lansky to sharpen it, and it takes an edge easily. The 14C28N steel has definitely earned my respect, as it also holds an edge well during regular use. I'll touch it up using medium and fine stones, and then either strop using my belt or hit the honing steel that I keep in my kitchen. The hair on the underside of my left arm doesn't stand a chance. The coating is on the aluminum grip has proved to be incredibly durable, showing wear only on the very edges from continuous rubbing, and there are a few tiny nicks where it has been dropped on rough concrete. The coating on the blade remains wear-free and corrosion has been a non-issue. The inserts in the grip work well for traction, and have not separated at all (this was something I worried about, but that worry was unfounded). Whatever adhesive that stuff is attached with seems to be impervious to anything I've subjected my knife to. I've found this knife to be the perfect balance of weight, ergonomics, edge-retention, blade length, and accessibility. I love the pocket clip, and while it does ride a bit high (and is thus a bit more visible to an observer), I prefer this as it allows my knife to be accessible in emergency situations when on horseback, atv, tractor, or in a vehicle. If you want to be more discreet for polite company, there are deep-carry clips available. The affordability also hits a sweet-spot. This knife, while not cheap, is priced more like a quality tool than an heirloom piece. Somewhere in my mind there is an arbitrary cutoff where something becomes too expensive to carry around in my pocket (probably around $75) and this knife falls under that threshold. If it cost twice as much I'd still think it a good value based on performance, but I'd probably be half-afraid to use it. I have a collection of knives and multi-tools, and I've found consistently that the really expensive ones stay in my drawer because I'd just feel terrible to come in and find that I lost a $150 piece of kit somewhere out in my hay field. Unless I am doing something I know will require a multi-tool, or I am headed someplace where a knife clipped to my pocket wouldn't be appreciated, this is what I grab. It is sufficient for the mundane tasks of daily life, professional use on a farm, and if I was ever unlucky enough to need to, and didn't have anything else available, I wouldn't hesitate to open it in defense. Negatives: Albeit very few, there are some (very) minor negatives that are worth mentioning. At one point I severely bent the pocket clip. This led to two things... first, I had to order a Torx driver small enough to get the screws out (I think it was a T3 or T4, and these aren't something most folks commonly have in a toolbox). A hex bit would be a much easier find, because who doesn't have a drawer full of assorted hex bits? The other issue was that I was going to order a spare pocket clip in case I couldn't bend what I had back into shape, and without calling Kershaw, I couldn't find anything but the deep carry clip anywhere. The second *neutral* opinion I have is the tactical appearance of this knife. My employer is pretty forgiving about pocket knives, but I suspect it would raise some serious eyebrows in most office settings since it is a fairly tactical-looking design (especially with the black blade with a shiny, wicked-looking edge). It definitely makes a statement. I say that this is neutral and not a negative because you can easily see what you are getting from the picture. If you don't want a tactical looking knife, then get yourself a Buck Prince or a Case Stockman like Grandpa used to carry, and no one will think twice. Still, it is worth mentioning that, if you are looking for discreet, this isn't. You'll whip it out of your pocket, hit the thumbstud, and with a loud and authoritative "Click!" you'lll be holding a pretty fearsome-looking blade.

Kershaw's Blur is one of those designs that hardly seems to age a day and in my opinion remains just as relevant for EDC well after it first released in 2004, and it's been one of my go-to choices for a good reason. The anodized aluminum handles make this knife deceptively lightweight for the size and help to make it feel smaller than it actually is while in your pocket, and the rubber inserts on the handle offer plenty of grip without being so aggressive that they'll tear up your pockets. The blade comes hair shaving sharp right out of the box, and the 14c28n blades that come on most models is ridiculously easy to resharpen yourself if you don't feel like sending back to Kershaw for resharpening. The inset liner lock helps to cut down on weight in conjunction with the aluminum handles, and has been plenty strong even after years of use on the Blurs in my collection. Kershaw's "SpeedSafe" assisted opening system is very authoritative when deploying the blade, and definitely helps the Blur live up to its name. Interestingly, I would say the springs on the Blurs feels "gentler" than on other Kershaws I own, such as the Cryo and Link, but I'd say the spring system on the Blur perfectly nails the sweet spot for reliability while still being fairly easy to use. YMMV on the finish though. On older production Blurs with finishes on the blade, they feature a DLC coating on the blade, while current production models have Cerakote applied on the blades. I personally haven't noticed an appreciable performance difference between the two finishes on my Blurs, positive or negative, given my relatively pedestrian use for most of my folding knives, just something to keep in mind if that is something that matters to you for your needs. Honestly, the only real gripe I can offer to the Blur's design is a very minor and personal one, that being the long outdated pocket clip design being unfriendly for left-handers. Even 21+ years after its introduction, its still a right side only design, so your only options to adjust how you carry it is changing from tip up or tip down. I personally am somewhat ambi, but prefer using my blades left handed and carrying my blades in my left side front pocket in reflection of that, so it's a minor annoyance when I have to fiddle around to flip it over to the correct side to deploy the blade, but really it only takes me just an extra second. Beyond my minor complaint about the outdated ergonomics, it really is still one of the best EDC buys for the price even more than two decades after its introduction. Highly recommend the Blur for anyone looking for a nice, pocket friendly blade but doesn't want to spend big bucks on a Benchmade or even some of Kershaw's more premium offerings like the Launch series of automatic knives or the crossbar locking Bel-Air series. Here's to yet another two decades for the Blur!

I'd give it 6 stars if that was possible. Absolutely superb EDC pocket knife. It has a good start as its made in the U.S. It's simple, powerful assisted open feature along with a secure safety lock that is also easy to manipulate and close the knife make one handed use both possible and easy. Out of the box there was no grit present and no roughness in opening/closing. Initial lube with CLP didn't improve functionality which, to me, indicates good design, assembly and packaging as CLP itself is a superb lube for close fitting machinery so, if its not improved it was good to begin with. The blade is 14C28N stainless steel and 'cerakoted' which adds to rust resistance. It was very sharp out of the box and while not as hard as other steels is also easier to sharpen well which is the nature of steel.

Very solid and well built, sharp out of the box. I’ve bought a few of these and given them to grandkids as gifts and they all like these knives. I have noticed that every one of these that I’ve purchased have been consistently good solid well built quality. The blade deployment, lock up, and release have consistently been great with every single one of these.

I love the knife. It's assisted opening feature is faster than some automatic knives I've owned. It has a great edge and keeps the edge. The Sandvik steel used is high grade. I use Sandvik cutting inserts at work and can tell you they are the best in the business so I wouldn't have expected any less from a blade made with their steel. The optimal sharpening angle seems to be 22.5 degrees (I use the Ken Onion edition Work Sharp). It's my every day carry knife and I cut everything with it. I'm hard on knifes and this is the only one I don't have to hone every other week so far. I also like the black oxide finish on it. It has a rubberized coating that provides a sure and no slip grip in your hand. After months in my pocket it's starting to wear down the color coating on the handle but the blade is what's important. Uses Torx screws for adjustment. But I have not found it necessary to do anything. This thing beats the pants off my old SOG Slim Jim XL. I like it so much I ordered a second. And Kershaw stands behind it. If the blade breaks due to misuse they will replace it for $10. It also includes lifetime sharpening provided you pay postage to ship it to their facility. I have never done this but it's always an option.

Only thumb flick I like. Fast opening too and come super sharp out of the box. Good build quality with every part. 10/5/2025 - Had to get stitches due to an accident. Super sharp, I recommend but this knife is the sharpest I’ve ever owned.

Quality knife, very sharp, smooth movements. This thing is as advertised 🤙🏼

This is an amazing knife. I will start with the reasons why, for me, it didn't reach a 5 star rating. My first gripe with the knife is that it does not have a deep carry clip. I prefer knives, especially larger ones to sit completely in my pocket. This clip makes it so about a thumbprint amount of knife is left sticking out of my pocket. That is a personal preference, I know some prefer that thumbprint of space so it is easier to grab, but for me, the less of a knife people see the better. Also, although the clip holds tightly and I've never had any problems with it falling out, there is a certain level of retention security with movement I feel with the deep carry pocket clips that this knife doesn't have. The other downside to the knife is the locking mechanism. It is plenty sturdy for light use, but it is not a lock that I would trust with hard use. With the rest of the knife being so great, I would prefer a stronger locking mechanism so I could get everything out of the knife that the blade is capable of. Now onto the positives. The knife is razor sharp out of the box. And the scandanavian steel can hold an edge. The blade only ever requires light touch up after hard use. The blade is also very broad and very strong. Knives are a hobby of mine an this is easily my favorite blade of any of the knife I own/have owned. The black coating is one of the best out there. The only way you are scratching the coat is by doing something that will scratch the blade itself. I have put this knife through about the same amount of abuse as my cold steel recon, yet that blade has lost almost all of its black coating while this one only has some light scratches. The kershaw assisted opening system is the best I have used. It easily tops any SOG I have owned or used in its speed and its reliability. It opens the same way every time. Other assisted opening knives can be finicky and don't always engage at the same point every time. The knife will. The thinness of this knife is greatly understated. The blade is about as long as my Ontario Rat 1, is thicker and broader, yet the knife is half the width. It isn't even noticeable when it is in my pocket, which given the size of the blade, is actually quite incredible. Of any of the knives in my collection, this one is easily my favorite even though it isn't close to being the most expensive. My personal recommendation for the knife is to get the straight edge (with the belly on this knife, serrations are unnecessary and flat out hindering). I would look for the price to be under or around 50 dollars. It is worth a little bit more in my opinion, but at that price, you will certainly be more than happy with the purchase. I purchased mine for about 43 dollars on here a couple of years ago. You will be hard pressed to find another knife with this size and quality blade squeezed into such a small and lightweight package. Even with the drawbacks mentioned earlier, I highly recommend this knife.

Great materials, great design and overall building quality. USA made for the price paid was a great deal. I felt quite dispointed by the lock system that was so close to the edge of the blade that it slipped out. I had to disassemble the knife and readjust the system. It’s not something you expect to do on a new item made in USA by Kershaw. I love the brand and I know that this knife will last for long years to come but from a customer centric point of view I expected a flawless quality control on such an important part of the mechanism. Security is of the essence. Best regards.