Corsair Hydro X Series XD5 RGB Pump/Reservoir Combo - D5 PWM Pump - 330ml Reservoir - Ten Individually Addressable RGB LEDs - Temperature Sensor - Black CX-9040006-WW

I've had the Corsair XD5 D5 Pump for about 7 months now, when paired with the Corsair Commander Pro, you can use the temperature sensor to control pump/fan speed based on liquid temperature. The Corsair XD5 is quiet, easy to install and unlike many other D5 pumps, includes 120mm and 140mm fan mounting hardware, as well as a temperature sensor for one of the G1/4 fittings (requires a Corsair Commander to use) If you are in the market for an affordable, high quality and genuine D5 pump, I can highly recommend the Corsair XD5.

Loving this so far it performs good the temp sensor is really handy to keep an eye on coolant temps and the general aesthetics are great. Easy to install and set up and the bubbles cleared fairly quickly. Fillport at the top and port on the side that you can add an optional tap like fitting means it's really easy to drain the loop or refill it when needed. Thanks corsair for simplifying watercooling even further than other brands already done. I will say this though corsair are terrible for the need of a LOT of cables but not really an issue if you have the space for them. The molex is a bit annoying though since almost nothing uses molex now. Besides that it performs and looks great and i'm happy with it.

The unit seems soldly built. It comes with a thermometer probe and it runs with no problems my 420mm radiator. It is a bit noisy over 2000rpm. I mean you can hear it if you pay attention. The LEDs are a nice to have but I don't consider them essential. It does not have 5 stars just because it needs a separate unit to work properly (A Corsair commander PRO in example )

Got this to upgrade to my old pump and its a pump / res combo, quite easy to install but i dont like the idea of installing it on the side of my radiator so i used the 120 mm bracket and installed it on the base so i needed some extra thumb screws to do this but i prefer it this way The materials they used do seem good and the pump is quiet, i keep it on 75% i think its also helped my temps how reliable it is, we will have to see but yes i do suggest this pump also they colloborated with all the top companies so its quality part also paying 5 x 30 pounds over 5 months so just before xmas this helps

I got this to watercool my system as its a cheaper option to boost performance than getting a new graphics card (seriously they are having a laugh). I've used closed loops for years and approached this with trepidation but a bit of patience and a Corsair case and it worked well. To get the lighting effects to work with the XD7 CPU cooler plug the cable from the CPU cooler into the "OUTLET" RGB on the reservoir and then plug the reservoirs RGB plug into LED port 2 on the Corsair Pro. This I wish I'd known initially anywho..patience and thought and its straightforward to do and I got less expensive fittings. Corsair I know they are quality fittings but OUCH!

I wanted to make an experiment and liquid cool my PC using external radiators (2x 240mm ones). The pump could have veen a problem,a slighlty higher authority is required with the longer pipes and the radiator that could sit on the window, dumping the heat outside. The pump did absolutely fine: the 3080 is maintained at about 45/50 degrees top, the 9700k was floating between 55 and 50 degrees, fluid temperature stabilizing at around 38 degrees with the fans running just above 1000 rpm. It is perfect. Just remember to run the pump with motherboard and gpu disconnected for at least 1 hour, possibly moving around the system (radiator in particular) so the air bubbles are pushed away. Air would completely degrade the performances of the loop or even damage parts

This pump is amazing! It does the job as it should be! The rgb lighting is brilliant on it! If I build another pc with watercooling this is the pump what I'm going to use again and again! I can only say this is the best what I have tried so far! I did try other make before since I really don't want to spend this much money on it, but now I know it's a million percent worth it! I wouldn't think any other pumps to get anymore! Only this one! But if this would be a but cheaper then I would get two for my build! I love it!

Rpm is droping . On beginning was good but after one mouth the rpm is droping every 2-3 min

Buena calidad de la bomba funciona bien, mueve 5 litros por minuto al máximo lo cual me parece poco pero funciona bien.

Pros: perfect pump do what he supposed to do. No drip easy and clear instruction. Cons: can’t remove the top do perform a deep cleaning. I saw a video on YouTube how to do it from the bottom but it’s not easy.

C'est une pompe D5 normal .. Mais comme je suis fanboy corsair ,je me suis appauvris de cette somme. Petit hic ,elle semble faire un raisonnement de tremblement sous les 2000rpm pourtant elle est fixé sur ses silentbloc d'origine et sur des Phanteks D30 qui ont aussi des pads en caouthouc anti vibration... Mise à part ça, très belle pièce comme d'hab chez Corsair

This water pump is absolutely amazing!! I bought this for my husbands computer and I was Extremely happily surprised when it proved it's absolute quality and power! It's actually quite pretty too!!

Easy to install, looks great and comes with a water temp. Sensor which is amazing to have! Only issue is that you have to buy the commander pro for it to actually work which is going to run you around $75. But other than that assembling it was a breeze and I’m pretty new when it comes to water cooling. Material on the white part is plastic, which isn’t too bad, but it’s definitely not Ek quality. Other than that it’s a great product and with the Icue software it’s works amazing as of right now