Scotch Restickable Squares, 0.5"x0.5", 72 Count, Clear Double-Sided Mounting Pre-Cut Squares, Remove Cleanly, Photo-Safe Adhesive, Mess-Free Application (R103)

Scotch Restickable Dots were exactly what I needed to keep my busy light securely attached to the top of my monitor. The light originally came with its own adhesive dot, but it kept popping off over time. Since switching to the Scotch Restickable Dots, the light has stayed firmly in place, proving that these dots do exactly what they’re meant to do. However, I would caution against using them on surfaces or items where you don't want any potential damage or residue. They are extremely sticky and could possibly peel paint or leave marks on delicate surfaces. Despite this, for situations where a strong, reliable hold is essential, these adhesive dots are a great solution.

I use these primarily for hanging up small prints and for mounting models for painting. Prints: They don't handle texture too well since the can't mold to the surface, but for smooth materials they're awesome. I've had a poster up on a 45 degree ceiling for over a year and it's still going strong. Mini Painting: These are awesome for painting miniatures, especially ones you haven't yet got on a base or for components that won't get one. You don't have to worry about sizing, none of the model gets hard to reach because of the holder getting in the way, and the adhesion is strong enough to hold everything firmly for painting but not so strong that you risk breaking anything when removing it. Reusability: I have been using the same dot for my painting handle for a couple years. It loses adhesion over time as I get paint and dust on it, but with a little bit of rubbing alcohol, or soap and water for stubborn bits, it goes right back to sticking just as good as when it was brand new. Mini Painting Handle Setup: A banister topper from the hardware store attached to a piece of scrap 2x2. I used the bannister topper instead of just putting the dot on the 2x2 directly because it's more comfortable to hold.

These are a brilliant product. They are super easy to use and do exactly what they’re told. They stick well and are easy to remove. I’ve used them on metal, concrete, glass, and painted walls. My only complaint is they don’t hold onto items as well as I’d like. For example, I bought these to hold balloons upside down on a ceiling, balloons hardly weigh anything yet I couldn’t get the balloons to stay up! (They’d stay up for maybe 30 minutes) I’m not sure if that’s because balloon string doesn’t stick well to these or gravity is truly to blame but that was a bit disappointing. These also don’t stick as well when they’re really cold. I used these to hold up my Halloween decorations onto my front window but when the weather dropped they didn’t stick nearly as well. Overall, brilliant product, I’m thrilled to have them and use them all the time but they’re not entirely perfect.

I have a flic button that I install and remove weekly on the organ that I play for worship services. When that adhesive stopped working, I needed another solution. That's when I found these Scotch Restickable Dots, 7/8-in, 18 Count, Clear Double-Sided Mounting Pre-Cut Dots, Remove Cleanly, Mount Objects on Stainless Steel, Plastic & More, Photo-Safe Adhesive, Mess-Free Application (R105). They are the PERFECT size and stickiness for my flic button. Each dot holds securely, removes cleanly, and is very durable, lasting for several months of weekly use. There's the perfect amount of stretch to allow for some flexibility, but not too much. The thin dots don't draw attention to themselves, and don't provide excess bulk. In fact, they're a little thinner than the adhesive that came with my flic button. I also used one of these dots to add a heavy-duty brass knob to the top of a plastic dome for a cheese tray for my parent's 50th anniversary party. It held securely and removed cleanly at the end of the evening. The clear appearance keeps them from drawing attention to themselves. I'm very pleased with this product and will continue to purchase it regularly for my flic buttons.

These tabs are easier and more elegant to use than sticky tack. It's nice that the clear tabs are completely unnoticeable when mounted on the wall. However, the quality of the adhesive is too poor for hanging any paper heavier than a standard letter-sized sheet of printer paper. Several posters and pieces of work were damaged when they came loose and fell off the walls during the night several hours after they were mounted. I took the precaution of adding a few more adhesive tabs to these heavier items even though the package states they would hold up to half a pound (the back of the package says four tabs hold up to 0.25 lb), but apparently more is not better in this scenario (and fewer tabs is certainly worse as the items came off the walls right away). Because I can't return the opened package, I will use the remaining tabs as non-slip feet for objects resting flat on desks and tables. They just don't perform well enough for mounting posters on walls when compared to trusty sticky tack or Command strips. Spend a couple extra dollars on a better product to avoid damaging your decoration. Other notes: Supposedly the adhesive tabs can be washed when they become dusty and lose stickyness. The tabs I used were fresh from the package but still would not hold up overnight.

I used these squares to stabilize a small piece of a lightweight sculpture inside a plexiglass box. It works very well and is invisible after use.

Doesnt stick well to the wall. I tried to stick postcards on the wall but they kept falling.

I love these! They work best on flat surfaces and have the strength of a small suction cup or magnet. Their adhesion is great, but they remove without leaving any residue. Best of all, they can be rinsed off and used over and over again! I've used them on whiteboards, mirrors, windows, walls, doors, metal, plastic, ect. Obviously they can't hold a ton of weight, but are perfect for displaying kids art on the fridge, notes on the door, small signs on windows, ect. I've used them to secure glass knick-knacks on shelves and I've even used them in my fridge to hold plastic charcoal packs on the wall. I've had a couple holding a plastic suncatcher on my skylight (which gets horrible condensation, moisture, direct sun, and cold) but it's still going strong 4 YEARS LATER! Hasn't fallen off a single time even though it's upside down so gravity definitely has the advantage (suction cups would only hold for a week). Seriously I love these things!!!

Wanted to put up some small metal signs in my sons newly decorated bedroom and didn't want to damage the wall paper. Put a lot of squares on the back of the sign but it kept falling off the wall. Resorted to using bigger roll of tape, which worked much better.

Ich bin total begeistert von diesen Klebestreifen. Sie halten bei mir Acryl Fotos an einer Vliestapete. Die Fotos lassen sich einfach wieder ablösen und die Klebepads sind sogar wiederverwendbar.

Scotch de bonne qualité, fait le travail demandé. Je fais confiance à cette marque depuis longtemps et les onglets sont bien pratiques bonne idée pour une fois !

lo instale en una pared recien remodelada, con pintura nueva sin polvo y lisa, era un pequeño cuadro con marco de madera, no lo sujeto, en menos de 30 minutos ya se habia caido dos veces, tremenda decepcion de un producto de esta marca (demasidado caro para no funcionar)

They're about the size of a quarter and adhesive on both sides. I used on to stick a Tile (device tracker) to the back of my remote so I know where the remote is when the kids have been playing with it. It's holding perfectly for over a month now. Great stuff!