97“ Pressure Washer Extension Wands

I got this for my home power washer to clean the second floor exteriors of dust and grime. It was easy to set up and connect all the pieces. I bit heavy if you use all the pieces but it worked well and there were no leaks.

This pressure washer extension wand set works exactly as described. The stainless steel wands feel sturdy and well-made, and all the connections fit tightly with no leaks. I really like that it comes with multiple nozzle tips (30°, 90°, 120°) and curved rods — makes it much easier to reach under cars, gutters, and tight areas. The quick-connect system is convenient, and the included O-rings are a nice bonus. I’ve used it on a 4000 PSI washer and had no issues so far. Water pressure stays strong and consistent. Overall, this is a great value kit with plenty of accessories. Perfect for home use, car washing, driveways, and hard-to-reach spots. Would definitely recommend.

This item is very useful when used within its design. I used a gas powered 3100 psi 2.7 GPM Generac with this extension. The ability to extended 10ft enabled me to SAFELY complete a two story pressure washer job the would have otherwise required the rental of a lift ($1500 +/wk) or a scaffold ($250+/wk). when used with a 12 ft step ladder, I could easilly reach the top areas (26ft) without using a very risky and slow extension ladder. The ability to add or remove sections is also great as you can shorten when 10ft is too much. It is well built and comes with plenty of replacement o-ring pressure seals. Some notes from using- you will need a couple of adjustable wrenches (or 3/4, 19mm) to tighten the tube sections- hand tight WILL NOT work due to pressure and vibration movement. The two included angle fittings are nice, but be cautioned, these will only work on shorter wand sections, as the lateral force generated WILL cause the wand the thrust away very quickly with force and you WILL NOT be able to control it due to physics. So, I would advise only using the angled couplers on shorter sections. The spray nozzles included worked well and are a great plus and value. I would advise when using the 10ft extension to try and keep the wand in a more vertical position than a true horizontal, as once again, gravity and the leverage of physics will show you what they can do by causing slight wand sag and torque to your body (think shoulder arm arm strain). Overall, this is a real jobsaver and great value. My only reason for 4 stars is due to the limited extension length /use of the included angled couplers- but that is more of a law of physics issue than a design flaw (yes, a support brace could be constructed, but costs would go up considerably and we wouldn't be talking about a $32.00 purchese). Overall, highly recommend and I wouldn't want to be without this item again.

I bought this set of nozzles for my pressure washer and I've been quite impressed. It comes with many useful parts, such as wands with different angles, various colored nozzles, and replacement seals, making it a very complete kit for different tasks. The quality feels solid, the connections fit well, and I haven't had any problems with leaks. The nozzles are easy to change, and each one performs its function according to the pressure you need. It's a very practical kit.

Works well, not heavier than expected and the connections (most) seem to be made well. Only used for about 1 hour but already put the different angled ends to use. No issues with the fit or the assembly, pretty straightforward. Only issue is a leak on the first extension (the one that is required to use any of the other extensions) but at least I get a nice misty shower while I work.. without the leak could easily be 5 stars. Good value, useful product.

After reading the reviews I was leery about these extensions. When testing I proceeded with care, giving myself plenty of room to allow for out of control behavior. I was also concerned with taking a shower after connecting/disconnecting the segments several time. I quickly found there was nothing to be concerned with, as long as you think about what you are doing. Yes, if you connect a 90 degree nozzle to the end of a 10 foot shaft and add pressure it will tend to push in the opposite direction of outflow, it's a jet. I did not find that controlling this effect was difficult, in fact it helped in lifting/controlling the fully assembled extension. These extensions were fully capable supporting their own weight and handling the pressure, no issues with construction. I assembled and disassembled them to various lengths and did not have any leakage and did not need to change the o-rings. Overall I am pleased and have used these extensions many times. My only complaint is the individual nozzles are not labeled for pressures, but I figured out which was the strongest and which was the weakest pressure. Also the bracket to hold them doesn't stay connected to the rods as shown, it comes off very easily. Outside of that I wouldn't change anything. Well worth the price.

I use these with a Ryobi pressure washer. All useful, especially the extension arms and angled heads. Good quality.

Recien hice una limpieza con la hidrolavadora, y la pude realizar a nivel de piso con estas extensiones que me fueron de gran utilidad, con la lanza de 90° llegue a lugares donde no podria con una lanza recta!! muy utiles para alcanzar esos lugares dificiles de llegar

Mi hidrolavadora no es de las más grandes que hay en el mercado y pensé que perdería presión al momento de agregarle la lanza y no pasó nada de eso, trabaja súper bien, las lanzas se adaptan fácilmente unas a otras quedando firmes, estoy muy contento con esta adquisición.

Works great! I pressure washed everything from gutters to high awnings (no ladder this year). I could even stand straight to be consistent while I cleaned the driveway. There is some flex if you use more than one extension but it’s not a bad trade off instead of using a ladder.

Great product was able to stand on the ground and wash the house and RV.