Omix-Ada | 16526.02 | Oil Seal, Front, Inner | OE Reference: 8121781 | Fits 1972-2006 CJ/YJ/TJ/XJ/ZJ/WJ/MJ/SJ with Dana 30

seem to be good quality ,time will tell.. installed them on jeep tj with dana 30 fit was good just keep straight when installing not to bend 36 mm socket worked as a punch inner axle seal front both sides about 3 hrs total from start to finish worth the work no more leak while you are there check them brakes ?

Great seal for my 93 YJ Jeep and it fit perfectly too. Three years and still holding on. Just clean the shaft before install.

Bought two of these for my 06 TJ Dana 30 diff. I was installing a spartan "lunchbox" locker, so decided to replace the axle seals while I had the diff apart. I used a piece of pipe to punch out the old seals and cleaned out the axle tubes as much as possible. I cleaned up the area the seals seat and then started the reinstall. As some have mentioned they were a *very* snug fit. I ended up having to be a little creative to get them in. I placed the seal at the opening of the axle tube in the diff. Then I used a large socket and placed it over the seal while inserting a piece of pipe through the opposing axle tube and pressing on the socket. I basically pressed the new seals in by tapping on the pipe and driving them into place. I could have never pressed them in by hand and the angle was not right to really be able to tap them in with a rubber mallet or something like that. The seals went in and looked good, but I could understand why people would have trouble with them. I probably should have looked up a few youtube videos for tips, but luckily I got them in before I had to call for backup.

A+

Excelente calidad

Went in fine, haven't tested them yet because my jeep isn't finished. Hopefully they will hold. They didn't seem real high quality but that remains to be seen

Don't count on hammer these into the case. You need the installation tool.

I think anytime you can purchase and install the same quality part in your machine that has thousands of miles without a single failure, then you can rest assured that you can count on thousands of more trouble free miles. These seals are pure quality and they were delivered right to my post box azap. This is an important fact because I happen to live on an island out in the Bering sea. I would highly recommend these guys and their parts.

THEY WORKING BUT DOESNT WORK GREAT WITH INNER SEAL INSTALLER FACTORY ONE WORK BETTER.HAD TO MAKE SOMETHING TO INSTALL SEALS.

I ended up buying OEM seals for 2003 Jeep tj axles. These ones were cheep and flimsy. Only one lip.

Needed these and was working outside on the ground in the dark wasted an hour trying to get them in to find out there 2 thou too big