AC Infinity, AIRLIFT T10 Shutter Fan 10”, with Temperature Humidity Controller

Bought it in preparation to exhaust air from my two car garage in the summer months. Prior to knowing this fan existed (stumbled onto it by mistake) I initially bought the typical 12” galvanized shutter exhaust fan to pair it with an Inkbird temp and humidity controller but found out the stud spacing above my garage side door was only 14” wide. The 12” fan was 14.5” wide so I had to return it as it wouldn’t fit. While searching for a 10” model exhaust fan, I found this AC infinity with built in temp and humidity controller which works great and looks sleeker IMO to the galvanized fan! Installation was a breeze once you cut out the appropriate hole in the wall. Air Movement is great in level 5 (out of 10) for my 2 garage space (290 sq ft) with minimal noise. A fan speed of 10 is fairly loud like a huge box fan but does also move lots of air at that speed too. Will have to wait till summer to see how much cooler it gets and how much humidity it can exhaust outside. One minor negative is the sides and top of the shutter has gap of 1/4” or so. I had to use some different thickness of one sided foam tape to fill in the gaps while still allowing the shutters to open freely. Now the gaps are 1/8” or less. Overall, I’m happy with the initial purchase but wish they had a model with WiFi controllability. I will gladly pay $40 on top for that as an optional feature. Also, maybe have a programability mode to set schedule for days (M-Su) and hours when the fan can kick on/off will be cool too! Nice job AC Infinity

I am reviewing the S10 model and I bought an Infinity 67 controller to replace the one that comes with the S10. This is one of the best purchase I have made, this is an Amazing fan when coupled with the 67 controller. This is the iPhone of Fans, it just oozes quality. The 10 speed selection even on the 10 inch model can take you from a quiet gentle air flow all the way up to Cat 5 hurricane! This thing is insane on full power but of course is a bit loud, but still it is quiet given the amount of air it is pulling. I found that setting FIVE is the point when the fan is producing the most air flow yet is still very quiet. The great thing is that the fan is very linear in it's speed, as the rotations are accurately controlled by the PWM circuit and it really shows in just how agile it is at getting the air flow smoothly transitioning. When coupled with the 67 controller it becomes a complete package, with the one that is supplied in the box it is just a a Fan with manual 10 speed selection. Luckily you can buy the S series plus the 67 controller for just a few bucks more than a T series Fan and you now have the perfect combo. The controller has one of the most accurate and responsive thermometers I have seen on a consumer device and it tracks temperature and humidity changes almost instantly. Once its set to control the Fan they work in perfect harmony. The fan just ramps up and down proportionately to the Temperature or humidity changes in the room and keeps the area at the exact set temperature. I don't want to go into to much detail on the controller since this is a review of the Fan itself, but needles to say I am extremely happy with high quality of the fan even by itself. I cannot ever go back to another model extractor fan after using this one.

I have an 18x10 shed that has a storage area on one side and a built in workshop on the other. It was getting very hot in the summer. Luckily, the shed had gable vents on each side, so I cut out one of them and installed the vent in the opening. I wired everything and it worked like a charm. The controller/thermostat was confusing to set up but the phone app and Bluetooth are fantastic. I could set up all the settings from the app and the interface was very intuitive. So. I actually set up the temp and humidity settings for the fan to automatically come on directly from the app-super easy. And the fan is relatively quiet and adjusts speed as needed. Yes, you can hear it running, but it isn’t a nuisance and considering how much cooler my shed is, I don’t really even notice! In fact, when I was showing off the shed to my brother in law, he couldn’t believe how the shed wasn’t that hot, and then I showed him the fan! Great product, easy to install, quiet, and the app is fantastic!

This fan is amazing. Bought it for the purpose of clearing the air out of my garage. I smoke and it does exactly what I needed. Clears 450 sq ft of space in 3 minutes or less. I cut a hole in my upper garage door panel and installed it and it’s not too heavy and does a great job. I have had this fan over 4 years and have had zero problems. Sometimes running it 24 hours a day for several days at a time. It’s gonna make noise. It’s a fan. It has ten settings and is loud in my opinion after setting 5. It’s worth the noise to do what it does. It will also reduce the temperature by a few degrees as well as the humidity by as much as 5-6 degrees. I have a more modern garage as a note but if you seal up around the doors and insulate the doors you’ll have great results. You’ll thank me later.

The unit is well made, nice black finish, quality easy to read LCD, easy to program. I have my unit mounted vertically and has no problem with the vents opening at speed 4. The fan runs quietly. I'll have to see longevity, but I only have the fan to run at over 89F or over 65%RH, and at speed 5 (out of 10). It provides sufficient air circulation pulling hot air out of my ~900 sq ft space supporting my air conditioner much more efficiently. The only reason why only 4 stars out of 5 is because there is are fairly wide gap between the vent slats and the bezel so insects can easily get inside, also I suspect during the winter the gaps will cause cold draft to come inside my space so I will need to make a cover for it.

Für meine kleine Werkstatt die perfekte Anschaffung. Durch die 8-stufige Geschwindigkeitsanpassung lässt sich dieser Abluftvetilator, beziehungsweise die Absaugwirkung gut auf die jeweiligen Bedürfnisse anpassen.

I bought this (10 inch model) for a small LAN closet that gets way too hot in Summer, reaching 40C on hot days. The size of the room is 4 by 8 feet. An A/C unit is not feasible in tis room. I set the fan's sensor to kick in when the temperature reaches 26 C. It blows my mind how fast this fan decreases the temperature to 25 C. Literally in about 30 to 40 seconds on a hot day (30 C outside). My only gripe (minor) is that the controller that comes with the unit is not as sophisticated and flexible as the ones that come with their A/V and rack mount fan systems. It still does what I need though, and I was fully aware of this so no points taken for this. Overall - very happy with the purchase, and highly recommended.

De buena calidad los materiales, solo lo único negativo es que no tenga opciones de idioma en español, tanto la app y el instructivo físico, lo demás está muy bien, fácil de programar y usar.

Use this fan for venting garage as well as venting small airbrush paint booth. This fan is amazing. Is well made and very quiet. Very pleased with this item.

There’s better options on the market. Don’t waste your money on this one.