Mud Flaps for RAV4 19-22

They fit. Installation was a breeze but have to be patient removing the 4 front clips so they won't break. Idk if it was my model which is the 2026 LE made in Canada but the rear driver side was missing a hole so I used the other 2 to install and the clip which worked fine.

Easy to install and fits perfectly for my rav4

Fit great. Love the price, look awesome with my new Falken Wildpeak AT tires on my RAV4. Minor drilling to get rear flaps to mount. A+

Would give it 5 stars if it had all the correct plastic rivets instead of the stupid screws. Nonetheless fit like original Toyota equipment where all the holes line up. Others said it was easy to install but for me it took 3hrs. I did not use the screws and used plastic rivets in the screw holes and also added an extra hole to get rid of the gap on the top. To drill the holes, i used a right angle drill attachment, otherwise i would had to remove the tires for the back. The front ones has a hole that needs a plastic pop rivet that they did not supply since there is 2 holes on the bottom aspect. My install took some time but it is solid, wont be falling off at high speeds in CA highways. Probably can install in hour if you go easy peazy half hearted and do the minimum. This mudguard is probably the only one on Amazon where the front pieces runs all the way up to the plastic trim. Almost bought the other brand until i seen a review with a 2in gap in the front between the mudguard and fender trim. Check my pics.

Installed in the front wheel wells of a 2024 RAV4 Hybrid LE. The fit is very good. ( I did not need mud flaps in the back, so can't comment on the fit there.) I've driven the car a few hundred miles since installing these. No extra noise, they haven't loosened discolored or bent. All good. I can't say they cut down the road dirt, but I don't seem to have as many added paint chips down the side of the car that I was getting from our chip-seal and gravel roads. Easy to install. The fender liner where the flaps attach has two retainer clips to remove, and 3 screw grommets that you do not remove. The top screw grommet is not used; it lies above the mud flap that will be installed. One retainer clip will be at the top of the mud flap, the second is underneath the car and lines up with the mud flap hole at the bottom of the mud flap indentation. Remove the two retainer clips on the fender liner by popping up the center pin and then working the clip loose from the car body. The clips are different length, so make sure you note which hole they came out of. Line up the mud flap with the car body and holes. Use the screws provided to screw the mud flap into two screw grommets, and then replace the two retainer clips. The top retainer clip will be hard to replace because it is short and the added thickness of the mud flap will make the fit tight. I had to use a tap hammer to get the center pin back into the retainer. The retainer clip that goes in under the car is longer and there wasn't a problem getting it back in.

The mud flaps fit my 2023 XLE Premium Hybrid perfectly and feel extremely durable thanks to their thick, heavy-duty plastic. Key Takeaways & Installation Tips * Fit & Build Quality: They are very sturdy and custom-molded to fit the body lines seamlessly. * Avoiding Gaps: Hold the mud flap firmly against the body with no gaps while driving in the first screws. This keeps everything locked into position for a flush finish. * Screws & Hardware: You don't need to use every single screw. I left off one screw per mud flap—the bottom front ones, and the inner rear ones (which are tough to reach without taking off the tire). As long as the rest are torqued down snug, it holds strong. Plus, the original OEM clips pop right back into place over the mud flaps. * Note for Hybrid Owners: You will need to drill two middle holes into each mud flap during installation. Just keep pressure on the mud flap while drilling to ensure no gaps form once you screw them in.

Perfect installation 2023 rav4

Its a perfect fit.

Il aurait du avoir un guide d'installation , ou mettre les autocollants ou une vidéo sur l'article pour la pose , pour la durabilité , on verra avec le temps !

Buena calidad, hechos a la medida. Solo en los delanteros un agujero no coincide, tienes que perforar, decidí no hacerlo por qué arruinaría la garantía anti corrosión. Las grapas que trajo no fueron suficientes, conseguí similares en autozone, en algunos casos tuve que rebajar la grapa para que ajuste. Pero quedaron muy bien. Estoy satisfecho

Excelente producto y de buena calidad, gracias

Amazing fit and great quality.

ممتاز