BOSCH CO14B 14-Piece Cobalt Drill Bit Set With Case

This BOSCH Cobalt M42 3/8" drill bit performs extremely well, especially on hard metals. It made drilling feel almost effortless. Fit: Fits securely in standard drill chucks thanks to the three-flat shank design, with no slipping during use. Size: The 3/8" size is accurate and consistent, making clean and precise holes in various materials. Ease of Use: Very easy to use. It stays stable while drilling and doesn’t require excessive force to cut through tough metal. Compatibility: Works well across a range of materials including stainless steel, cast iron, and aluminum without issue. Case: Packaging is simple and protective enough to keep the bit safe during storage and transport. Appearance: Clean, professional look with a solid cobalt finish that reflects its heavy-duty design. Overall, this drill bit performs like a high-quality tool should. It cut through hard metal almost like melted butter, making it a reliable choice for demanding drilling tasks.

Drilling wood is a lot easier on bits than drilling steel or cast iron, but working with hard woods (like bubinga, rock maple, and Brazilian rosewood) dulls them down pretty fast. I'd sharpened the 1/8" bit in my full bit-set so often that it was too short, so I needed another, and thought I'd get Bosch, I'd heard they're quality tools. I bought an extra for the small collection I keep in my drill/driver case, since I use the 1/8" bit more than any of the others. I just received the two Bosch bits last night, went out to finish a shelf project where I had to drill about 40 1/8" holes in rosewood, 1/2" deep. I put this bit in my drill press, and it went into that hardwood like it was butter, no tear-out around the holes, and it's still sharper than I can get on a Drill Dr. I can't say how long it'll stay sharp, but so far I'm impressed

I have lots of drill bits and none of them would drill two holes in a medium thick sheet metal - very frustrating. I researched on-line and determined that Cobalt drills should work, and they did nicely. Amazon delivered super-quick and I drilled my holes as needed. These are great! I am gong to stick with cobalt drills bits in the future

I never knew the magic of cobalt drill bits until I needed to drill some mounting holes on a steel bench grinder stand. The top of the stand was 3/8 in steel plate and it probably took 20 minutes to get through it with a standard bit. I did some research and ordered these bits. I don't need 50 different sizes because I'm not drilling metal frequently. This Bosch set seemed to be one of the few affordable sets that included the 1/2-in size. Plus... All of the bits above 3/16 I have a three-sided flat grind for better chuck lock up. Used the 1/4 in bit for a pilot and then the half inch bit to drill the remaining three holes. Less than 1 minute per hole, including the pilot, using a bit of cutting oil. It really is like magic. I'll be testing these to drill out a broken bolt in my mower deck next. I will update this review if I experience any durability issues. UPDATE: That broken spindle bolt in my mower deck must be special. Using low speed, a lot of pressure, and cutting oil I made it about a quarter inch into the bolt before dulling the bit. Switched to another bit and made it a bit further before killing that one too. Even with a decent hole drilled in the bolt, my extractors won't grab the hard metal. I'm not going to deduct a star since I didn't expect these bits to be invincible but hope this helps someone determine if these will work for your use case.

Good price

Look no further. Bosch M42 drill bits are the best available. They are very sharp. They last. They will drill stainless steel nicely if you go very slow, use pressure, and do not under any circumstances let the bit spin (that will work harden the material and make it nearly impossible to drill).

It started with my wife saying in an unusually calm voice, “Can you come here (kitchen), please. I need help.” This was not something that was about to fall or burn. There was plenty of time. She was calm but there was something else in her tone of voice that I’m unaccustomed to hearing, which put a smile on my face even before the reveal. I didn’t see anything wrong. She moved the pan off the stove and showed me the lid was stuck and would not budge. “I was cooking and placed the lid from one of the soup pots kind of sideways over the pan. As it warmed up, the lid slid down and I can’t remove it. It’s stuck.” I tried. It was ‘sucked’ into the pan – a vacuum seal. Of course this was a new, high-end pan. My instructions were that it was OK to destroy the lid but don’t scratch the pan! I tried using kitchen wooden spoons for leverage and could have broken all of them. I wanted to boil the lid off but my bride of 25 years didn’t want the explosive approach leaving detritus around the kitchen. Although I sorely wanted to hear that "Pop!", I couldn’t argue that point. So off I went to the garage, laughing, holding a hot pan with a spot-welded lid on, or rather, in it. I used a hammer and a punch to make a vacuum breaking hole in the stainless lid. It was rounded and punched back. I tried to drill the hole with old carbide tipped bits. It was highly polished stainless and the bit slid around within the punch zones like it was playing hop-scotch. After polishing several old carbide bits to baby’s bottom smoothness, I punted for the evening, leaving the, to me, mystery meal, in a covered pan in the garage, a frustrated shady tree mechanic first. The next day I took out the big gun. A reciprocating hammer drill I acquired from a pawn shop before I learned how pawn shops acquired such inventory. And I had ordered new Bosch Cobalt drill bits from our friends at Amazon and they arrived immediately. I was taking no prisoners. That was a vacuum seal and all I had to do was put the smallest hole in the lid without de-flowering the pan. The new bits and the Terminator hammer-drill did the trick. But the hole made no difference. The lid winked at me and remained locked on. It was here to teach me something. This had become personal. When the audience knows you spent $30+ on drill bits and you don’t complete the job, ‘You have some ‘splaining to do!”. And you lose rank. Neither appealed to me on this rainy Sunday. It was time to get creative and invoke my inner brute. First, I had a lifetime supply (a toothpaste-sized tube) of food grade grease for drinking water o-ring seals. I decided to apply that over-priced vasoline around the lid in case it started to move. Next, I heated it with a heat gun, which I’m sure only warmed me up and didn’t affect the outcome. Then I decided I needed a rig that would suspend the pan by the pot handle on the lid so that in my brute-inspired rage, I could literally hammer the pan away from the lid using a nylon mallet. After some tinker-toy-like playing around, 2 two by fours, one on each side of the pan were to become the test bed for this gravity experiment. Across the 2 2x4s and through the handle I placed a perfectly shaped crow-bar-ish tool. It was wide and extremely hardened steel. The pan’s handle went under foot ,suspending my target impact-zone- the edge of the pan opposite the handle, at a perfect height and distance for the seated me to wale upon it in well-deserved vengeance for the two hours of spousal humiliation this contraption had foisted upon me. Now was my time for targeted violence, and by Amazon same-day service, I was going to have it! When you set up one of these not exactly industrially hardened rigs, and contemplate sudden impact at close proximity to the target, the unforeseen consequences always feel invited to attend the goings on. Having welcomed my fair share of such irritating and, if you chose to look at it this way, educational fiends, I was in no mood for them this time. The pan must be unscratched. Corrugated cardboard went underneath the entire rig, knowing it would blunt the force of my politely sized mallet. I knew the Workshop G_ds wanted the contents to launch heaven-ward and distribute themselves evenly around the garage, including the car, my bikes, and tools. The rig was ½” off the ground and I felt contents vomit potential was mitigated. The pan handle was ensconced in an old but, as yet, unused in the garage, t-shirt of mine and was under the sole of my padded shoe. Nothing was left to chance. I took a warm-up tap to see what might be waiting to bite me in the …. Nothing. The crow-bar-ish tool moved. I repositioned it with one end biting into the 2x4. Another firmer tap. Nothing moved or slid. This could work and without drama. I knew that was the voice of an optimist inviting wicked consequences. I took the mallet up high and smote that deviant pot (credits to the funniest song that I and my father ever heard by long gone folk-singer, Gamble Rogers, “Door to Door Bible Salesman”) at the far rim. And it just worked. The lid hung in the air, suspended 1/2" over. the pan which sat, contededly, on the corrugated cardboard of the garage floor. Those drill bits worked ;)

Anything bosch makes is good, but i feel like they have it down pat when it comes to stuff like twist drills and bits. The M42 cobalt keeps the drill from getting too hot and also acts as a "lubricant", both contributing to keeping a sharp cutting edge, giving it quality and ease of use. These factors reduce the need for either resharpening, or worst, replacing the drill. The cost of cobalt bits are what scares people away, but if you're gonna be using it more than 2 or 3 times, its worth the upgrade from black oxide or a coated bit, thus giving it great value for money. The "M42" is a reference for the amount of cobalt used in the "material makeup" of the bit, with 8% cobalt being used in M42, and 5% cobalt in M35. Both are great options, but i recommend getting an M42 version when possible. The use of cobalt doesnt change the size or shape of the drill, although some will have different flute counts and designs, some tips have a "no pilot hole" start and some will have different degrees of an angle at the head to help with different types of material. Overall, storage capacity will not change unless you opt for different lengths, such as mechanics and aviation length. To sum this up, this is a great drill that should last a long time if used correctly. Bosch is very prevalent in my drill cabinet, so dont be afraid to spend a little extra and get the good one!

El funcionamiento de esta broca es muy bueno, se pueden hacer fácilmente perforaciones al metal

Great drill bits.

Quality material.

Buen producto especial para taladrar acero inoxidable

Alles Gut